• 한국광학회지
• /
• 제13권4호
• /
• pp.314-318
• /
• 2002

저전압(~1 ㎸)에서 구동되어 수 ㎁의 전류를 얻을 수 있는 초소형 전자 칼럼(microcolumn) 설계를 위한 프로브(probe) 빔의 직경이 최소가 되는 전자 광학계의 조건을 조사하였다. 프로브 빔의 최소 직경은 전자 방출원의 특성에 의존하는데, 동일 조건의 광학계에 대하여 thermal field emitter(TFE)인 경우 ~20 ㎚인 반면 cold field emitter(CFE)인 경우 ~10 ㎚인 것으로 조사되었다.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2003년도 추계학술대회 논문집 전기물성,응용부문
• /
• pp.22-24
• /
• 2003

In this work, in order to investigate the effect of multiple lightning impulse currents on zinc oxide arrester blocks. We have been designed and fabricated a multi-impulse generator which can produce quintuple voltages with $1.2/50{\mu}s$ to 100kV and quintuple currents with $8/20{\mu}s$ to 12kA and we have evaluated the characteristics of zinc oxide arrester block using several electrical and physical methods after the multi-impulse test. It was found that the multi-impulse failures of ZnO arrester blocks were mainly caused by surface flashover and the multi-impulse currents test would be more suitable than single impulse current test in evaluation of the characteristics of zinc oxide arrester blocks corresponding to actual situations.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2003년도 하계학술대회 논문집 C
• /
• pp.1674-1676
• /
• 2003

The factors affecting the accuracy of lightning current measuring system are figured out the materials and length of down-conductor, and impedance matching between grounding resistance and characteristic impedance of cable. The cable with the low characteristic impedance used to transfer the lightning current from the top of the tower is too long to measure the waveform of lightning current, exactly. Especially, the height of the tower can cause the change of front time and magnitude of lightning stroke current. Basically, in this experiment. It was found that the magnitude and rise time of the lightning current are extremely dependant in the length of down-conductor in lightning current measuring system.

• 로봇학회논문지
• /
• 제2권2호
• /
• pp.191-195
• /
• 2007

Abstract MOCIE(Ministry of Commerce, Industry and Energy) handles 6 Projects for Intelligent Robot, whose budget is around 40 Million dollars per year. In this paper we have tried to analyze the state of robot technology of the projects. Each sub-projects has been divided according to the technological classification. Two major projects of Next Generation Growth Engine and 21C Frontier show different state each other. The former is focused on the product while the latter on the technology. Output of 21C Frontier should be linked to the Next Generation Growth Engine, otherwise, it will fail to advance. The project management handles only the quantitative performance such as business results, number of prototype, and number of patents and papers. Technological Capability is essential and it should be managed. This paper proposes efficient classification of robot technology and technology index.

• 한국우주과학회:학술대회논문집(한국우주과학회보)
• /
• 한국우주과학회 2004년도 한국우주과학회보 제13권2호
• /
• pp.223-226
• /
• 2004

This paper presents a feasibility study of an advanced IO board design for the next generation of low-earth orbit satellites. Advanced IO board design includes sensor interface, NO, D/A, Digital Module, Serial Module etc, and allows to process increasing data rates between IO board and CPU board. The higher data rate involved in modem IO board additionally introduce issues such as noise, fault tolerance, command and data handling, limited pin count and power consumption problems. The experience in KOMPSAT-l and 2 program with this kind of problems resulted in using SMCS chip set, a high speed serial link technology based on IEEE-1355 (Space Wire Protocol) (ESA-ESTEC 2003, Parkes 1999), as a standard for next generation of satellite IO board design.

