• 디자인학연구
• /
• 제18권4호
• /
• pp.65-72
• /
• 2005

여객선(passenger ships)은 항로와 운쏭 목적에 따라 서로 다른 마켓(markets)을 가지고 있다. 승객파 선주의 다양한 요구와 시장 경쟁에서 우위를 선점하기 위해 선박 규모와 종류(categories) 따라 독자적인 디자인 스타일을 나타내며 서로 다른 디자인 해결책과 변화를 보이고 있다. 특히 여객선의 외관디자인 스타일은 인테리어 디자인과 함께 선사의 고유한 아이덴티티를 구축하고 있으며, 이를 통해 선사의 차별화 되는 디자인과 품질보증에 주력하고 있다. 여객선 외관 입면은 크게 하부(선각, hull)와 상부(superstructure) 그리고 선수 선미부의 디자인으로 구분될 수 있으며, 각창 환창, 발코니, 퍼널(funnel), 선수 선미부, 노출갑판 그리고 글라스 파사드(glass passed)등은 갑판과 주 수직구획에 의한 공간의 구성 요소에 따라 외관 입면의 구획과 형태가 구별되어 진다. 선박 최상부의 퍼널은 선사만의 독특한 아이콘의 역할로 외관형태와 브랜드 이미지가 잘 결합되어진 총체적인 브랜드 아이덴티티를 보여주며 기능과 형태 그리고 측면에서의 디자인 밸런스 역할을 나타낸다. 해상과 선박기능으로 인한 단조로움과 폐쇄성에 대항하여 외부(바다)로의 개방성, 확장성을 가지며 새로운 개념의 외관스타일로 발전하여야 할 것이다. 이러한 외관 스타일은 기능과 공간계획과 연관되어 새로운 디자인(피부와 접하는 오픈형 공간, 전면글라스 파사드 등)과 구조형태(초대형 상부구조, 플랫폼, 유선형 선박외형, 여객과 화물의 이동 적재성 기능을 갖춘 해양 건축 구조물 등)로 발전될 수 있을 것이다.

• 한국수소및신에너지학회논문집
• /
• 제33권5호
• /
• pp.541-549
• /
• 2022

This study investigates anti-icing design by conjugate heat transfer analysis in lab-scale printed circuit heat exchanger (PCHE) for supply of cryogenic high pressure liquid hydrogen. The conjugate heat transfer analysis by using computational dynamics (CFD) provided various temperature distributions at important locations in PCHE heat exchanger and predicted the possibility of freezing in hot channel. And, the effect of inlet temperature of glycol water was analyzed in order to resolve the freezing problem in PCHE.

• 한국신재생에너지학회:학술대회논문집
• /
• 한국신재생에너지학회 2010년도 추계학술대회 초록집
• /
• pp.171-171
• /
• 2010

An innovative design of a floating-buoy wave energy converter (WEC) using hydrostatic transmission (HST), named HSTWEC, is presented in this paper. The system is designed to convert ocean wave fluctuation into electricity by using the HST circuit and an electric generator. Based on the floating-buoy concept, the wave forces the sub-buoy to move up and down. Consequently, the electric power can be obtained from the generator in both the moving directions of the sub-buoy through the HST circuit as shown in Fig. 1. In order to investigate the HSTWEC operations, a mathematical model of the system is indispensible. In addition, the method to control the HSTWEC, including: pump displacement control, tension adjustment control and ballast weight control, is also discussed in this paper. Finally, the design concept as well as simulation results indicated that this HSTWEC design is an effective solution and possible to fabricate for wave energy generation.

• Earthquakes and Structures
• /
• 제9권6호
• /
• pp.1337-1353
• /
• 2015

Seismic upgrading of existing structures is a technical and social issue aimed at risk reduction. Sustainable design is one of the most important challenges in any structural project. Nowadays, many retrofit strategies are feasible and several traditional and innovative options are available to engineers. Basically, the design strategy can lead to increase structural ductility, strength, or both of them, but also stiffness regulation and supplemental damping are possible strategies to reduce seismic vulnerability. Each design solution has different technical and economical performances. In this paper, four different design solutions are presented for the retrofit of an existing RC frame with poor concrete quality and inadequate reinforcement detailing. The considered solutions are based on FRP wrapping of the existing structural elements or alternatively on new RC shear walls introduction. This paper shows the comparison among the considered design strategies in order to select the suitable solution, which reaches the compromise between the obtained safety level and costs during the life-cycle of the building. Each solution is worked out by considering three different levels of seismic demand. The structural capacity of the considered retrofit solutions is assessed with nonlinear static analysis and the seismic performance is evaluated with the capacity spectrum method.

• 한국의류산업학회지
• /
• 제19권3호
• /
• pp.259-266
• /
• 2017

In a contemporary fashion along with the advance of high technology, development of a new material is being increasingly emphasized and the need of creative convergence using a computer is being expanded. As a global designer who appeared through association between Japan and the West, Issey Miyake has been continually pursuing a new challenge and a solution using high technology, leading the globalization of Japanese fashion. This research aims at examining design characteristics of Issey Miyake collection's A-POC showing a new paradigm, that is, an innovative clothing manufacture system to input information on materials, colors and shapes into a textile machine based on the computer program and manufacture a cylindrical fabric for completion of seamless clothing without sewing or cutting. A-POC is evolving continually through the development of new materials including recycled fibers and organics together with diversification of processing technology. Besides, it shows design characteristics including an integrated manufacturing method, autonomy for customers' selection, practicality for comfortable wearing by the majority, environment friendly idea to reduce waste of fabrics and materials and a new presentation through convergence of exhibition concepts of modern art. This research on Issey Miyake's A-POC characteristics is expected to present a role of fashion designers in a new design idea and paradigm of contemporary clothing using high technology.

