• 조명전기설비학회논문지
• /
• 제22권6호
• /
• pp.7-13
• /
• 2008

본 논문은 수치 해석을 이용한 교류형 플라즈마 표시기의 발광 효율 개선에 대한 연구를 주 내용으로 하고 있으며, 긴 전극 간격을 가지는 유지 전극들 사이에 2개의 보조 전극을 삽입한 5전극 신 구조에서의 방전 특성에 대해 분석하였다. 2차원의 수치 해석 결과에 의하면 어드레스 전극에 보조 펄스가 인가되는 구동 파형을 적용했을 때, 신 구조는 일반적인 3전극 면방전 구조에 비해 대략 52[%]의 효율 증가를 보였다. 결과적으로 방전 초기에 보조 전극 사이에서 일어나는 방전의 크기는 축소되고 주방전에 해당하는 유지 전극 사이의 긴 간격에서의 방전은 확장될수록 플라즈마 표시기의 유지 방전에 있어서 VU V생성 효율의 개선 효과는 커진다고 볼 수 있다. 이와 같은 수치 해석 결과에 대한 신뢰성은 실험 결과를 제시함으로써 검증할 수 있다.

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 2004년도 추계학술대회 논문집
• /
• pp.447-449
• /
• 2004

The purpose of this study is measured surface acoustic wave(SAW) characteristics to confirm utilization possibility as SAW sensor using new Pb(Mg$_{1}$3/Nb$_{2}$3/) $O_3$-PbTiO$_3$ (PMN-PT) piezoelectric substrate. We have tried to see if the material can be practically available as a new surface acoustic wave (SAW) biosensor to detect protein. The experimental results clarified that the frequency filtering of the central frequency of the PMN-PT substrate is a superior result to that of the LiTaO$_3$ (LT) substrate, but the result was not completely satisfactory. We know there is a problem in the design of inter-digital transducer (IDT) pattern. The waves transferred through the input terminal forms SAW which is sure to be transferred to the direction of the output terminal and the backward direction of the input terminal. This reflected wave is reiterated with SAW, which is transferred to the output direction, and so the frequency filtering gives a not good result. The electromechanical coupling coefficient of the PMN-PT substrate is excellent, and we can use it as a SAW sensor, in the near future, provided that there will be a new IDT design to increase the frequency filtering.

• Journal of Advanced Marine Engineering and Technology
• /
• 제33권4호
• /
• pp.509-516
• /
• 2009

This paper is the study on improving the coefficient of utilization of material in deep drawing process. Cylindrical cup drawing process is widely used in sheet metal forming process. The blank shape is one of the important things in sheet metal forming process. It is produced for the bridge of blank in a blanking process. The coefficient of utilization of material is much effected by this bridge of blank. This study offered a new process method to reduce the loss of material. The new blank shape offered and manufactured by new process method is investigated by a finite element method and the experiment. Then the wrinkling, the punch load, the thickness distribution is observed. This result is different from the result of circular blank process. And it is got that the Max strain, the wrinkle and the height of the wrinkle are effected by the holding force and the punch load. As a result, if the processing optimum condition is found, the loss of material will be reduced. It is necessary to research systematically about determining the optimum value of process variables.

• 한국정밀공학회지
• /
• 제19권4호
• /
• pp.179-186
• /
• 2002

This paper is the study on improving the coefficient of utilization of material in deep drawing process. Cylindrical cup drawing process is widely used in sheet metal forming process. The blank shape is one of the important things in sheet metal forming process. It is produced for the bridge of blank in a blanking process. The coefficient of utilization of material is much effected by this bridge of blank. This study offered a new process method to reduce the loss of material. The new blank shape offered and manufactured by new process method is investigated by a finite element method and the experiment. Then the wrinkling, the punch load, the thickness distribution is observed. This result is different from the result of circular blank process. And it is got that the Max strain, the wrinkle and the height of the wrinkle are effected by the holding farce and the punch load. As a result. if the processing optimum condition is found, the loss of material will be reduced. It is necessary to research systematically about determining the optimum vague of process variables.

