• 한국신재생에너지학회:학술대회논문집
• /
• 2007.11a
• /
• pp.417-423
• /
• 2007

Oxy-gasification or oxygen-blown gasification, enables a clean and efficient use of coal and opens a promising way to CO2 capture. The coal gasification process of a slurry feed type, entrained-flow coal gasifier was numerically predicted in this paper. The purposes of this study are to develop an evaluation technique for design and performance optimization of coal gasifiers using a numerical simulation technique, and to confirm the validity of the model. By dividing the complicated coal gasification process into several simplified stages such as slurry evaporation, coal devolatilization, mixture fraction model and two-phase reactions coupled with turbulent flow and two-phase heat transfer, a comprehensive numerical model was constructed to simulate the coal gasification process. The influence of turbulence on the gas properties was taken into account by the PDF (Probability Density Function) model. A numerical simulation with the coal gasification model is performed on the Conoco-Philips type gasifier for IGCC plant. Gas temperature distribution and product gas composition are also presented. Numerical computations were performed to assess the effect of variation in oxygen to coal ratio and steam to coal ratio on reactive flow field. The concentration of major products, CO and H2 were calculated with varying oxygen to coal ratio (0.2-1.5) and steam to coal ratio(0.3-0.7). To verify the validity of predictions, predicted values of CO and H2 concentrations at the exit of the gasifier were compared with previous work of the same geometry and operating points. Predictions showed that the CO and H2 concentration increased gradually to its maximum value with increasing oxygen-coal and hydrogen-coal ratio and decreased. When the oxygen-coal ratio was between 0.8 and 1.2, and the steam-coal ratio was between 0.4 and 0.5, high values of CO and H2 were obtained. This study also deals with the comparison of CFD (Computational Flow Dynamics) and STATNJAN results which consider the objective gasifier as chemical equilibrium to know the effect of flow on objective gasifier compared to equilibrium. This study makes objective gasifier divided into a few ranges to study the evolution of the gasification locally. By this method, we can find that there are characteristics in the each scope divided.

• Journal of Distribution Science
• /
• v.14 no.7
• /
• pp.83-90
• /
• 2016

Purpose - This study focuses on new type distribution channel that named as Omnichannel. Omnichannel is developed from Multichannel which is used in many distribution channels to buy or selling goods. Omnichannel basically needs an Information and Communications Technologies(ICT) to use, so researcher conduct a Technology Acceptance Model(TAM) to research model. Customer-brand relationship was used as dependent variable to focus on the role of Omnichannel. Research design, data, and methodology - The subject of this study is customer who purchase goods or service through omnichannel. Based on the literature from the preceding research analysis of TAM and customer-brand relationship, this study was constructed by the reference to previous studies, final research model design for figure out casual relationship among perceived ease of use, perceived usefulness, omnichannel use and customer-brand relationship. From 2016 February 3 to March 17, questionnaire survey targeted customers who use online and offline channels. 273 questionnaire survey had conducted, then, 252 survey data were available for empirical analysis. Researcher provide descriptive statistics for checking generality. Cronbach's alpha value was used to check the reliability of data. Exploratory factor analysis was used for purification of values and eigenvalue checking. After EFA, Confirmatory factor analysis was used to prepare structural equation modeling with executing structural equation modeling for confirming hypothesis which developed by researcher. Results - The main results of this empirical study are as follows. First, omnichannel's perceived ease of use has positive significant effect on perceived usefulness(estimate: 0.579). Moreover, omnichannel's perceived ease of use and perceived usefulness has positive significant effect on omnichannel use(estimate: 0.325,0.648). Second, using omnichannel has positive significant effect on brand-customer relationship(estimate: 0.521). Every hypothesis adopted as researcher designed. This study found out the intermediate relationship between perceived ease of use and omnichannel use by investigating hypothesis. Conclusions - Base on the empirical result, this study confirmed that TAM theory perceived has relation with omnichannel. First, factors of TAM has positive effect on omnichannel use, so it highlights the important role of customer based interface and usefulness. Especially, perceived usefulness has high indirect influence on ease of use and use of omnichannel. It seems that when customers try to decide use or not use omnichannel, customers focus on percept benefits from omnichannel. Thus, a provider should applicate attractive price table, accurate product or service information and high switching cost strategy to emphasize the usefulness of omnichannel. Second, using omnichannel enhances the relationship between customers and brand, because there are more time and frequency to serve customers. It is important because good relationship between customers can increase the future's financial performance through word of mouse, positive brand image and loyalty to brand or company. Finally, despite of empirical result and implications, this study has limitations. First, there are only a few previous studies about omnicahnnel, so literature reviews are restricted. While set up the factors which can affect the use of omnichannel, next study should be considered with broader theories or models(ex: contingency theory). Second, omnichannel has developed from multichannel, so comparative analysis is needed between these methods because there is a possibility about different forte character of each distribution system on customer's consuming patterns.

