• 대한기계학회논문집B
• /
• 제27권10호
• /
• pp.1480-1488
• /
• 2003

Synthesis of carbon nanomaterials on a substrate coated with metal nitrates using an ethylene fueled inverse diffusion flame was illustrated. The effects of radial distance, residence time of the substrate, and hydrocarbon composition on the synthesis of carbon nanomaterials were investigated. The effects of catalyst metal particles were also studied using SUS304 substrates coated with Fe(NO$_3$)$_3$ (ferric nitrate, nonahydrate) and Ni(NO$_3$)$_2$(nickel nitrate, hexahydrate), and Cu substrate. Carbon nanomaterials, with diameters ranging from 30 - 70 nm, were observed on the substrate for both cases of using substrates only and using them with metal nitrates. In case of using the substrate with metal nitrates, the formation and growth of carbon nanomaterials were occurred in the lower temperature region than that of using the substrates only due to the easy activation of the metal particles coated on the surface of the substrates.

• 한국환경과학회지
• /
• 제10권3호
• /
• pp.209-216
• /
• 2001

Dustfall particles were collected by the modified American dust jar (wide inlet bottle type) at 6 sampling sites in Pusan area from March, 1999 to February, 2000. Thirteen chemical species (Al, Ca, Cd, Cr, Cu, Fe, K, Mg, Mn, Ni, Pb, Si, and Zn) were analyzed by AAS and ICP. The purposes of this study were to estimate qualitatively various bulk deposition flux of dustfall and insoluble components by applying regional and seasonal distribution. Dustfall amount of regional variations were found in order of coastal zone, industrial zone, commercial zone, agricultural zone and residential zone, and seasonal total dustfall had higher concentrations during spring for 6.741 ton/${km}^2$/season, lower concentrations during summer for 1.989 ton/${km}^2$/season, and annual total concentration was 17.742 ton/${km}^2$/year. The regional distributions of enrichment factor show well-defined anthropogenic metals (Cd, Cu, Pb, and Zn) at industrial and agricultural zone, and contribution rate of soil particles were found in order of summer, fall, winter and spring. Factor loading effects of chemical composition of dustfall were found in order of road traffic emission source and combustion processed source, industrial activity source, soil source and marine source.

• 한국환경과학회지
• /
• 제12권10호
• /
• pp.1043-1054
• /
• 2003

During the period from April to September 2002, the size distributions of ambient aerosol were measured at the coastal site at Hamduk in Jeju Island. Na$\^$+/, K$\^$+/, Mg$\^$2+/, Ca$\^$2+/and Cl$\^$-/ exhibited mostly a bimodal coarse mode size distribution, while ammonium and sulfate were mainly in the fine size range, with maximum at around 0.54$\mu\textrm{m}$. The average molar concentration ratio of ammonium to sulfate for fine particles was equal to 2.0${\pm}$0.9. Nitrate was evenly found in both the coarse and fine modes. Elements like Al, Fe, Cu, Mg, Na, Ti, Sr and Mn were dominant in coarse particles, with the maximum at around 5.25$\mu\textrm{m}$. S and Pb were mainly in the submicrometer size range. Other elements with a fine and coarse modes were V, Ni, Cu, Ba and Mo. The patterns of the size distributions of trace elements measured at the downtown in Jeju City were very similar to those at the coastal site in Hamduk. However, the amplitude of size fractional concentrations at Jeju City was narrower than that at Hamduk. While the mass median diameters for the chemical species originated from the natural origin such as marine and crust were relatively large, those for ammonium, sulfate, S and Pb were very small.

• 자원환경지질
• /
• 제30권5호
• /
• pp.443-450
• /
• 1997

The main purpose of this study is to investigate mineralogical and chemical changes during natural weathering, and assess the mobility of major and trace elements. Yongwol power plant utilize anthracite coal which is mainly composed of illite, kaolinite, pyrophyllite and quartz in mineralogy. Coal and coal-derived fly ash samples were sampled by the electrostatic precipitator in Yongwol coal-fired power plant in Korea. Short term weathered fly ash were also collected in ash disposal mound, and two profile soil samples were taken from an ash near the power plant. Amorphous materials are the main component of the fly ash, and mullite, quartz, magnetite and heamatite are present in all coal-derived fly ash. In chemistry, Si and Al are the most abundant elements of the total content. The ash samples were fractionated into upper $90{\mu}m$ and under $45{\mu}m$ size. Finer particles show higher concentrations in metal contents including Co, Cr, Cu, Ni, V, Zn and Pb. Concentration of Zn and Pb are nearly 4 times higher concentration in the finer particles. For the profile samples, the concentrations of $SiO_2$, $Na_2O$, MgO and $K_2O$ generally show increasing trends with depth, whereas those of $Fe_2O_3$ and $TiO_2$ appear to decrease with depth. Content of MnO does not show any specific depth trend. For the trace elements, Co, Cu, Ni and V show increasing concentrations with depth.

