• Journal of Animal Science and Technology
• /
• v.61 no.2
• /
• pp.69-76
• /
• 2019

Maize which has very high omega-6 fatty acid content has been used as a main feed grain for Hanwoo beef production to increase marbling, and thus omega-6 to omega-3 fatty acids ratio in Hanwoo beef is expected to be biased. To elucidate the current status of omega fatty acids ratio in Hanwoo beef, fatty acid profiles of neutral lipid and phospholipid fraction were analyzed separately using 55 Hanwoo steers' longissimus dorsi muscle slaughtered at Pyeongchang, Korea from Oct. to Nov. 2015. In addition, an association study was conducted to evaluate associations between single nucleotide polymorphism (SNP) markers from references and omega fatty acid profiles in phospholipid of Hanwoo beef samples using analysis of variance (ANOVA). In neutral lipid fraction, composition of saturated and monounsaturated fatty acids was higher and polyunsaturated fatty acids was lower compared to those in phospholipid fraction. The mean n-6/n-3 ratios of Hanwoo were $56.059{\pm}16.180$ and $26.811{\pm}6.668$ in phospholipid and neutral lipid, respectively. There were three SNPs showing statistically significant associations with omega fatty acid content. GA type of rs41919985 in fatty acid synthase (FASN) was significantly associated with the highest amount of C20:5 n-3 (p = 0.031). CC type of rs41729173 in fatty acid-binding protein 4 (FABP4) was significantly associated with the lowest amount of C22:2n-6 (p = 0.047). AG type of rs42187261 in FADS1 was significantly linked to the lowest concentration of C20:4 n-6 (p = 0.044). The total n-6/n-3 ratio of the steer which has all four SNP types in above loci (27.905) was much lower than the mean value of the total n-6/n-3 ratio in phospholipid of the 55 Hanwoo steers ($56.059{\pm}16.180$). It was found that phospholipid and neutral lipid of Hanwoo have very high n-6/n-3 ratios compared to the reported data from different cow breeds. Four SNPs in genes related with fatty acid metabolism showed significant associations with the fatty acid profile of phospholipid and may have potential as SNP markers to select Hanwoo steers in terms of n-6/n-3 balance in the future.

• Science of Emotion and Sensibility
• /
• v.22 no.2
• /
• pp.37-48
• /
• 2019

Current research explores the effect of language on the perception of facial emotion as suggested by the psychological construction theory of emotion by using a psychophysical method. In this study, we hypothesize that the perception of facial expression may be influenced if the observer is shown an affective word before he/she judges an expression. Moreover, we suggest that his/her understanding of a facial emotion will be in line with the conceptual context that the word denotes. During the two experiments conducted for this project, a control stimulus or words representing either angry or happy emotions were briefly presented to participants before they were shown a target face. These target faces were randomly selected from seven faces that were gradually morphed to show neutral to angry (in Experiment 1) and neutral to happy (in Experiment 2) expressions. The participants were asked to perform a two-alternative forced choice (2AFC) task to judge the emotion of the target face (i.e., decide whether it is angry or neutral, or happy or neutral). The results of Experiment 1 (when compared with the control condition) showed that words denoting anger decreased the point of subjective equality (PSE) for judging the emotion of the target as anger, whereas words denoting happiness increased the PSE. Experiment 2, in which participants had to judge expressions on a scale from happy to neutral, produced a contrasting pattern of results. The outcomes of this study support the claim of the psychological construction theory of emotion that the perception of facial emotion is an active construction process that may be influenced by information (such as affective words) that provide conceptual context.

• Journal of Power Electronics
• /
• v.14 no.6
• /
• pp.1178-1188
• /
• 2014

This study proposes a finite-state model predictive controller to regulate the load current and balance the DC-link capacitor voltages of a four-leg neutral-point-clamped converter. The discrete-time model of the converter, DC-link, inductive filter, and load is used to predict the future behavior of the load currents and the DC-link capacitor voltages for all possible switching states. The switching state that minimizes the cost function is selected and directly applied to the converter. The cost function is defined to minimize the error between the predicted load currents and their references, as well as to balance the DC-link capacitor voltages. Moreover, the current regulation performance is improved by using a two-step prediction horizon. The feasibility of the proposed predictive control scheme for different references and loads is verified through real-time implementation on the basis of dSPACEDS1103.

