• Journal of Satellite, Information and Communications
• /
• v.12 no.4
• /
• pp.120-124
• /
• 2017

This paper describes the product of search and rescue system with dynamic model. This spread spectrum system based new standard of COSPAS-SARSAT is results of RF signal generation and transmission. we will test performance evaluation which implement signal process adapting Dynamic model and we will adapt the CAF model using TDOA and FDOA relationship.

• International Journal of Fuzzy Logic and Intelligent Systems
• /
• v.6 no.3
• /
• pp.217-222
• /
• 2006

Recently, LG chemical corporation developed new material called HYPERIER, which has an excellent barrier characteristic. It has many layers which are made of nano-composite within LDPE(Low-Density Poly Ethylene). In order to guarantee the quality of the final product from the production line, a certain test equipment is required to investigate the existence of layers inside the HYPERIER. In this work, ultrasonic sensor based test equipment for investigating the existence of inner layers is proposed. However, it is a tedious job for human operators to check the existence by just looking at the resounding waveform from ultrasonic sensor. Therefore, to enhance the performance of the ultrasonic test equipment, wavelet and PCA(Principle Componet Analysis) schemes are introduced into neural network scheme which is used for classification. To verify the feasibility of the proposed scheme, some experiments are executed.

• Transactions of the Korean Society of Machine Tool Engineers
• /
• v.11 no.5
• /
• pp.81-87
• /
• 2002

The existing compressor steel seal used in automotive air-conditioner has the problem of oil leakage and deterioration in shielding performance, due to the abrasion and corrosion of the material. A new type of polymer resin seal studied in this research has the characteristics of high anti-abrasiveness and anti-corrosiveness, which can oversome the defects of the steel seal. In addition, the seal needs lower manufacturing cost and is appropriate to mass production, because it is made by the injection molding method requiring no mechanical processing. The profile generation program for seal mold has been developed using the gradient method, and the molding characteristics of the seal have analyzed through the flow analysis and the warpage analysis. The program has been verified by comparing the analysis results with the measured data of the test product. The research might be said to provide the basic method to produce the polymer resin seals with various types and dimensions.

• Journal of Marine Bioscience and Biotechnology
• /
• v.4 no.1
• /
• pp.6-10
• /
• 2010

Indonesia is well-known as biggest producer of seaweed especially for Eucheuma and Gracilaria and also has huge potential resources and capability to develop seaweed cultivation and product. There are several provinces which have potential resources and have been contributing on seaweed production. The next challenge about seaweed production is using integrated system on brackishwater and marine aquaculture. Furthermore, about 2,000,000 ton of potential seaweed production is not explored yet. This article also tries to figure out some related aspects which are technical, economical and forecasting aspect. There is a disease which named "ice-ice" is one of the main problem and giving a new challenge in developing of problem solving for seaweed cultivation method. Economical parameters are also main important key to find out the feasibility of seaweed cultivation industry. In addition, the seaweed cultivation and production in Indonesia also have potential performance on biofuel resources as a part for solving the world problem on energy demand.

• Proceedings of the Optical Society of Korea Conference
• /
• 2007.07a
• /
• pp.365-366
• /
• 2007

Micro jetting drop inspection system is essential to measuring micro drop volume. Measuring pico-liter drop volume is useful for new LCD color filter product process that is based on inkjet printing technology. To upgrade the reliability in drop measurement system, we use the auto focusing & multi drop reiteration & blurring average algorism. First of all we used standard mark for gage R&R in the vision system. Finding the most suitable threshold for multi blurring drop, is the main key of this research. Sensitivity of vision system is a standard in measuring the upgrade system level. So, suitable threshold can upgrade the performance of jetting drop inspection system.

