• Journal of Institute of Control, Robotics and Systems
• /
• v.6 no.7
• /
• pp.594-601
• /
• 2000

EIA-709.1 Control Network Protocol is the basic protocol of LonWorks systems that is emerg-ing as a fieldbus device. In this paper the protocol is implemented by using VHDL with FPGA and C program on an Intel 8051 processor. The protocol from the physical layer to the network layer of EIA-709.1 is im-plemented in a hardware level,. So it decreases the load of the CPU for implementing the protocol. We verify the commercial feasibility of the hardware through the communication test with Neuron Chip. based on EIA-709.1 protocol which is used in industrial fields. The developed protocol based on FPGA becomes one of IP can be applicable to various industrial field because it is implemented by VHDL.

• IEMEK Journal of Embedded Systems and Applications
• /
• v.7 no.1
• /
• pp.53-59
• /
• 2012

Recently, LEE et al. proposed an attribute-based authenticated key agreement protocol over home network, which aimed to support authentication and key agreement between user and home server. However, if the home server is attacked in the protocol, the effects are influenced to the overall home network components severly. Thereby, this paper proposes a new ticket-based authentication protocol using user attributes between user and home devices to solve the problem. The proposed protocol supports the various levels of security to user by diversifying the network accessibility depending on user attribute. Thereby, the protocol could support more secure home network services.

• Proceedings of the KIEE Conference
• /
• 2008.10b
• /
• pp.225-226
• /
• 2008

본 논문은 스케줄링 기반 Ad-hoc Network에서의 Relay Network Protocol에 관한 것으로, Koinonia V2.0의 MAC Layer Protocol을 기반으로 Relay Network Protocol을 설계하였다. Ad-hoc Network 기반의 Relay Network Protocol은 단일 주파수 채널을 이용한 Relay Network Protocol과 듀얼 주파수 채널을 이용한 Relay Network Protocol이 있다. 전자는 하나의 모뎀 칩을 사용하여 시스템이 단순하고 전력소모가 적은 반면, 데이터 전송 속도가 낮아지고, 후자는 데이터 전송 속도에서 손해를 보지 않는 반면, 시스템이 복잡하고 전력소모가 많은 단점이 있다. 본 연구를 통해 Ad-hoc Network 기반의 Relay Network Protocol 구현에 대한 방법론을 제시할 수 있었다.

• International Journal of Computer Science & Network Security
• /
• v.23 no.10
• /
• pp.169-178
• /
• 2023

Wireless sensor network is wieldy use for IoT application. The sensor node consider as physical device in IoT architecture. This all sensor node are operated with battery so the power consumption is very high during the data communication and low during the sensing the environment. Without proper planning of data communication the network might be dead very early so primary objective of the cluster based routing protocol is to enhance the battery life and run the application for longer time. In this paper we have comprehensive of twenty research paper related with clustering based routing protocol. We have taken basic information, network simulation parameters and performance parameters for the comparison. In particular, we have taken clustering manner, node deployment, scalability, data aggregation, power consumption and implementation cost many more points for the comparison of all 20 protocol. Along with basic information we also consider the network simulation parameters like number of nodes, simulation time, simulator name, initial energy and communication range as well energy consumption, throughput, network lifetime, packet delivery ration, jitter and fault tolerance parameters about the performance parameters. Finally we have summarize the technical aspect and few common parameter must be fulfill or consider for the design energy efficient cluster based routing protocol.

• Journal of Institute of Control, Robotics and Systems
• /
• v.10 no.4
• /
• pp.334-340
• /
• 2004

In this paper, a Web-based management system for the building network is described. A multi-protocol converter based on SoC and embedded Linux is designed. The open source licensing, reliability, and broad hardware support are key reasons for use of embedded Linux in embedded industry. The multi-protocol converter integrates control network of RS-485 and LonWorks devices through TCP/IP protocol for a client with Java applet. The system consists of three-tier architecture, such as a client, a server that is performed on a multi-protocol converter, and control devices. The developed system includes the inverter motor control system with modbus protocol for the RS-485 network. The experiment results show that the multi-protocol converter using embedded Linux is a flexible and effective way to builda Web -based monitoring and control system.