• Journal of the Korea Concrete Institute
• /
• v.18 no.4 s.94
• /
• pp.449-458
• /
• 2006

The discharge of fly ash that is produced by coal-fired electric power plants is rapidly increasing in Korea. The utilization of fly ash in the raw materials would contribute to the elimination of an environmental problem and to the development of new high-performance materials. So it is needed to study the binder obtained by chemically activation of pozzolanic materials by means of a substitute for the cement. Fly ash consists of a glass phase. As it is produced from high temperature, it is a chemically stable material. Fly ash mostly consists of $SiO_2\;and\;Al_2O_3$, and it assumes the form of an oxide in the inside of fly ash. Because this reaction has not broken out by itself, it is need to supply it with additional $OH^-$ through alkali activators. Alkali activators were used for supplying it with additional $OH^-$. This paper concentrated on the strength development according to the kind of chemical activators, the curing temperature, the heat curing time. Also, according to scanning electron microscopy and X-Ray diffraction, the main reaction product in the alkali activated fly ash mortar is Zeolite of $Na_6-(AlO_2)_6-(SiO_2)_{10}-12H_2O$ type.

• Journal of Digital Contents Society
• /
• v.12 no.1
• /
• pp.85-94
• /
• 2011

QoS(Quality of Service) is defined as "The collective effect of service performance which determines the degree of satisfaction of a user of the service" by ITU-T Rec. E.800. While the use of VoIP(Voice Over Internet Protocol) has been widely implemented, persistent problems with QoS are a very important sue which needs to be solved. This research is finding the assignment of VoIP QoS to deduct how to manage the control system and presenting the QoS control process and framework under NGN(Next Generation Network) environment. The trial framework is the modeling of the QoS measurement metrics, instrument, equipment, method of measurement, the series of cycle & the methodology about analysis of the result of measurement. This research underlines that the vulnerability of the VoIP protocol in relation to its QoS can be guaranteed when the product quality and management are controlled and measured systematically. Especially it's very important time to maintain the research about VoIP QoS measurement and control because the big conversion of new network technology paradigm is now spreading. In addition, when the proposed method is applied, it can reduce an overall delay and can contribute to improved service quality, in relation to signal, voice processing, filtering more effectively.

• Journal of the Institute of Convergence Signal Processing
• /
• v.5 no.2
• /
• pp.111-118
• /
• 2004

Techniques based on thresholding of wavelet coefficients are gaining popularity for denoising data because of the reasonable performance at the low complexity. The VisuShrink which removes the noise with the universal threshold is one of the techniques. The universal threshold is proportional to the noise deviation and the number of data samples. In general, because the noise deviation is not known, one needs to estimate the deviation for determining the value of the universal threshold. But, only for the finest scale wavelet coefficients, it has been known the way of estimating the noise deviation, so the noise in coarse scales cannot be removed with the VisuShrink. We propose here a new denoising method which removes the noise in each scale except the coarsest scale by Visushrink method. The noise deviation at each band is estimated by the monotonic transform and weighted deviation, the product of estimated noise deviation by the weight, is applied to the universal threshold. By making use of the universal threshold and the Soft-Threshold technique, the noise in each band is removed. The denoising characteristics of the proposed method is compared with that of the traditional VisuShrink and SureShrink method. The result showed that the proposed method is effective in denoising on Gaussian noise and quantization noise.

• The Journal of Korea Institute of Information, Electronics, and Communication Technology
• /
• v.9 no.3
• /
• pp.306-311
• /
• 2016

Software reliability in the software development process is an important issue. Infinite failure NHPP software reliability models presented in the literature exhibit either constant, monotonic increasing or monotonic decreasing failure occurrence rates per fault. In this paper, reliability software cost model considering logarithmic and exponential fault detection rate based on observations from the process of software product testing was studied. Adding new fault probability using the Goel-Okumoto model that is widely used in the field of reliability problems presented. When correcting or modifying the software, finite failure non-homogeneous Poisson process model. For analysis of software reliability model considering the time-dependent fault detection rate, the parameters estimation using maximum likelihood estimation of inter-failure time data was made. The logarithmic and exponential fault detection model is also efficient in terms of reliability because it (the coefficient of determination is 80% or more) in the field of the conventional model can be used as an alternative could be confirmed. From this paper, the software developers have to consider life distribution by prior knowledge of the software to identify failure modes which can be able to help.

