• Journal of the Korean Institute of Illuminating and Electrical Installation Engineers
• /
• v.26 no.7
• /
• pp.16-22
• /
• 2012

With the increase of consumption of new renewable energy, the use of Electric Double Layer Capacitor(EDLC) is being gradually widened as the next generation energy storage device. In order to expand the market of EDLC which is recently receiving a lot of attraction as a new promising area, development of a charge/discharge cycle tester to measure and test performance, is essential. Therefore, this research designed a circuit to measure capacity and internal resistance and a circuit to measure voltage maintenance properties, based on EDLC's basic charging/discharging properties so it is able to measure the state of charge and discharge at high speed. When evaluating performance characteristics, the 5[V]/100[A] prototype-EDLC charge/discharge testing system developed for this research showed ${\pm}0.1$[%] of accuracy of voltage and current measurement. It was also proved that the developed charge/discharge testing system for EDLC can be applied to the actual industry, when testing the entire system using a program produced for data monitoring and acquisition.

• Journal of Hydrogen and New Energy
• /
• v.27 no.6
• /
• pp.773-782
• /
• 2016

The performance of the CT-TDLAS (computed tomography-tunable diode laser absorption spectroscopy) is strongly dependent upon the line broadening functions. The line of the laser beam used in the TDLAS is scattered by the natural broadening, the collisional broadening and the doppler broadening. The influence of the natural broadening to the experimental spectra obtained in the TDLAS is negligible. The influences of the collisional broadening and the doppler broadening to the experimental spectra are relatively large, in high pressure gas flows and in high temperature low pressure gas flows, respectively. In this study, optimal coefficients are proposed for the doppler broadening function by using the experimental data obtained in a flat burner test. The optimal coefficients were ${\gamma}_j=0.16$ and n=0.37. Using these coefficients, the temperature and concentration distributions at the engine exhaust gas pipe have been calculated showing their validities.

• Journal of Hydrogen and New Energy
• /
• v.33 no.5
• /
• pp.499-506
• /
• 2022

This study proposes kinetic parameters of Ru catalyst for steam methane reforming (SMR). First, extensive experiments are performed under different SMR conditions to evaluate performance of the catalyst in SMR. Second, a kinetic model is designed and developed for parameter estimation and validation using gPROMS. Finally, estimated parameters are fitted to the kinetic model and then, the model results are compared with the experimental data. The model results are in a good agreement with the experimental data.

• Journal of Hydrogen and New Energy
• /
• v.33 no.6
• /
• pp.827-837
• /
• 2022

If the hydrogen industry is activated, the introduction of C-type and pressurized liquefied hydrogen (LH2) tank suitable for small and medium-sized transp- ortation and storage will be given priority in the future. Therefore in this paper, the behavior for the LH2 property changes and boil-off gas (BOG) treatment of the C-type cargo tank through voyage of the LH2 carrier and pressurized tank of the LH2 receiving terminal were analyzed through computational simulations by making assumptions about the carrier operation and unloading conditions.

• International conference on construction engineering and project management
• /
• 2013.01a
• /
• pp.28-35
• /
• 2013

The construction industry has introduced the Leadership in Energy and Environmental Design (LEED) rating system to promote objective evaluations of the sustainability of buildings. Three important values to consider when implementing sustainability are the associated environmental, social, and economic impacts. Recently, researchers have begun to investigate the real estate value of LEED certified buildings in terms of the rental cost, occupancy rate, cost per unit area, and resale value in order to better understand the economic benefits of the LEED rating system. However, the economic benefits also encompass economic effects such as the impact of LEED certified buildings on neighborhood real estate values surrounding the certified buildings. This research examines whether the enhanced real estate value of LEED certified buildings in New York City extends to surrounding commercial buildings, utilizing spatial analysis via a Geographic Information System (GIS) and the hedonic pricing method to derive meaningful economic relationships. The results provide practical insights into the economic effect of LEED certified buildings that will be of interest to city officials and planners, as well as the owners, developers, investors and other stakeholders of surrounding buildings.

• Nuclear Engineering and Technology
• /
• v.56 no.4
• /
• pp.1284-1295
• /
• 2024

Due to increasing operational security demands, digital and intelligent condition monitoring of nuclear power plants is becoming more significant. However, establishing an accurate and effective anomaly detection model is still challenging. This is mainly because of data characteristics of nuclear power data, including the lack of clear class labels combined with frequent interference from outliers and anomalies. In this paper, we introduce a Transformer-based unsupervised model for anomaly detection of nuclear power data, a modified loss function based on the maximum correntropy criterion (MCC) is applied in the model training to improve the robustness. Experimental results on simulation datasets demonstrate that the proposed Trans-MCC model achieves equivalent or superior detection performance to the baseline models, and the use of the MCC loss function is proven can obviously alleviate the negative effect of outliers and anomalies in the training procedure, the F1 score is improved by up to 0.31 compared to Trans-MSE on a specific dataset. Further studies on genuine nuclear power data have verified the model's capability to detect anomalies at an earlier stage, which is significant to condition monitoring.

• 한국신재생에너지학회:학술대회논문집
• /
• 2005.06a
• /
• pp.127-131
• /
• 2005

The paper addresses modeling and analysis of a grid-connected photovoltaic generation system (PV system). PSCAD/EMIDC. an industry standard simulation tool for studying the transient behavior of electric power system and apparatus. is used to conduct all aspects of model implementation and to carry out extensive simulation study. An equivalent circuit model of a solar cell has been used for modeling solar array. A PWM voltage source inverter (VSI) and its current control scheme have been implemented. A maximum power point tracking (MPPT) technique is employed for drawing the maximum available energy from the PV array. Comprehensive simulation results are presented to examine PV array behaviors and PV system control performance in response to irradiation changes. In addition, dynamic responses of PV array and system to network fault conditions are simulated and analysed

• Journal of Electrical Engineering and Technology
• /
• v.3 no.1
• /
• pp.14-19
• /
• 2008

The paper presents an intelligent time series model to predict uncertain electricity market price in the deregulated industry environment. Since the price of electricity in a deregulated market is very volatile, it is difficult to estimate an accurate market price using historically observed data. The parameter of an intelligent time series model is obtained based on the simultaneous perturbation stochastic approximation (SPSA). The SPSA is flexible to use in high dimensional systems. Since prediction models have their modeling error, an error compensator is developed as compensation. The SPSA based intelligent model is applied to predict the electricity market price in the Pennsylvania-New Jersey-Maryland (PJM) electricity market.

• Journal of the Korean Institute of Illuminating and Electrical Installation Engineers
• /
• v.28 no.10
• /
• pp.43-48
• /
• 2014

With the energy paradigm shift from supply side management to demand side management, many researches have been done on demand side resource management and demand response. At the same time, Obix, BacNet-WS and OPC-UA are popularly used in buildings and industry energy management system. However, it is not easy to interchange the data and information among the systems cause a variety of protocols are used in buildings and factories. Therefore, in this paper, we are proposing an open business platform not only to integrate and manage the demand resources using various protocols and standards, but also to allow to plug-ins a new business service on top of the platform.

• 유체기계공업학회:학술대회논문집
• /
• 2006.08a
• /
• pp.265-268
• /
• 2006

In this paper, the research background and objectives of the wind mapping project of the Korean Peninsula, which has been carrying out as a part of "Investigation of new-renewable energy resources and establishment of comprehensive management system" funded by Korea Ministry of Commerce, Industry and Energy, are introduced together with the intermediate result of the project so far. The Korean wind map is to be established by numerical wind simulation based on terrain model ME-DEM and land-use model ME-LUM with the spatial resolution of 10km.