• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.16 no.12
• /
• pp.1348-1356
• /
• 1991

The need for MAN(Metropolitan Area Network)has been increased by demands for high performance comuter communication. According to the definition of MAN by IEEE 802.6 MANs have diameter of about 50km, bandwidth of more than 1Mbps, and limited delay, Because optical fibers have unique characteristics that make them attractive for the implementation of MANs several fiber optic networks suitable for MAN application have been proposed. Those networks have drawbacks such as unlimited delay, many processing nodes and limited number of stations. Also IEEE 802.6 proposals and oters improved networks were proposed, but they have complicated access procedures and data buffering and difficulties in implementation. This paper descrives the design of Fiber Optic Metropolitan Area Network in Seoul(Seoul FOMAN) to overcome the drawback, Seoul FOMAN is hierarchical MAN and designed based on the topology of 43 end offices in Seoul. We propose MAN topology, proper access protocol and analyze the performance.

• Journal of the Institute of Electronics Engineers of Korea CI
• /
• v.47 no.2
• /
• pp.1-10
• /
• 2010

Mapping virtual process topology to physical processor topology is one of the most important design issues in parallel programming. However, the mapping problem is complicated due to the topology irregularity and routing complexity. This paper proposes a new process mapping scheme called adjacency-based mapping (AM) for irregular cluster systems assuming that the two-dimensional mesh process topology is specified as an interprocess communication pattern. The cluster systems have been studied and developed for many years since they provide high interconnection flexibility, scalability, and expandability which are not attainable in traditional regular networks. The proposed AM tries to map neighboring processes in virtual process topology to adjacent processors in physical processor topology. Simulation study shows that the proposed AM results in better mapping quality and shorter interprocess latency compared to the conventional approaches.

• The KIPS Transactions:PartC
• /
• v.8C no.4
• /
• pp.405-414
• /
• 2001

전력연구원에서는 ATM WAN 통합망 기반 구축을 통하여 통신회선 임대비용의 절감과 안정적이고 고속의 인터넷 서비스를 수용함으로써 통신망의 경쟁력을 확보하는 것을 목표로 ATM 기반 전력통신망을 설계하였다. 이를 위하여 기존의 패킷 통신망 트래픽 통계 분석결과와 연간 트래픽 증가량 예측치를 기반으로 향후 서비스 수용계획을 고려한 토폴로지와 링크용량을 설계하였으며, 이를 바탕으로 전력통신망에서의 ATM 스위치 기반 네트워크 모델을 확립하였다. 본 논문에서는 ATM 기반 전력통신망의 설계결과를 요약한다.

• Journal of the Korean Operations Research and Management Science Society
• /
• v.22 no.3
• /
• pp.23-36
• /
• 1997

In the design of telecommunication network, the network configuration using hubbing topology is useful for designing and managing the network efficiently : i. e. all of central offices (COs) are grouped into clusters. Each cluster has one hub consisting of large-scale transmission facilities like digital cross-connect systems and ATMs. In clustering process, the community of interest and geographical factor should be considered. However, there exists a tradeoff between two factors. One is to minimize total link costs for geographical factor and the other is to maximize the total intra-cluster traffics for community of interest. Hence, this can be solved by multiobjective linear programming techniques. In this paper, the problem under considerations is formulated as two p-median subproblems taking into considerations total costs and total intra-traffics, respectively. Then we propose the algorithm to solve the problem based on the concept of cost-traffic tradeoff. The algorithm enables to identify efficient cost-traffic tradeoff pairs. An illustration is also presented.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.32 no.11B
• /
• pp.663-672
• /
• 2007

This paper proposes an algorithm for design of a multiple ring network that can be applied to an arbitrary topology in the WDM optical transport networks. Especially, we suggest an integer linear program(ILP) formulation with the objective of minimizing the total cost of nodes based on the reconfigurable OADM(ROADM) architecture and propose a heuristic algorithm to reduce computational complexity of the exact problem formulation. To evaluate the performance and validity of this scheme, we applied it to an NSFnet topology assuming the dynamic or static traffic condition and compared it with a mesh methodology about capacity of connection requests and the total cost of the nodes.