• Journal of Power Electronics
• /
• v.18 no.2
• /
• pp.573-587
• /
• 2018

Recently evolved power electronics' based domestic/residential appliances have begun to behave as single phase non-linear loads. Performing as voltage/current harmonic sources, those loads when connected to a three phase distribution network contaminate the line current with harmonics in addition to creating a neutral wire current increase. In this paper, an enhanced performance three phase four leg shunt active power filter (SAPF) controller is presented as a solution for this problem. The presented control strategy incorporates a hybrid predictive fuzzy-logic based technique. The predictive part is responsible for the SAPF compensating current generation while the DC-link voltage control is performed by a fuzzy logic technique. Simulations at various loading conditions are carried out to validate the effectiveness of the proposed technique. In addition, an experimental test rig is implemented for practical validation of the of the enhanced performance of the proposed technique.

• The Transactions of the Korean Institute of Power Electronics
• /
• v.18 no.1
• /
• pp.26-36
• /
• 2013

This paper presents a simple and cost-effective stand-alone rapid battery charging system of 30kW for electric vehicles. The proposed system mainly consists of active front-end rectifier of neutral point clamped 3-level type and non-isolated bi-directional dc-dc converter of multi-phase interleaved half-bridge topology. The charging system is designed to operate for both lithium-polymer and lithium-ion batteries. The complete charging sequence is made up of three sub-interval operating modes; pre-charge mode, constant-current mode, and constant-voltage mode. The pre-charge mode employs the stair-case shaped current profile to accomplish shorter charging time while maintaining the reliable operation of the battery. The proposed system is specified to reach the full-charge state within less than 16min for the battery capacity of 8kWh by supplying the charging current of 78A. Owing to the simple and compact power conversion scheme, the proposed solution has superior module-friendly mechanical structure which is absolutely required to realize flexible power expansion capability in a very high-current rapid charging system.

• Journal of the Korean Institute of Illuminating and Electrical Installation Engineers
• /
• v.25 no.6
• /
• pp.100-107
• /
• 2011

Since transmission and distribution neutral wires are connected with a substation grounding grid, it is very difficult to measure grounding resistance of isolated substation grounding grid after the substation is energized. It is impractical to isolate the grounding grid from other parallel connections such as distribution line neutrals and overhead ground wires for grounding resistance measurement only. In this paper, we proposed and demonstrated a novel measurement method of grounding resistance of isolated substation grounding grid. For this method, grounding current division factor and conventional FOP(Fall-Of-Potential) profiles were measured at power supplying 154[kV] substation. The obtained FOP profile was processed with the measured grounding current division factor to produce the grounding resistance of isolated grounding grid. Simulated FOP profile agreed well with the measured one showing the validity of the proposed method.

• Proceedings of the KIPE Conference
• /
• 2013.07a
• /
• pp.323-324
• /
• 2013

This paper presents a simple and cost-effective stand-alone rapid battery charging system of 30kW for electric vehicles. The proposed system mainly consists of active front-end rectifier of neutral point clamped 3-level type and non-isolated bi-directional dc-dc converter of multi-phase interleaved half-bridge topology. The charging system is designed to operate for both lithium-polymer and lithium-ion batteries. The complete charging sequence is made up of three sub-interval operating modes; pre-charge mode, constant-current mode, and constant-voltage mode. The pre-charge mode employs the stair-case shaped current profile to accomplish shorter charging time while maintaining the reliable operation of the battery. The proposed system is specified to reach the full-charge state within less than 16min for the battery capacity of 8kWh by supplying the charging current of 78A. Owing to the simple and compact power conversion scheme, the proposed solution has superior module-friendly mechanical structure which is absolutely required to realize flexible power expansion capability in a very high-current rapid charging system.