• 한국지하수토양환경학회지:지하수토양환경
• /
• 제9권4호
• /
• pp.52-61
• /
• 2004

음이온 비소와 양이온 아연 및 니켈로 오염된 토양을 산세척으로 복원하기 위해서 토양세척 파일럿 장비를 이용해서 토양의 물성과 산세척 특성 및 미세토양과 용존 오염물의 발생 특성을 고찰하였다. 비소와 아연 및 니켈의 pH $2{\sim}3$에서 산세척시 황산과 인산은 공존 경쟁 음이온의 존재로 비소의 제거 효율을 높였고, 염산은 비소, 니켈, 아연을 동시에 효율적으로 제거하였다. 세척조에서 화학적 용출은 임계체류시간 이상에서 세척 효율이 일정해졌고, 산에 의한 용출 가능한 존재형태는 교환성 및 산화물 결합과 유기성 결합형태, 그리고 부분적으로 잔류형태였다. 오염 토양의 입도에 따른 과립의 토양입자의 토양세척 효율은 높지만, 미세입자($<74{\mu}m$)는 오염물질의 농집 현상이 일어나서 제거효율이 감소했다. 또한, $<149{\mu}m$ 이하의 미세토양을 물리적 입도 분리시 전체 세척효율이 향상되었다. 따라서, 미세토양의 양이 최소가 되고 화학적 용출이 최대가 되는 세척 효율 교차지점에서 화학적 용출과 미세토양의 분리가 토양세척의 증가된 효율을 보여 주었다.

• 한국표면공학회지
• /
• 제37권5호
• /
• pp.296-300
• /
• 2004

The defects of partial denture frameworks are mainly shrinkage porosity, inclusions, micro-crack, particles from investment, and dendritic structure. In order to investigate a good casting condition of partial denture frameworks, the three casting alloys and casting methods were used and detected casting defects were analyzed by using electrochemical methods. Three casting alloys (63Co-27Cr-5.5Mo, 63Ni-16Cr, 63Co-30Cr-5Mo) were prepared for fabricating partial denture frameworks with various casting methods; centrifugal casting (Kerr, USA), high frequency induction casting (Jelenko Eagle, USA), vacuum pressure casting (Bego, Germany). The casting temperature was $1,380^{\circ}C$ (63Co-27Cr-5.5Mo and 63Ni-16Cr) and $1,420^{\circ}C$ (63Co-30Cr-5Mo). The casting morphologies were analyzed using FE-SEM and EDX. The corrosion test of the dendritic structure was performed through potentiodynamic method in 0.9% NaCl solutions at $36.5^{\circ}C$ and corrosion surface was observed using SEM. The defects of partial denture frameworks improved in the order of centrifugal casting, high frequency induction casting, and vacuum pressure casting method, especially, pore defects were found at part of clasp in the case of centrifugal casting method. The structure of casting showed dendritic structure for three casting alloys. In the 63Co-27Cr-5.5Mo and 63Co-30Cr-5Mo, $\alpha$-Co and $\varepsilon$-Co phases were identified at matrix and $${\gamma}$-Ni_2$Cr second phase were shown in 63Ni-16Cr. Also, the corrosion resistance of cast structure increased in the order of vacuum pressure casting, high frequency induction casting, and centrifugal casting method.

• 자원리싸이클링
• /
• 제12권6호
• /
• pp.13-18
• /
• 2003

Fe($NO_3$)$_3$ㆍ$9H_2$O, Zn($NO_3$)$_2$ㆍ$6H_2$O, Ni($NO_3$3)$_2$ㆍ $6H_2$O, Cu($NO_3$)$_2$ㆍ $3H_2$O와 같은 질산 금속염들을 $150^{\circ}C$로 24시간 동안 열분해하여 최초 NiCuZn ferrite 분체를 얻었으며, 이 분체 시료를 $500^{\circ}C$로 가소한 후 각각 볼밀 분쇄를 행하고 $700∼1000^{\circ}C$까지 각각 1시간씩 소결을 행하여 이에 대한 자기적 특성을 조사하였다. 일반 세라믹스 공정 보다 질산금속염들의 $ 200^{\circ}C$이하의 저 융점인 것을 이용하여 이들 출발 시료를 $150^{\circ}C$의 저온에서 액상의 화학결합이 가능하게 입자간의 거리를 분자적 거리로 좁힐 수 있었으며, 이로 인해 소결반응 점을 최소한 200∼ $300^{\circ}C$ 이상 낮출 수 있었다. 또한 이들의 초투자율은 50∼490, 포화자속밀도 및 보자력은 각각 2,400G와 0.3∼1.2 Oe정도로 보통의 ferrite 소결체의 특성과 유사하게 나타났다.