• Smart Structures and Systems
• /
• 제25권1호
• /
• pp.105-109
• /
• 2020

The authors address the problem of ameliorating or updating existing educational buildings. This building typology is quite sensitive to social and media pressure, mainly when accidents have occurred nearby. When a building is classified as unsatisfactory, the current code requirements oblige one to re-design the building with significant penalty factors in the resistance values. Often the only solution is to destroy the existing facility and to build a new one. When attempting to preserve the existing building, higher levels of safety are demanded by the society and this can only be achieved by innovative system architectures. The authors propose and discuss a prototype that can be easily adopted to retrofit small educational buildings as the ones common in small municipalities. The higher performance is pursued by a special design of the control scheme, with new control devices and special control laws.

• Steel and Composite Structures
• /
• 제34권3호
• /
• pp.441-452
• /
• 2020

Within the French CIFRE research project COMINO, an innovative type of composite beam was developed for buildings that need fire resistance with no additional supports in construction stage. The developed solution is composed of a steel U-shaped beam acting as a formwork in construction stage for a reinforced concrete part that provides the fire resistance. In the exploitation stage, the steel and the reinforced concrete are acting together as a composite beam. This paper presents the investigation made on the load bearing capacity of this new developed steel-concrete composite section. A full-scale test has been carried out at the Laboratory of Structural Engineering of the University of Luxembourg. The paper presents the configuration of the specimen, the fabrication process and the obtained test results. The beam behaved compositely and exhibited high ductility and bending resistance. The shear connection in the tension zone was effective. The beam failed by a separation between the slab and the beam at high deformations, excessive shear forces conducted to a failure of the stirrups in this zone. The test results are then compared with good agreement to analytical methods of design based on EN 1994 and design guidelines are given.

• Ocean Systems Engineering
• /
• 제3권3호
• /
• pp.219-236
• /
• 2013

The accurate prediction of motion in waves of a marine vehicle is essential to assess the maximum sea state vs. operational requirements. This is particularly true for small crafts, such as Autonomous Surface Vessels (ASV). Two different numerical methods to predict motions of a SWATH-ASV are considered: an inviscid strip theory initially developed at MIT for catamarans and then adapted for SWATHs and new a hybrid strip theory, based on the numerical solution of the radiation forces by an unsteady viscous, non-linear free surface flow solver. Motion predictions obtained by the viscous flow method are critically discussed against those obtained by potential flow strip theory. Effects of viscosity are analyzed by comparison of sectional added mass and damping calculated at different frequencies and for different sections, RAOs and motions response in irregular waves at zero speed. Some relevant conclusions can be drawn from this study: influence of viscosity is definitely non negligible for SWATH vessels like the one presented: amplitude of the pitch and heave motions predicted at the resonance frequency differ of 20% respectively and 50%; in this respect, the hybrid method with fully non-linear, viscous free surface calculation of the radiation forces turns out to be a very valuable tool to improve the accuracy of traditional strip theories, without the burden of long computational times requested by fully viscous time domain three dimensional simulations.

• International Journal of Contents
• /
• 제14권4호
• /
• pp.39-50
• /
• 2018

This paper analyzes the existing transportation systems of Nigeria and Korea and proposes a new railway and roadway design for Nigerian cities. The research findings and feasibility study revealed that the state of Nigeria's transportation system was critical as was its market segment, infrastructural deficit and financial requirement needed to implement a smart transportation system. The dilapidation of the existing infrastructure coupled with poor maintenance culture and limited public transport services has hindered the economic growth of Nigeria and its cities. A case study of Korea and Japan shows some possible solutions to Nigeria transportation challenges. Analytical and descriptive methods were used to critically assess the infrastructural challenges, movement, and convenience. The study proposed the design of a new intercity railroad and roadway across Abuja, Enugu, Lagos and Port Harcourt cities. The proposed designs have been established to be an innovative solution with advanced benefits over the current system. The implementation of the proposed designs is estimated to cost about US$(77,832,027,719) across the study areas. Thus, the discussion, conclusion, and recommendations given present a proposal to the Nigerian government on the possibility of solving the Nigerian intercity railroad and roadway transportation challenges across Abuja, Enugu, Lagos and Port Harcourt cities through smart designs.

• 한국콘텐츠학회논문지
• /
• 제17권10호
• /
• pp.161-170
• /
• 2017

한국 정부는 매장지의 부족으로 인해 추모공원의 경우 제한된 시간동안 매장을 하고 기한이 끝나면 유골을 화장하여 처리하는 방법을 택하고 있다. 본 연구에서 제안하는 새로운 묘지 디자인은 한국의 도시권에서 한정된 매장지에 대한 체계적이고 효과적인 해결방안이 될 수 있다. 목적에 맞는 묘지 디자인 개발을 위해 게로[1] 의 FBS 모델을 이용하였다. 이 모델은 기능, 행위, 구조를 중심으로 동적인 성격의 맥락을 포함하고 있다. 이 연구는 단순한 묘지의 공학적 건설에 관심을 두기보다는 환경친화적 묘지라는 새로운 묘지 개념을 발전시키고자 한다. 즉, 종래의 단순한 묘지 기능에서 자연공원의 기능을 부가하기 위한 디자인 모형을 제시하며 이를 통해 지속 가능한 묘지 건설을 위한 새로운 비지니스 모델을 제시하고자 한다.