• YAKHAK HOEJI
• /
• v.36 no.3
• /
• pp.199-204
• /
• 1992

The trace elements in animal feed were analyzed by Inductively Coupled Plasma Mass Spectrometer (ICP-MS, VG-PlasmaQuad Co.) to find possible sources of heavy metals accumulation in rat organ. The study about spectral interference was performed by analysis of a background spectrum of ICP-MS. Recovery test using standard of Cd and Se (100 ppb) was found to be better than 90%. Twenty elements (Ca, Fe, Mg, Ti, Cr, Ni, Cu, Zn, Ba, Al, Mn, Pb, B, Ce, Bi, U, V, Cd, and W)are determined.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2004.04b
• /
• pp.105-110
• /
• 2004

방사선 투시조영 촬영 시 사용되는 방호복의 차폐효율 증가와 경량화는 오랜 시간 연구 대상이 되었다. 이러한 방호복의 질적 향상을 위하여 연구한 결과는 다음과 같다. Apron의 규격인 납 당량 0.25mm에 해당하는 투과선량은 5.2%로 나타났으며, 시료 Sn, Ni, Ti, Cu의 방사선 차폐 효율은 Sn이 가장 높게 나타났다. 증착시료 Sn+Pb 방법에서는 Sn 0.18mm와 Pb 0.1mm, Pb+Sn 방법에서는 Pb 0.1mm와 Sn 0.36mm에서 Apron의 규격인 납 0.25mm 두께로 나타났다. 증착시료 Sn+Pb는 Apron의 규격인 0.25mm 납 당량보다 차폐효율이 높고, 면적당 무게가 가벼워 방호복 물질로 적합한 것으로 사료된다.

• Proceedings of the Korean Society for Technology of Plasticity Conference
• /
• 2004.10a
• /
• pp.199-202
• /
• 2004

In this present study, an attempt was made to determine the deformation mode of the Zr-Ti-Cu-Ni-Be bulk metallic glass by compression test over a wide range of temperatures and strain rates. From the results, empirical deformation map could be constructed including the boundaries of different deformation modes. Considering power dissipation map and instability map developed on the basis of the Dynamic Materials Model (DMM), the processing map for extrusion could also be constructed. In addition, the macroscopic formability of this BMG alloy has also been examined through the extrusion in laboratory scale within undercooled liquid state. From the results of macroscopic extrusion formability, both deformation map and processing map present good criteria to determine optimal forming conditions.

• Korean Journal of Plant Resources
• /
• v.3 no.2
• /
• pp.115-121
• /
• 1990

In view of the results to have measured metallic elements which is included in 40 sorts of herb medicines and surveyed their distribution, ninekinds of metals including Co, Ce, Ga, 71, Cd, As, Sbr Bu. Pb, are never orlittle included in almost herb medicines. Other twenty four sorts of ele-ments (Mo, Sc, Be, V, Ni, Su, Se, Ba, Cr, Su, Ti, B, Li, Mg, Ca, Sr, Mnl Fe,Cu, Zn. p, Al, Na, K) are metals that are included in large quentities incomparison with others. Selagirellae Radix contains is kinds of metallicelements more then other herb medicines does. The content of elements ofinorganic metal differs greatly according to the part of herb medicines .

• Korean Journal of Plant Resources
• /
• v.3 no.2
• /
• pp.107-114
• /
• 1990

In view of the results to have measured metallic elements which is included in 45 sorts of herb medicines and surveyed their distribution, 8 kinds ofmetals including Co, Ge, Ga, TL, Cd, As, 8i, Pb, are never or little includedin almost herb medicines . Other twenty-five sorts of elements (Mo, Sc, Be, V,Ni, Sn, Se, Ba, Cr, Sb, Si, Ti, B, Li, Mg, Ca, Cr, Mn, Fe, Cu, Zn, p, Al, Na,K) are more or Less included in all herb Bedicines ana Na, Ca, p and K aremetals that are included in Large quentities in comrarison with others . Patri-uiae Radix Contains 7 kinds of metal lic elements more than other herb medicinesdoes .