• 공업화학
• /
• 제9권2호
• /
• pp.243-248
• /
• 1998

본 연구에서는 아스코르빈산을 이용하여 다성분계(Pd, Ru, Rh, Nd, Cs, Sr, Fe, Ni, Zr, Mo)의 모의고준위폐액 내에 있는 Pd의 침전 분리와 침전물의 특성이 조사되었다. 아스코르빈산의 금속이온들에 대한 환원특성을 이용하여 다성분계 모의폐액 내에 함유된 Pd을 선택적으로 침전 분리할 수 있었으며, 질산농도 0.5 M에서는 0.04 M의 아스코르빈산을 첨가함으로써 99.5% 이상의 Pd을 침전 분리시킬 수 있었다. 아스코르빈산에 의한 Pd 이온의 환원 반응은 질산농도가 중요한 역할을 하며, 질산농도가 증가할수록 Pd의 침전율은 감소하였다. 용액의 질산농도가 높고 아스코르빈산의 첨가량이 적은 경우 생성된 Pd 침전물은 평형에 도달하면서 재용해 현상이 나타났다. 생성된 Pd 침전물은 모의용액의 성분계와 관계없이 Pd금속 결정으로 형성되었으며, $1.0{\mu}m$ 이하의 입자가 응집된 형태로 나타났다.

• 한국분말재료학회지
• /
• 제23권3호
• /
• pp.207-212
• /
• 2016

In this study, Fe-Cu-Ni-Mo-C low alloy steel powder is consolidated by spark plasma sintering (SPS) process. The internal structure and the surface fracture behavior are studied using field-emission scanning electron microscopy and optical microscopy techniques. The bulk samples are polished and etched in order to observe the internal structure. The sample sintered at $900^{\circ}C$ with holding time of 10 minutes achieves nearly full density of 98.9% while the density of the as-received conventionally sintered product is 90.3%. The fracture microstructures indicate that the sample prepared at $900^{\circ}C$ by the SPS process is hard to break out because of the presence of both grain boundaries and internal particle fractures. Moreover, the lamellar pearlite structure is also observed in this sample. The samples sintered at 1000 and $1100^{\circ}C$ exhibit a large number of tiny particles and pores due to the melting of Cu and aggregation of the alloy elements during the SPS process. The highest hardness value of 296.52 HV is observed for the sample sintered at $900^{\circ}C$ with holding time of 10 minutes.

• 소성∙가공
• /
• 제24권1호
• /
• pp.44-51
• /
• 2015

The current study seeks to examine the effects of V and C additions on the mechanical and low thermal expansion properties of a high strength invar base alloy. The base alloy (Fe-36%Ni-0.9%Co-2.75%Mo-0.7Cr-0.23Mn-0.17Si-0.3%C, wt.%) contains $Mo_2C$ carbides, which form as the main precipitate. In contrast, alloys with additions of 0.4%V+0.3%C (alloy A) or 0.4%V+0.45%C (alloy B) contain $Mo_2C$+[V, Mo]C carbides. The average thermal expansion coefficients of these high strength invar based alloys were measured in the range of $5.16{\sim}5.43{\mu}m/m{\cdot}^{\circ}C$ for temperatures of $15{\sim}230^{\circ}C$. Moreover, alloy B showed lower thermal expansion coefficient than the other alloys in this temperature range. For the mechanical properties, the [V, Mo]C improved hardness and strengths(Y.S. and T.S.) of the high strength invar base alloy. T.S.(tensile strength) and Y.S.(yield strength) of hot forged alloy B specimen were measured at 844.6MPa and 518.0MPa, respectively. The tensile fractography of alloy B exhibited a ductile transgranular fracture mode and voids were initiated between the [V, Mo]C particles and the matrix. Superior properties of high strength and low thermal expansion coefficient can be obtained by [V, Mo]C precipitation in alloy B with the addition of 0.4%V and 0.45%C.