• Safety and Health at Work
• /
• v.8 no.4
• /
• pp.402-406
• /
• 2017

Transit workers constitute a blue-collar occupational group that have elevated smoking rates relative to other sectors of employed adults in the United States. This study analyzed cross-sectional tobacco survey data from 935 workers (60% African American; 37% female) employed at an urban public transit agency in California. Prevalence of current and former smoking was 20.3% and 20.6%, respectively. Younger workers were less likely than older workers to be current or former smokers. Having a complete home smoking ban was associated with decreased likelihood of being a smoker [odds ratio (OR) = 0.04, 95% confidence interval (CI) = 0.01-0.17], as were neutral views about whether it is easy for a smoker to take a smoking break during their shift (OR = 0.50, 95% CI 0.28-0.88). Current smoking among the sample is > 50% higher than the adult statewide prevalence. Potential points of intervention identified in this study include perceived ease of worksite smoking breaks and establishing home smoking bans. Tailored cessation efforts focusing on older transit workers more likely to smoke are needed to reduce tobacco-related disparities in this workforce.

• Journal of Electrical Engineering and Technology
• /
• v.1 no.3
• /
• pp.359-365
• /
• 2006

Since the start of the KSTAR (Korea Superconducting Tokamak Advanced Research) project, Instrumentation and Control (I&C) of the Neutral Beam Test Facility (NB-TF) has been striving to answer diverse requests arising from various facets during the project's development and construction phases. Hard-wired electrical circuits have been designed, tested, fabricated, and finally installed to the relevant parts of the system. In relation to the vacuum system I&C, controlling functions for the rotary pumps, a Roots pump, two turbomolecular pumps, and four cryosorption pumps have been constructed. I&C for the ion source operation are the temperature and flow rate signal monitoring, Langmuir probe signal measurements, gradient grid current measurements, and arc detector circuit. For the huge power system to be monitored or safely operated, many temperature measurement functions have also been implemented for the beam line components like the neutralizer, bending magnet, ion dump, and calorimeter. Nearly all of the control and probe signals between the NB test stand and the control room were made to be transmitted through the optical cables. Failures of coolant flow or beam line vacuum pressure were made to be safely blocked from influencing the system by an appropriate interlock circuit that will shut down the extraction voltage application to the system or prevent damages to the vacuum components. Preliminary estimation of the beam power through the calorimetric measurement shows that 87.9% of the total power of the 60kV/18A beam with 200 seconds duration is absorbed by the calorimeter surface. Most of these I&C results would be highly appropriate for the construction of the main NBI facility for the KSTAR national fusion research project.

• Journal of Physiology & Pathology in Korean Medicine
• /
• v.18 no.2
• /
• pp.599-605
• /
• 2004

Sopungchungyoung-tang (SCT) has been widely used in Korea as a treatment of atopic dermatitis. SCT consists of Talcum, Rehmannia glutinosa, Angelica sinensis, Paeonia lactiflora, Cnidium officinale, Ledebouriella divaricata, Schizonepeta tenuifolia, Scutellaria baicalensis, Glycyrrhiza uralensis, Mentha arvensis, Cordyceps cicadae. We examined the immunological effect of SCT in vitro. We studied about the effect of SCT on Th cells' differentiation. In the case of CD4 T cells under neutral condition where there was only rIL-2 stimulus, SCT inhibited IFN-γ secretion by 70-80 %. Likewise, SCT also inhibited the IL-4 secretion of neutral Th cells by 85-90 %. We also experimented with the polarized Th1 cells/ Th2 cells and their production of IFN-γ and IL-4, respectively. There also were inhibitory effects on the polarized cells like there was on neutral cells, they were not as strong on the polarized cells. Under Th1 polarized condition, SCT acted dose-dependently, while in Th2 cells, the IL-4 production was inversely proportional to the doses of SCT. From the current study, it can be concluded that SCT exerts inhibitory effects on cytokine production without interfering with immune cells' activity. The result that SCT inhibits IFN-γ and IL-4 confirms that it does have a effect on immunomodulation.