• Journal of Intelligence and Information Systems
• /
• v.18 no.2
• /
• pp.85-105
• /
• 2012

In recent years, IT advancement has brought out the new Internet communication environment such as online social network services, where people are connected in global network without temporal and spatial limitation. The popular use of online social network helps people share their experience and preference for specific products and services, thus holding large potential to significantly affect firms' business performance through Word-of-Mouth (WOM). This study examines the role of online social network in raising WOM effect on the movie industry by comparing with the similar role of Internet portal, another major online communication channel. Analyzing 109 movies and data from both Twitter and Naver movie, we found that significant WOM effect exists simultaneously in both Twitter and Naver movie. However, we also found that different figures of online viral effects exist depending on the popularity of movies. In the hit movie group, before the movie release, the WOM effect occurs only in Twitter while the WOM effect arises in both Twitter and Naver movie at the same time after the movie release. In the less-popular (or niche) movie group, the WOM effect occurs in both Twitter and Naver movie only before the movie release. Our findings not only deepen theoretical insights into different roles of the two online communication channels in provoking the WOM effect on entertainment products but also provide practitioners with incentive to utilize SNS as strategic marketing platform to enhance their brand reputations.

• Korean Journal of Comparative Education
• /
• v.28 no.4
• /
• pp.221-248
• /
• 2018

The purpose of this study was to analyze the performance of the Daegu Happiness Competency Education Program. It was confirmed that students, parents, teachers, and education professions are aware of the middle and higher level of education for happiness in Daegu in terms of the formation and operation of the curriculum. There is no significant difference between students and parents in terms of average value, and teachers' perception level is relatively high, which is understandable in that teachers are the subjects of the curriculum organization and operation. In addition, there was no statistically significant difference between the parents and the school level, but there were significant differences between students and teachers. In particular, students' and teachers' perceptions were lowered as the number of schools increased, unlike the predictions. They showed the lowest results in the special schools, autonomous schools and special schools. The reason for this is that Daegu Happiness Competency Education was implemented in 2014, and it was because there was little room to recognize and accept the new curriculum due to the burden of college entrance examination or employment. In the future, it will naturally improve as the education process is settled, but here we can find suggestions for the establishment of Daegu Happiness Competency Education.

• Membrane Journal
• /
• v.29 no.3
• /
• pp.173-182
• /
• 2019

Much research has been made for finding new and eco-friendly alternative sources of energy to solve the problems related with the pollution caused by emissions of greenhouse gases such as carbon dioxide as the use of fossil fuels increases worldwide. Among them, fuel cells draws particular interests as an eco-friendly energy generator because only water is obtained as a by-product. Anion exchange membrane-based alkaline fuel cell (AEMFC) that uses anion exchange membrane as an electrolyte is of increased interest recently because of its advantages in using low-cost metal catalyst unlike the PEMFC (potton exchange membrane fuel cell) due to the high-catalyst activity in alkaline conditions. The main properties required as an anion exchange membrane are high hydroxide conductivity and chemical stability at high pH. Recently we reported a chemically crosslinked poly(2-dimethyl-1,4-phenylene oxide) (PPO) by reacting PPO with N,N,N',N'-tetramethyl-1,6-hexanediamine as novel anion exchange membranes. In the current work, we further developed the same crosslinked polymer but having enhanced physicochemical properties, including higher conductivity, increased mechanical and dimensional stabilities by using the PPO with a higher molecular weight and also by increasing the crosslinking density. The obtained polymer membrane also showed a good cell performance.

• The Korean Journal of Franchise Management
• /
• v.5 no.1
• /
• pp.109-141
• /
• 2014

Recently, the interests of consumers in firms that implement the social commitment activities have been consistently growing. Consumers' evaluation about the level of corporate social responsibility(CSR) can affect the overall image for product or service of corporation. This recent changes make a marketer to have to consider direct and indirect effects of CSR efforts on the market performance. This phenomena is also found in the franchise industry. The importance of CSR is more critical rather than other industries since each franchisor should care franchisees as well as end users. Franchisors' execution of CSR could increase satisfaction of end user through consonance of activities provided by franchisees. However most franchisor stay in focusing on the traditional CSR activities. Therefore, this study aims to enhance the understanding the CSR in franchise and provide the phase model of CSR development for general firms including franchise. After diagnosis the firms with the proposed model, the study found many franchisors have huge gap between current CSR activities and higher level of CSR policies that franchisor have to make facing. This study call franchisors to reduce this gap by implementing new CSR efforts. If they answer for this calling, franchise industry could leap for making the best practice of creating shared value with other stakeholders.