• The Korean Society of Law and Medicine
• /
• v.17 no.2
• /
• pp.281-313
• /
• 2016

Our Constitution obliges the state to protect the health of the people, and the Medical Law, which embodied Constitution, sets out in detail the matters related to open the medical institution and one of them is to prohibit the operation of multiple medical institutions In the past, there was a provision stipulating the same purpose. But because the Supreme Court interpreted that several medical institutions could be opened if the medical treatment was not made at the additional medical instition which was opened in the another doctor,s license, multiple medical institutions could be opened and operated. However, some health care providers opened the several medical institutions to another doctor's license just by the excuse of the business management and then did illegal medical cares like the unfair luring of patients, overtreatment, and commition treatment for more profits. So, the health rights of the people came to be infringed on. Accordingly, lawmakers amended the Medical Law for medical personnel not to open and to operate more than one medical institution. As the amended medical law prohibited a medical personnel to open multiple medical institution, some medical personnels insisted that the amended medical law is unconstitutional under which they could not be able to open and operate medical institutions on based on free investment and bring out the benefits of network hospitals. But the regulation to prohibit multiple institutions does not apply only to a medical personnel. Many other experts like lawyer and pharmacist can open only one office under such a restriction. If the regulation goes out of force, the procedure that multiple medical institutions should be opened and operated in the capacity as a medical corporation or a non-profit corporation does not have to be followed. And we should keep in mind that the permission for medical personels to open multiple medical institutions could lead virtually to commercial hospital. If in the nation with a very low rate of public medical service, If only a few medical personnels with capital own many medical institutions and operate commercially them, this could cause a falling-off in quality of medical service, ultimately infringe on the health rights and the life right of the people.

• The Korean Journal of Emergency Medical Services
• /
• v.13 no.3
• /
• pp.41-58
• /
• 2009

Objective : The purpose of this study is to identify actual operations and issues of wireless paging system operation for the aged living alone as the end users of wireless paging system primarily in Gwangyang city, and thereby to explore possible advanced and integrated ways to promote social safety network for the aged. Methods : The survey tool used in this study was a structured questionnaire form consisting of question items. The researcher hereof conducted this survey by means of direct visit and interview during two seasons, i.e. from February to August, 2008 and from December 2008 to March 2009, respectively. Results : 1) For general demographic characteristics, it was found that 90.9% of all respondents were women and 61.2% of all respondents were at age 75 to 84. for health conditions, it was found that more than 90% of all respondents often took medicines due to their unhealthy body, and most of respondents suffered from musculoskeletal diseases 79.3% and circulatory diseases 61.6%. for walking capacity, it was found that 45.5% of all respondents used walking aids, and disable respondents (11.5% of all respondents) were represented primarily by those with physical disability (52.6% of disable respondents). for actual use of medical institutions, it was found 47.3% of all respondents relied on local clinics, since they preferred neighborhood hospitals or clinics they can trust for medical care. for social activities and supports, it was found that 43.6% respondents had 'needs for assistance at times' and 33.9% respondents have 'no need for assistance'. And it was found that the major difficulties in living alone at old age were represented primarily by health problems 37.8% and economic difficulties 33.5%. 2) For characteristics related to wireless paging system, it was found that 90.3% respondents used wireless paging system recommended by firemen, and 28.5% respondents used this system. and it was found that 59.6% respondents used this system once, and 85.2% respondents used it because of acute or chronic diseases. more than 90% respondents thought that they knew about wireless paging system and considered themselves safe, but 83.6% respondents didn't attach a remote control on their upper clothes, and even 49.1% respondents turned off the power of wireless paging system due to their concern about electricity bill and noise. 3) It was found that 83.6% respondents felt it necessary to use wireless paging system, and wireless paging users felt more satisfied with using the system than non-users, and 50.7% showed high satisfaction at certain psychological benefits like 'confidence in coping with critical situations' and 'a sense of relief'. In addition, it was found that some respondents who answered that 'they didn't turn off the paging system as they knew how it works' and those who answered that they knew 'how to use it' showed relatively high satisfaction. And some respondents who kept it well and felt it necessary also showed high satisfaction. 4) It was found that the level of satisfaction our respondents felt with using wireless paging system varied significantly availability($x^{2}$ = 12.759, p = .002), psychological advantages($x^{2}$ = 12.174, p = .002), knowledge about how to use system($x^{2}$ = 7.021, p = .016), power on/off($x^{2}$ = 13.221, p = .001), level of knowledge about system($x^{2}$ = 21.002, p = .000), maintenance($x^{2}$ = 9.871, p = .007) and level of necessity($x^{2}$ = 34.939, p = .000) on the statistical basis.