• Journal of the Korean Institute of Telematics and Electronics A
• /
• v.30A no.9
• /
• pp.14-23
• /
• 1993

In this paper, we present analysis results of various intermodulation products (IMPs) evaluation methods previously proposed for nonlinear systems. The results indicate that out of these methods, Fuenzalida and Simbo's method is the best for efficient evaluation of IMPs. Also, we present a detailed mathematical analysis of IMP and show how to apply the equations related to IMP to actual program implementations with examples. In this paper, we newly introduce three methods to reduce the IMP calculation time and improve the accuracy of the outputs :1) TWTA curve fitting method by LS (Least Square), 2) IMP evaluation technique which is based on a look-up table 3) Gaussian spectral shaping for PSK signal instead of convolution. The IMP evaluation results obtained by the new approaches introduced in this paper resulted in a good match with the published outputs in the open literature and showed improved performance especially in the TWTA curve .

• International Commerce and Information Review
• /
• v.7 no.1
• /
• pp.75-94
• /
• 2005

With most major full service banks having launched transactional Internet banking, attention is shifting to the realities of managing the Internet channel as a profitable component of an overall delivery strategy. In addition to examining Case Study and Internet Bank Model. Services of Internet Banking available through the Internet are as follows. 1. credit card loans, personal loans. 2. high-yield financial products. 3. insurance products. 4. securities products. 5. Case study of Foreign Internet Banking(ING, BNP, HSNC, City Bank). The study reviewed fields, including financial services, customer service, Website formation and design, convenience of use and system safety, Internet Banking Model, and many related areas. Internet Banking earned high marks in most fields. This study review focuses on the following: Understanding and meeting consumer expectations for us ability, site performance and functionality. Integrating the Internet channel into overall marketing, product delivery and customer service strategies. Strategies to increase customer satisfaction with Internet Banking and to attract new Internet bankers. therefore this study review activity model concretion of Internet Banking Model and Case Study.

• Journal of the Korean Society of Combustion
• /
• v.5 no.1
• /
• pp.99-108
• /
• 2000

Regenerative burner is a product of new combustion technology for realizing higher thermal efficiency and lower emissions, moreover utilizing very high preheated air temperature up to $1,000^{\circ}C$. In this study the experimental study was carried out to find out a combustion characteristics breaking the old combustion concept. From the variation of configuration of gas nozzle and hot test on the temperature distribution and NOx, CO, it was found out that the performance of regenerative burner was better than that of existing burner, mainly due to the effect of internal gas recirculation.

• Journal of Power System Engineering
• /
• v.9 no.4
• /
• pp.143-147
• /
• 2005

Graphites is well known to have superior advantages to high-temperature, high-pressured, and strong acid-state gas or liquid because it is very stable and chemical structure. Nowadays the new plant with high performance is developed in field of chemical industries, so the need of graphites is increasing rapidly. In this paper, newly developed graphite products with high density is investigated by the mechanical properties of that. I introduced the graphite material which developed for this experiment by the forming process in order to compare to the commercial graphite sheet from expanded graphite which made by the rolling process. Through measuring density and hardness test also tensile test, I investigated the characteristics of these materials. It is verified that the newly developed graphite products forming method is able to make graphite products which have superior mechanical properties than that of commercial graphite sheet.

• Journal of Power System Engineering
• /
• v.9 no.4
• /
• pp.148-154
• /
• 2005

Thermostable property is one of most important characteristics of graphite. Commercial graphites sheet from expanded graphite is using for high-temperature elements. Nowadays the new plant with high performance is developed in field of chemical industries, so the need of graphites is increasing rapidly. In this paper, the thermostable properties of newly developed graphite products with high density is investigated. I introduced the graphite material which developed for these heat tests by NGF method in order to test thermostable properties by comparing to the results of the commercial graphite sheet from expanded graphite in same condition. Through measuring the weight reducing ratio with various specimens in some conditions, I investigated the thermostable characteristics of these materials. It is verified that the graphite products by NGF method has almost same or superior thermostable properties comparing with that of commercial graphite sheet. Also the graphite products by NGF method have possibility of being better in thermostable properties.