• 한국수소및신에너지학회논문집
• /
• 제28권5호
• /
• pp.512-520
• /
• 2017

This paper is a numerical study of various methods of applying SOFC hot BOP insulation. The application methods are four cases from case 1 to case 4, and the performance difference between the result of applying powdered insulation and the result of zoning using composite multi-layer insulation was examined. Numerical results show that the thermal stability of composite multi-layer insulation is better than that of powder insulation when the thermal conductivity is 0.04 W/mK. In the future, we will increase the thermal conductivity of the composite multi-layer thermal insulation material and find the greatest value of thermal conductivity with a similar result to that of the powder insulation.

• 대기
• /
• 제16권1호
• /
• pp.49-53
• /
• 2006

The present study has examined interdecadal variations of the diurnal temperature range (DTR, daily maximum temperature minus daily minimum temperature) during the New Year season in Seoul for the period 1954-2005. Here, the average DTR for the New Year holidays (three consecutive days; one day before the New Year, the New Year day, and one day after the New Year) minus the average DTR for 14 days, 7 days before and 7 days after the New Year holidays, is defined for representing the New Year effect. The DTR index does not show notable trend until the late 1970s but shows obvious positive values afterward. For example, the difference of the average DTR between two periods (1980-2005 minus 1954-1979) is $0.65^{\circ}C$, which is meaningful at the 95% confidence level. This result demonstrates that intense human activity even for the limited period may provide climate impact in local regions. Its plausible causes are discussed.

• 한국정보기술응용학회:학술대회논문집
• /
• 한국정보기술응용학회 2005년도 6th 2005 International Conference on Computers, Communications and System
• /
• pp.99-102
• /
• 2005

In the paper, a proposed VCO based on bondwire inductances and nMOS varactors was implemented in a standard $0.25\;{\mu}m$ CMOS process. Using the new drain current model and a propagation delay time model equations, the operation speed of CMOS gate will predict the dependence on the load capacitance and the depth of oxide, threshold voltage, the supply voltage, the channel length. This paper describes the result of simulation which calculated a gate propagation delay time by using new drain current model and a propagation delay time model. At the result, When the reverse bias voltage on the substrate changes from 0 voltage to 3 voltage, the propagation delay time is appeared the delay from 0.8 nsec to 1 nsec. When the reverse voltage is biased on the substrate, for reducing the speed delay time, a supply voltage has to reduce. The $g_m$ value of MOSFET is calculated by using new drain current model.

• 복식
• /
• 제51권8호
• /
• pp.43-49
• /
• 2001

Galliano's works showed at Dior Collection in 1997 which was held for the 50th anniversary of New Look got a good evaluation in the sense of expressing the modern taste as well as reflecting the spirit of Dior. The purpose of this study is focused on observing how to adapt the Dior's spirit. to Galliano's own design and what is the factor to let us feel his works modern. Galliano's fifty works in that Collection are analyzed by content analysis. The result is as followed : Galliano created his fabulous and modern works by four ways such as using various ethnic details, new way of fabric usage, new construction. and differentiated color harmony from Dior's. This result also includes the methodological model to adapt to design process.

• 한국의류산업학회지
• /
• 제11권3호
• /
• pp.488-495
• /
• 2009

The purpose of this study is to experiment and develop seamless-effect knitwear design using tubular-jacquard structure in order to find a new method of manufacturing knitwear and to suggest a new design. The study is based on changing the point of view about using the practical technique like the tubular jacquard which has been used mainly for expressing patterns. The result of experimenting this, a piece of fabric is able to being worn as a piece of garment. As for using circular structure of tubular jacquard, a body can be fitted into the big space between front and back part of fabric and seams can be made of small patterns of jacquard fabric. The silhouette, the drape and the result of the garment of this experiment are different from the ordinary outfit. Therefore, the study to find a new way of design and manufacturing should go on to suggest a different form and method.

• 한국멀티미디어학회논문지
• /
• 제17권12호
• /
• pp.1418-1429
• /
• 2014

In this paper we suggest a new two-wheelers detection algorithm using local cell features. The first, we propose new feature vector matrix extraction algorithm using the correlation two cells based on local cell histogram and shifting from the result of histogram of oriented gradients(HOG). The second, we applied new weighting values which are calculated by the modified histogram intersection showing the similarity of two cells. This paper applied the Adaboost algorithm to make a strong classification from weak classification. In this experiment, we can get the result that the detection rate of the proposed method is higher than that of the traditional method.