• International journal of advanced smart convergence
• /
• v.6 no.3
• /
• pp.59-64
• /
• 2017

A wireless sensor network is a network in which nodes equipped with sensors capable of collecting data from the real world are configured wirelessly. Because the sensor nodes are configured wirelessly, they have limited power such as batteries. If the battery of the sensor node is exhausted, the node is no longer usable. If more than a certain number of nodes die, the network will not function. There are many wireless sensor network protocols to improve energy efficiency, among which LEACH Protocol is a typical example. The LEACH protocol is a cluster-based protocol that divides sensor space into clusters and transmits and receives data between nodes. Therefore, depending on how the cluster is structured, the shape of the energy cow may decrease or increase. We compare the network lifetimes of the existing LEACH protocols and the three types of protocols that have been improved using fuzzy methods for cluster selection.

• International Journal of Computer Science & Network Security
• /
• v.21 no.12
• /
• pp.1-8
• /
• 2021

In Mobile Ad-Hoc Network (MANET) Application, routing protocol is essential to ensure successful data transmission to all nodes. Ad-hoc On-demand Distance Vector (AODV) Protocol is a reactive routing protocol that is mostly used in MANET applications. However, the protocol causes Route Request (RREQ) message flooding issue due to the broadcasting method at the route request stage to find a path to a particular destination, where the RREQ will be rebroadcast if no Request Response (RREP) message is received. A scalable neighbor-based routing (SNBR) protocol was then proposed to overcome the issue. In the SNBR protocol, the RREQ message is only rebroadcast if the number of neighbor nodes less than a certain fix number, known as drop factor. However, since a network always have a dynamic characteristic with a dynamic number of neighbor nodes, the fix drop factor in SNBR protocol could not provide an optimal flooding problem solution in a low dense network environment, where the RREQ message is continuously rebroadcast RREQ message until reach the fix drop factor. To overcome this problem, a new broadcasting method as Dynamic SNBR (DSNBR) is proposed, where the drop factor is determined based on current number of neighbor nodes. This method rebroadcast the extra RREQ messages based on the determined dynamic drop factor. The performance of the proposed DSNBR is evaluated using NS2 and compared with the performance of the existing protocol; AODV and SNBR. Simulation results show that the new routing protocol reduces the routing request overhead, energy consumption, MAC Collision and enhances end-to-end delay, network coverage ratio as a result of reducing the extra route request messages.

• Proceedings of the Korea Information Processing Society Conference
• /
• 2016.10a
• /
• pp.234-237
• /
• 2016

Address Resolution Protocol (ARP) is used for mapping a network address to physical address in many network technologies. However, since ARP protocol has no security feature, it always abused by attackers for performing ARP-based attacks. Researchers presented many technologies to improve ARP protocol, but most of them require a high implementation cost or scarify the network performance for using ARP protocol securely. In this paper, we present an ARP-disabled network system to neutralize the ARP-based attacks. "ARP-disabled" means suppress the ARP messages like request, response and broadcast messages, but not the ARP table. In our system, ARP tables are used for managing static ARP entries without prior knowledge (e.g. IP, MAC list of client devices). This is possible because the MAC address was designed to be derived from IP address. In general, our system is safe from the ARP-based attacks even the attacker has a strong power. Moreover, we saved network bandwidth by disabling the ARP messages.

• IEMEK Journal of Embedded Systems and Applications
• /
• v.16 no.6
• /
• pp.247-251
• /
• 2021

We propose a protocol for Ethernet-based industrial real-time communication networks. In the protocol, the master periodically transmits control frames to all slaves, and the ring-type network topology is selected to achieve high-speed transmission speed. The proposed protocol is implemented in the form of both firmware and Linux kernel modules. To improve the transmission speed, the MAC address table is disabled in the firmware implementation, and the NAPI function of the Ethernet driver is removed in the Linux kernel module implementation. A network experiment environment is built with four ARM processor-based embedded systems and network operation experiments are performed for various frame sizes. From the experimental results, it is verified that the proposed protocol normally operates, and the firmware implementation shows better transmission speed than the Linux kernel module implementation.

• Journal of the Institute of Electronics Engineers of Korea TC
• /
• v.43 no.11 s.353
• /
• pp.35-43
• /
• 2006

In this paper we have presented a network based high-speed handover protocol using NetLMM(Network based Localized Mobility Management) WG protocol in IETF(Internet Engineering Task Force). We use IEEE 802.21 MIHS(Media Independent Handover Services) for improving handover latency and we analysis proposed Fast NetLMM protocol performance using Fluid Flow Mobility Model. Evaluation results show that the Fast NetLMM protocol performance is better than other mobility management protocols.