• 제어로봇시스템학회:학술대회논문집
• /
• 2002.10a
• /
• pp.42.6-42
• /
• 2002

Kohonen's self organizing feature map (SOFM) converts arbitrary dimensional patterns into one or two dimensional arrays of nodes. Among the many competitive learning algorithms, SOFM proposed by Kohonen is considered to be powerful in the sense that it not only clusters the input pattern adaptively but also organize the output node topologically. SOFM is usually used for a preprocessor or cluster. It can perform dimensional reduction of input patterns and obtain a topology-preserving map that preserves neighborhood relations of the input patterns. The traditional SOFM algorithm[1] is a competitive learning neural network that maps inputs to discrete points that are called nodes on a lattice...

• Proceedings of the Korean Society for Information Management Conference
• /
• 1995.08a
• /
• pp.21-24
• /
• 1995

이 논문은 지능형 정보검색을 위한 신경망 시스팀을 구축하는데 있어서 신경망을 어떻게 디자인하는 것이 가장 이상적인지에 관해 기술한다. 구체적으로 말하면, 신경망 위상 (Network Topology) 와 학습매개변수 (Learning Parameter)들이 신경망 시스팀 성능에 어떠한 영향을 미치는 지에 대해 문헌조사를 통해 검토하고 있다. 그 결과 신경망 위상과 학습 매개변수는 정보검색을 위한 신경망 시스팀 효율성에 강하게 영향을 미치고 있으므로 신경망 설계시 이 요소들을 신중히 고려해서 결정해야 한다.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.25 no.1B
• /
• pp.15-30
• /
• 2000

The important considerations in the design of fiber-optic networks are reliability and survivability preparing against a failure. The SDH(Synchronous Digital Hierarchy), the international standard of optical transmission, offers several network reconfiguration methods that enable network to be automatically restored from failure. One of the methods is the SHR(Self Healing Ring), which is a ring topology system. Most network providers have constructed their backbone networks with SHR architecture since it can provide survivability economically. The network architecture has eventually evolved into a multi-ring network comprised of interconnected rings. This paper addresses multi-ring network design problems is to minimize ring-construction cost. This problem can be formulated with MIP(mixed integer programming) model. However, it is difficult to solve the model within reasonable computing time on a large scale network because the model is NP-complete. Furthermore, in practice we should consider the problem of routing demands on rings to minimize total cost. This routing problem involves multiplex bundling at the intermediate nodes. A family of heuristic algorithms is presented for this problem. These algorithms include gateway selection and routing of inter-ring demands as well as load balancing on single rings. The developed heuristic algorithms are applied to some network provider's regional and long-distance transmission networks. We show an example of ring design and compare it with another ring topology design. Finally, we analysis the effect bundling.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.7 no.4
• /
• pp.678-683
• /
• 2003

This study presents a result of performance with the design of network topology for voice and data integration under computer network. This network is consisted of FastEthernet, other LANs and ATM WAN(wide area network), and performance evaluation of delay in a PBX+IP network, delay in a VoIP network and delay in a IP+ATM network will be shown. We use parameters including network bandwidth, number of packet, routing protocol(IGRP, OSPF). We simulate integrated of voice and data used PBX. we will study further about the case of integrated of voice and data environments using PBX. and, evaluate IP+ATM WAN average measured network delay and average delay of VoIP network.

• The Transactions of the Korean Institute of Electrical Engineers D
• /
• v.55 no.5
• /
• pp.199-204
• /
• 2006

To develop a safety-critical network in nuclear power plants that puts more stringent requirements than the competitive commercial ones do, we establish four design criteria - deterministic communication, explicit separation/isolation structure, reliability, verification & validation. According to those design criteria, the fundamental design elements are chosen as follows - a star topology, point-to-point physical link, connection-oriented link control and fixed allocation access control. After analyzing the design elements, we also build a communication architecture with TDM (Time Division Multiplexing) bus switching scheme. Finally, We develop a DDCNet (Deterministic Data Communication Network) based on the established architecture. The DDCNet is composed of 64 nodes and guarantees the transmission bandwidth of 10Mbps and the delay of 10 msec for each node. It turns out that the DDCNet satisfies the aforementioned design criteria and can be adequately utilized for our purpose.