• 한국초전도저온공학회:학술대회논문집
• /
• 한국초전도저온공학회 2003년도 학술대회 논문집
• /
• pp.98-100
• /
• 2003

PbTiO$_3$ films applicable to buffer layers for YBCO coated conductor have been successfully fabricated by sol-gel process. Crystallinity of grown films are heavily dependent on processing parameters such as annealing atmosphere and number of dipping. (100) oreinted PbTiO$_3$ films grown on (200) oriented Ni substrates exhibit uniform surface with small grain size(200~300nm).

• 한국초전도학회:학술대회논문집
• /
• 한국초전도학회 2005년도 High Temperature Superconductivity Vol.XV
• /
• pp.71-71
• /
• 2005

• 한국초전도저온공학회:학술대회논문집
• /
• 한국초전도저온공학회 2002년도 학술대회 논문집
• /
• pp.119-122
• /
• 2002

The NiO buffer layers for YBCO coated conductor were prepared on textured Ni substrates by MOCVD method and the degree of texturizing and the surface roughness were analyzed X-ray pole figure and AFM and SEM. Processing variables were oxygen partial pressure and substrate temperature. (200) textured NiO layer was formed at 450~$470^{\circ}C$ and oxygen partial pressure of 1.67 Torr. Out-of-plane($\omega$-scan) and in-plane($\Phi$-scan) texture were $10.34^{\circ}$ and $10.00^{\circ}$ respectively. The surface roughness estimated by atomic force microscopy was in the range of 3.1~4.6 nm.

• Progress in Superconductivity
• /
• 제11권2호
• /
• pp.100-105
• /
• 2010

Reel-to-reel deposition of $Y_2O_3$ has been performed on Ni-5%W metal substrates using the RF-sputtering method. The epitaxial orientation of $Y_2O_3$ buffer layers to the base bi-axially textured substrate was well identified using ${\theta}-2{\theta}$, out-of-plane ($\omega$), and in-plane ($\phi$) scans in X-ray diffraction analysis. The optimization of $Y_2O_3$ seed layers in reel-to-reel fashion were investigated varying the deposition temperature, sputtering power, and pressure for its significant roles for the following buffer stacks and superconducting layers. $Y_2O_3$ were all grown epitaxially on bi-axially textured metal substrates at 380 watts and 5 mTorr in the temperature range of $600-740^{\circ}C$ with higher $Y_2O_3$ (400) intensities at ${\sim}710^{\circ}C$. It was found that the $\Delta\omega$ values were $1-2^{\circ}$ lower but the $\Delta\phi$ values were above $1^{\circ}$ higher than that of Ni-W substrates. As the sputtering power increased from 340 to 380 watts, $\Delta\omega$ and $\Delta\phi$ values showed decreased tendency. Even in the small window of deposition pressure of 3-7 mTorr, the $Y_2O_3$ (400) intensities increased and $\Delta\omega$ and $\Delta\phi$ values were reduced as sputtering pressure increased.

• 한국초전도저온공학회:학술대회논문집
• /
• 한국초전도저온공학회 2002년도 학술대회 논문집
• /
• pp.339-339
• /
• 2002

In the RABiTS approach to coated conductor development, successful (both economic and technological) depends on the refinement and optimization of each of three important components: the metal tape substrate, the buffer layer(s), and the HTS layer. Here we will report on the ORNL approach and progress in each of these areas. - Most applications will require metal tapes with low magnetic hysteresis, mechanical strength, and excellent crystalline texture. Some of these requirements are competing. We report on progress in obtaining a good combination of these characteristics on metal alloys of Ni-Cr and Ni-W. - The deposition of appropriate buffer layers is a crucial step. Recently, base research has shown that the presence of a stable sulfur superstructure present on the metal surface is needed for the nucleation and epitaxial growth of vapor-deposited seed buffer layers such as YSZ, CeO$_2$ and SrTiO$_3$. We report on the details and control of this superstructure for nickel tapes, as well as recent results for Cu and Ni-13%Cr. - Processes for deposition of the HTS coating must economically provide large values of the figure-of-merit for conductors, current x length. At ORNL, we have devoted efforts to a precursor/post-annealing approach to YBCO coatings, for which the deposition and reaction steps are separate. We describe motivation for and progress toward developing this approach. - Finally, we address some issues for the implementation of coated conductors in real applications, including the need for texture control and electrical stabilization of the HTS coating.

• 한국자기학회:학술대회 개요집
• /
• 한국자기학회 2007년도 The 1st International Symposium on Advanced Magnetic Materials
• /
• pp.297.2-297.2
• /
• 2007

• 한국재료학회:학술대회논문집
• /
• 한국재료학회 1998년도 IUMRS-ICEM ABSTRACT BOOK
• /
• pp.128.2-128
• /
• 1998

• 한국자기학회지
• /
• 제19권6호
• /
• pp.197-202
• /
• 2009

코닝유리(Corning glass) 기판 위에 이온빔 증착법으로 제작한 버퍼(Ta)/코네틱(Conetic; NiFeCuMo) 박막에 대해 버퍼층에 의존하는 결정성장과 열처리 효과를 조사하였다. 또한 코네틱층을 증착할 때에 인가한 자기장 방향으로 용이축과 곤란축의 자기저항 곡선으로부터 얻은 보자력과 포화자기장값을 버퍼층 유무에 따라 서로 비교하였다. Ta 박막의 두께가 5 nm이고 코네틱 박막의 두께가 50 nm일 때에 보자력은 0.12 Oe으로 작았으며, MH 히스테리시스 곡선에서 얻은 자화율($\chi$)은 1.2 ${\times}\;10^4$으로 우수한 연자성의 특성을 가졌다. 저자기장에 민감한 거대자기저항 스핀밸브(GMR-SV; giant magneoresistance-spin valve)나 자기터널링접합(MTJ; megnetic tunnel junction) 박막구조에서 자유층으로 연자성의 특성이 우수한 코네틱 박막을 사용할 수 있는 가능성을 확인하였다.

• 한국초전도저온공학회:학술대회논문집
• /
• 한국초전도저온공학회 2003년도 추계학술대회 논문집
• /
• pp.120-122
• /
• 2003

BaZrO$_3$and SrTiO$_3$(STO) thin films were Pulsed laser deposited on biaxially textured Ni and Ni-W alloy substrates to be used as single buffer layer for coated conductor. The texture of the films were analysed using the GADDS (general area detector diffraction system). Both films deposited on the metal tape were strongly (001) oriented, and in-plane textured (Δø (BZO) =9$^{\circ}$, Δø (STO) = 10$^{\circ}$).

• 한국초전도ㆍ저온공학회논문지
• /
• 제8권3호
• /
• pp.32-36
• /
• 2006

Simplification of the buffer architecture in the fabrication of coated conductors is required because the deposition of multi-layers leads to a longer production time and a higher cost of coated conductors. In this study, a single layered buffer deposition of $CeO_2$ for low cost coated conductors has been tried using thermal evaporation technique. l00nm-thick $CeO_2$ layers deposited by thermal evaporation were found to act as a diffusion layer. $0.4{\mu}m$-thick SmBCO superconducting layers were deposited by thermal co-evaporation on the $CeO_2$ buffered Ni-W substrate. Critical current of $55.4 A/cm^2$ was obtained for the SmBCO coated conductors.