• Korean Journal of Remote Sensing
• /
• v.38 no.5_3
• /
• pp.925-938
• /
• 2022

Agricultural reservoirs are an important water resource nationwide and vulnerable to abnormal climate effects such as drought caused by climate change. Therefore, it is required enhanced management for appropriate operation. Although water-level tracking is necessary through continuous monitoring, it is challenging to measure and observe on-site due to practical problems. This study presents an objective comparison between multiple AI models for water-body extraction using radar images that have the advantages of wide coverage, and frequent revisit time. The proposed methods in this study used Sentinel-1 Synthetic Aperture Radar (SAR) images, and unlike common methods of water extraction based on optical images, they are suitable for long-term monitoring because they are less affected by the weather conditions. We built four AI models such as Support Vector Machine (SVM), Random Forest (RF), Artificial Neural Network (ANN), and Automated Machine Learning (AutoML) using drone images, sentinel-1 SAR and DSM data. There are total of 22 reservoirs of less than 1 million tons for the study, including small and medium-sized reservoirs with an effective storage capacity of less than 300,000 tons. 45 images from 22 reservoirs were used for model training and verification, and the results show that the AutoML model was 0.01 to 0.03 better in the water Intersection over Union (IoU) than the other three models, with Accuracy=0.92 and mIoU=0.81 in a test. As the result, AutoML performed as well as the classical machine learning methods and it is expected that the applicability of the water-body extraction technique by AutoML to monitor reservoirs automatically.

• Journal of Korean Society of Disaster and Security
• /
• v.17 no.1
• /
• pp.9-16
• /
• 2024

In Korea, as disasters become larger and more complex, there is a trend of shifting from a focus on response and recovery to a focus on prevention and preparedness. In order to prevent and prepare for disasters, each local government manages disaster management resources by stockpiling them. However, although disaster management resources are stored in individual warehouses, they are managed by department rather than by warehouse, resulting in insufficient management of disaster management resources due to the heavy workload of those in charge. In order to intensively manage these disaster management resources, an integrated disaster management resource management center is established and managed at the metropolitan/provincial level. In the case of Gangwon-do, the subject of this study, a warehouse is rented and operated as an integrated disaster management resource management center. When leasing an integrated management center, there is the inconvenience of having to move the location every 1 to 2 years, so it is deemed necessary to build a dedicated facility in an available site. To select a location candidate, network analysis was used to measure access to and use of facilities along interconnected routes of networks such as roads and railways. During network analysis, the Location-Allocation method, which was widely used in the past to determine the location of multiple facilities, was applied. As a result, Hoengseong-gun in Gangwon-do was identified as a suitable candidate site. In addition, if the integrated management center uses our country's logistics system to stockpile disaster management resources, local governments can mobilize disaster management resources in 3 days, and it is said that it takes 3 days to return to normal life after a disaster occurs. Each city's disaster management resource stockpile is 3 days' worth per week, and the integrated management center stores 3 times the maximum of the city's 4-day stockpile.

• Korean Journal of Remote Sensing
• /
• v.40 no.4
• /
• pp.387-396
• /
• 2024

Most very high-resolution (VHR) satellite images provide rational polynomial coefficients (RPC) data to facilitate the transformation between ground coordinates and image coordinates. However, initial RPC often contains geometric errors, necessitating correction through matching with ground control points (GCPs). A GCP chip is a small image patch extracted from an orthorectified image together with height information of the center point, which can be directly used for geometric correction. Many studies have focused on area-based matching methods to accurately align GCP chips with VHR satellite images. In cases with seasonal differences or changed areas, edge-based algorithms are often used for matching due to the difficulty of relying solely on pixel values. However, traditional edge extraction algorithms,such as canny edge detectors, require appropriate threshold settings tailored to the spectral characteristics of satellite images. Therefore, this study utilizes deep learning-based edge information that is insensitive to the regional characteristics of satellite images for matching. Specifically,we use a pretrained pixel difference network (PiDiNet) to generate the edge maps for both satellite images and GCP chips. These edge maps are then used as input for normalized cross-correlation (NCC) and relative edge cross-correlation (RECC) to identify the peak points with the highest correlation between the two edge maps. To remove mismatched pairs and thus obtain the bias-compensated RPC, we iteratively apply the data snooping. Finally, we compare the results qualitatively and quantitatively with those obtained from traditional NCC and RECC methods. The PiDiNet network approach achieved high matching accuracy with root mean square error (RMSE) values ranging from 0.3 to 0.9 pixels. However, the PiDiNet-generated edges were thicker compared to those from the canny method, leading to slightly lower registration accuracy in some images. Nevertheless, PiDiNet consistently produced characteristic edge information, allowing for successful matching even in challenging regions. This study demonstrates that improving the robustness of edge-based registration methods can facilitate effective registration across diverse regions.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.18 no.12
• /
• pp.1919-1927
• /
• 1993

