• Journal of Electrochemical Science and Technology
• /
• v.8 no.2
• /
• pp.162-168
• /
• 2017

$LiNi_xCo_yMn_zO_2$ cathode materials have been the focus of much attention because of their high specific capacity. However, because of the poor interfacial stability between cathodes and electrolytes, the cycling performance of these materials fades rapidly, especially at high temperatures. In the present paper, we propose the use of tris(trimethylsilyl) phosphate (TMSPO), which contains phosphate and silyl functional groups, as a functional additive in electrolytes. The addition of TMSPO resulted in the formation of cathode electrolyte interphase (CEI) layers on the surfaces of the cathodes and effectively suppressed electrolyte decomposition reactions, even at high temperatures. As a result, cells cycled with TMSPO exhibited remarkable capacity, which remained after 50 cycles (82.0%), compared to cells cycled without TMSPO (64.6%).

• Nuclear Engineering and Technology
• /
• v.45 no.5
• /
• pp.689-694
• /
• 2013

A duplex stainless steel sheet with 1 wt.% gadolinium was fabricated for a neutron absorbing material with high strength, excellent corrosion resistance, and low cost as well as high neutron absorption capability. The microstructure of the as-cast specimen has typical duplex phases including 31% ferrite and 69% austenite. Main alloy elements like chromium (Cr), nickel (Ni), and gadolinium (Gd) are relatively uniformly distributed in the matrix. Gadolinium rich precipitates were present in the grains and at the grain boundaries. The solution treatment at $1070^{\circ}$ for 50 minutes followed by the hot-rolling above $950^{\circ}$ after keeping the sheet at $1200^{\circ}$ for 1.5 hours are important points of the optimum condition to produce a 6 mm-thick plate without cracking.

• Archives of Pharmacal Research
• /
• v.13 no.4
• /
• pp.298-305
• /
• 1990

Based on equal number of cells, supplementation of 10$^{-6}$ M cadimium highly simulated the intracellular amylase. GCT, LDH as well as the glucose and erea content of E carotovora var, carotovaro cells. This was coupled with initiation of highly active GOT, CPK as well as accumulation of cholesterol in the cells. Lanthanum was less active and unable to initiate COT or CPK. Nickel was almost without effect though reduced LDH activity without initiating either enzyme or cholesterol production. Similar stiulations and/or initiations were observed, though to variable extents, when the same concentration of the three elements were supplied to E. carotovora var, citullis or E. toxica. The highest yield of amylase, GPT, GGT or glucose was obtained when E. carotovora var. carotovora was supplemented with Cd + Ni. The highest urea level was recorded in Erwinia carotovara var, cirullis, amended with Cd + La.

• Journal of the Korean Chemical Society
• /
• v.13 no.4
• /
• pp.309-312
• /
• 1969

A series of metal ion-2, 5-diamine 1, 4-dihydroxybenzene polymers containing copper(II), nickel(II) or cobalt (II) have been prepared. The structure was postulated on the basis of elementary analysis of polymers. It was found that copper polymer is most likely the coordination polymers by X-ray powder pattern studies. The thermal stability of the polymers was also studied by a simple method, utilizing a thermogravimetric balance. The order of thermal stabilities is Cu(II) > Ni(II) > Co(II). The polymers start to decompose at a relatively low temperature.

• Proceedings of the Korean Powder Metallurgy Institute Conference
• /
• 2006.09b
• /
• pp.1076-1077
• /
• 2006

Conductive pastes consist of conductive fillers( Au, Ag, Ni, Cu etc.), organic binders, solvents and additives. Meanwhile, there are some metal powders such as copper, nickel etc that are used for pastes which have serious surface corrosion problems. This problem leads to change of the color and decrease in conductivity and affect storage stability of conductive pastes. By using silane coupling agent and dispersion agent, we can ensure both the corrosion stability and long term storage stability, and enhance the high performance electrical and mechanical properties of EMI shielding silicone sealant.

• Journal of Microbiology and Biotechnology
• /
• v.11 no.1
• /
• pp.7-12
• /
• 2001

Three Pseudomonas strains (Bk8, Bk9, Bk10) selected from soil for their ability to degrade herbicide diuron were tested for their heavy metal resistance. The growth of these catabolic strains on a minimal medium with various concentrations of $Cd^{2+},\;Zn^{2+},\;Ni^{2+}$, and $Hg^{2+}$ revealed a minimal effect on the carbon source for the inhibitory effect of the metals. One of these strains, namely, Bk8, exhibited a high resistance to the heavy metals as compared to the two other strains. This strain harbors plasmid pBk8 (110 kb) and contains at least fur determinants encoding heavy metal resistance. Nickel and zinc resistance are encoded by genes located on the chromosome, while cadmium and mercury resistance are on plasmid pBk8. Accordingly, the characteristics of strain Bk8 suggest that it would be useful in the bioremediation of aromatic compounds in the presence of toxic heavy metals as co-contaminants.

• Bulletin of the Korean Chemical Society
• /
• v.27 no.4
• /
• pp.573-576
• /
• 2006

• Proceedings of the Korea Committee for Ocean Resources and Engineering Conference
• /
• 2001.05a
• /
• pp.344-349
• /
• 2001

This paper was to investigate of a adhesiveness for the plasma sprayed coating materials did salt spray by acoustic emission method in tensile loadings. The powders used for the coating were nickel aluminum composite powder Ni-4,5wt.%Al and titanium dioxide powder Ti02. These powders were coated on a carbon steel S45C by plasma spray method. The salt solution was a 5% NaCl and the salt spray times were 2, 5 and 10 hours respectively. The salt solution penetrated into the surface of the substrate through pore of the coating layer built in the process of plasma spay. Corrosion productions formed on the surface of substrate. The adhesiveness between the substrate and the coating layer is weaken by corrosion and the exfoliation initiated chiefly at the corrosion surface of the substrate. The AE events and energy of the corroded coating specimens decreased as the salt spray times increased.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2008.06a
• /
• pp.271-272
• /
• 2008

We fabricated a pentacene thin-film transistor with Ni/Ag source/drain electrodes. Also, we obtained similar electrical characteristics as compared with source/drain electrode with Au. This device was found to have a field-effect mobility of about 0.021 $cm^2$/Vs, a threshold voltage of -5, -7 V, an subthreshold slope of 2.0, 4.5 V/decade, and an on!off current ratio of $3.6\times10^5$, $2.0\times10^6$.

• Bulletin of the Korean Chemical Society
• /
• v.32 no.10
• /
• pp.3655-3659
• /
• 2011

The hydrogenolysis of polymer-bound arenesulfonates by 2-propylmagnesium chloride was performed through reductive cleavage of the C-S bond in the presence of a nickel catalyst. The reaction underwent in the highest efficiency by adding 15 equiv of the nucleophile in two additions with $dppfNiCl_2$ in THF. Various unfunctionalized naphthalene, biphenyl, and stilbene derivatives were produced in good yields by the traceless sulfonate linker system at room temperature.