• Korean Journal of Plant Resources
• /
• v.4 no.2
• /
• pp.39-45
• /
• 1991

Proximate compositions of the roots of cultured and wild Codonopsis lanceolata were examined as tile basic reasearch for the study of their source of processed foods.No significant difference in the contents was found between the wild root and thecultivated at 3$0^{\circ}C$ in biotronroom. In view of the results to have measured mineralswhich is included in 14 sorts of Codonopsis lanceolata and surveyed their distribution.12 kinds of minerals including T1, Co, Ge, Sm, Mo, Sc, Be, Cd, As, Ga, Bi, ph are ne-vel or little included in almost source. Other twenty-one sorts of minerals (Ni, Se,Ba, Sb, Si, Ti, B, Li, Ifs, Ca, Sr, Mn, Fe, Cu, Zn, p, Al, Na, V, Cr, K) are more or less in-cluded in all source and Ca, Mg, p, K, and Fe are metals that are included in large qu-entities in comparison with others. No minerals difference in the contents was foundbetween the cultivated temperature. The content of elements of inorganic metal differsaccording to the part of C. lanceolata.

• Journal of Welding and Joining
• /
• v.18 no.6
• /
• pp.74-82
• /
• 2000

The fluxless wetting properties of UBM-coated Si-wafer to the binary lead-free solders(Sn-Ag, Sn-Sb, Sjn-In, Sn0Bi) were estimated by wetting balance method. With the new wettability indices from the wetting curves of one side coated specimen, the wetting property estimation of UBM-coated Si-wafer was possible. For UBM of Si-chip, Au/Cu/Cr UBm was better than au/Ni/TI in the point of wetting time/ At general reflow process temperature, the wettability of high melting point solders(Sn-Sb, Sn-Ag) was better than that of low melting point one(Sn-Bi, Sn-In). The contact angle of the one side coated Si-plate to the solder could be calculated from the force balance equation by measuring the static state force and the tilt angle.

• Proceedings of the Korean Nuclear Society Conference
• /
• 2005.05a
• /
• pp.309-310
• /
• 2005

Some minor elements(Al, B, Ba, Ca, Cd, Co, Cr, Cu, Gd, Mg, Mn, Mo, Nd, Ni, P, Pb, Si, Sn, Sr, Ti, V, Yb, Zn and Zr) in iron compounds such as the S/G sludge of a power plant were separated from iron by anionic and cationic exchange methods. If a ICP-AES or AAS determination follows this method, minor elements of more than 2 or 20 ppm of Fe can be determined with an error less than 20% except Sn and Mo. Alkaline elements were excluded from this study since they can be easily recovered from an anionic exchange. Application to real sludge samples is ongoing.

• Proceedings of the Korean Institute of Surface Engineering Conference
• /
• 2007.11a
• /
• pp.166-168
• /
• 2007

스퍼터링법으로 제작된 FCCL은 PI필름(Poly-imide film)과 Cu layer사이에 Tie-coating layer로 Ni-Cr을 많이 사용한다. 하지만 완성된 FCCL에서 페터닝을 실시할 때 Cr성분이 소멸되지 않고 잔존하는 현상으로 누설전류가 발생 한다. 또한 Cr으로 인해 Eatching액의 오염으로 재사용의 어려움도 발생된다. 이러한 원인들은 제품의 특성들을 저하 시키므로 이를 개선할 필요가 있다. 따라서 본 연구에서는 기존의 Tie-coating layer를 대체할 물질로 Acrylic acid를 이용하여 FCCL을 제작하여 표면특성 평가를 위해 Contact angle측정과 부착력을 위한 Peel test측정과 조직분석 및 성분분석을 위해 SEM-EDS를 측정을 통하여 Polymerization을 이용한 Ti-coating layer 개발의 가능성을 확인하였다.

• Proceedings of the KIEE Conference
• /
• 2007.07a
• /
• pp.1337-1338
• /
• 2007

In this study, in order to develop low temperature sintering ceramics for multilayer piezoelectric actuator, 0.07Pb$(Mn_{1/3}Nb_{2/3})O_{3}-xPb(Ni_{1/3}Nb_{2/3})O_{3}-(0.93-x)Pb(Zr,Ti)O_{3}$ ceramics system were fabricated using $Li_{2}CO_{3}-Bi_{2}O_{3}$-CuO sintering aids and the specimens were sintered at $930^{\circ}C$. Thereafter their piezoelectric and dielectric characteristics were investigated with the amount of PNN substitution. At 9[mol%] PNN substitution, electromechanical coupling factor (kp), mechanical quality factor (Qm) and piezoelectric constant ($d_{33}$) showed the optimum value of 0.60, 1323 and 387pC/N, respectively.