• 한국자기학회지
• /
• 제17권4호
• /
• pp.178-181
• /
• 2007

반도체의 고 집적회로를 형성하기 위하여 주로 이용하고 있는 광 리소그래피 기술을 대신하여 사용할 수 있는 차세대 리소그래피 기술로 전자빔 리소그래피 기술에 대한 연구가 진행되고 있다. 본 연구에서는 초소형 전자칼럼을 이용하여 전자빔 에너지와 조사농도에 따른 pattern 두께의 의존성을 조사하였으며 두께가 100nm인 $SiO_2$ 박막의 patterning을 통하여 $SiO_2$ 박막에 대한 저 에너지 전자빔 리소그래피 공정의 가능성을 입증하였다.

• KSII Transactions on Internet and Information Systems (TIIS)
• /
• 제13권6호
• /
• pp.2964-2985
• /
• 2019

Global data center IP traffic is expected to reach 20.6 zettabytes (ZB) by the end of 2021. Intra-data center networks (Intra-DCN) will account for 71.5% of the data center traffic flow and will be the largest portion of the traffic. The understanding of traffic distribution in IntraDCN is still sketchy. It causes significant amount of bandwidth to go unutilized, and creates avoidable choke points. Conventional transport protocols such as Optical Packet Switching (OPS) and Optical Burst Switching (OBS) allow a one-sided view of the traffic flow in the network. This therefore causes disjointed and uncoordinated decision-making at each node. For effective resource planning, there is the need to consider joining the distributed with centralized management which anticipates the system's needs and regulates the entire network. Methods derived from Kalman filters have proved effective in planning road networks. Considering the network available bandwidth as data transport highways, we propose an intelligent enhanced SDN concept applied to OBS architecture. A management plane (MP) is added to conventional control (CP) and data planes (DP). The MP assembles the traffic spatio-temporal parameters from ingress nodes, uses Kalman filtering prediction-based algorithm to estimate traffic demand. Prior to packets arrival at edges nodes, it regularly forwards updates of resources allocation to CPs. Simulations were done on a hybrid scheme (1+1) and on the centralized OBS. The results demonstrated that the proposition decreases the packet loss ratio. It also improves network latency and throughput-up to 84 and 51%, respectively, versus the traditional scheme.

• Journal of Communications and Networks
• /
• 제8권4호
• /
• pp.475-479
• /
• 2006

In Korea, we witness vivid evidences of changing trend in communication that insist the emergence of new networking architecture. To accommodate the changing trend and to hold current strong position in global IT industry, Korea have launched broadband convergence network (BcN) initiative. BcN vision for Korea is to be the first in the world to realize converged network infrastructure and ubiquitous service environment. In this paper, we have introduced the concept and the vision of BcN with a viewpoint of a new paradigm to prepare future-proof communication environment. And then, we have disclosed BcN research and development (R&D) activities including R&D philosophy, R&D phases, and key technologies required. Also, we have discussed current development issues in three technology branches including service and control technology, unified transport technology, and next-generation access technology.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2002년도 추계학술대회 논문집 전력기술부문
• /
• pp.59-61
• /
• 2002

This paper describes how travelling waves measured at an end of a transmission line can be used for fault location. In this paper a FIR filter which makes' high frequency components much more prominent is proposed. Consequently. the algorithm can distinguishes correlation peaks. A series of simulation studies using EMTP verified that the proposed algorithm can calculate an accurate fault distance in spite of effects of various errors.

• 전자공학회지
• /
• 제29권9호
• /
• pp.18-30
• /
• 2002

Wireless communication systems will be one of the biggest drivers of semiconductor products over the next decade. Global Positioning System (GPS) and Blue-tooth, HomeRF, and Wireless-LNA system are just a few of RF-module candidate awaiting integration into next generation mobile phone. Motivated by the generation mobile phone. Motivated by the growing needs for low-cost and multi-band/multi-function single chip wireless transceivers, CMOS technology has been recognized as a most promising candidate for the implementation of the future wireless communication systems. This paper presents recent developments in RF CMOS technology, which is classified into device technology and circuit technology and from them forecasts technology and from them forecasts technology trends in the near future.