A new MAC protocol has been proposed and analysed to relieve the unfairness problems exhibited by the basic version of the DQDB standard. DQDB MAC protocol has the unfairness problems in throughputs. message delay and so or. And when the slots are reused or the file transmissions takes long, the unfairness problems in the system become worse. The new access protocol proposed here, which of called the Balanced DQDB, guarantees a fair bandwidth distribution by using one bit of the dual bus network protocol and keeps up all characteristics of DQDB. the DQDB analysis model introduced by Wen Jing, et al, was considered to analyse a sequential balance distribution of solts. And the probabilities of the empty in operation mode were represented to determine the probabilities for busy bits to generate on each node of the bus using the Markov chain. Through the simulations. the performances of the proposed Balanced DQDB and that of the standard DQDB of the BWB mechanism were compared at the state that the values of the RQ or CD counter on each node varied dynamically. As the results, it is shown that the Balanced DQDB has the decrement of throughputs in upstream, but the numbers of the used empty slots at each node of the Balanced DQDB had more than that of the others because the Balanced DQDB has over 0.9 throughputs in the 70~80% nodes of total node and it has constant throughputs at each node. And there results were analogous to that of the analytical model.

• Journal of the Korean Association of Geographic Information Studies
• /
• v.17 no.1
• /
• pp.70-79
• /
• 2014

Following the technology developments of traffic network and communication for the wide area, the importance of the cooperation system to vitalize the wide area economy is increasing. Therefore, in this study, DongNam Kwon industry information system is established for the industrial information sharing based on GIS in the DongNam Kwon wide area economy. The DongNam Kwon is an industrial integration area centered with the manufacturing so that the operation of effective industrial cluster and cooperation systems are required across the administrational boundaries. To establish the database of the information, the information system was established utilizing already established industrial databases in Busan, Ulsan and Gyeongnam. But, various issues caused by the discordances among the data of each local government and the insufficiency of GIS based location information have been found. According to the analysis, the standardization considering the courses of collection, distributions and utilization are required immediately to solve the issues. This study establishes an 2-way industrial information system enabling the information creation and the phased approach between the administrator and the user in the bi-directions on the web by utilizing cadastral and numerical maps. The result of this study would have a meaning in providing a fundamental frame for cooperative responses and cooperation system for DongNam Kwon's industrial promotion using industrial information sharing.

• Spatial Information Research
• /
• v.20 no.2
• /
• pp.155-164
• /
• 2012

Indoor fire simulators have been used to analyse building safety in the events of emergency evacuation. These applications are primarily focused on simulating evacuation behaviors for the purpose of checking building structural problems in normal time rather than in real time situations. Therefore, they have limitations in handling real-time evacuation events with the following reasons. First, the existing models mostly experiment the artificial situations using randomly generated evacuees while real world requires actual data. Second, they take too long time in operation to generate real time data. Third, they do not produce optimal results to be used in rescueing or evacuation guidance. In order to solve these limitations, we suggest a method to build an evacuation simulation system that can be used in real-world emergency situations. The system performs numerous simulations in advance according to varying distributions of occupants. Then the resulting data are stored in DBMS. The actual person data captured in infrared sensor network are compared with the simulation data in DBMS and the querried data most closely is provided to the user. The developed system is tested using a campus building and the suggested processes are illustrated.

• Spatial Information Research
• /
• v.22 no.4
• /
• pp.89-102
• /
• 2014

The establishment and operation of Region-based Teleworking Centers(RTC) in Korea is in the initial stage at the moment. Although some studies have been conducted on telecommuting at home, few studies have been performed on the effects of all-out expansion and diffusion of region-based Teleworking Centers. Therefore, this study analyzed the reduction effect of commuting distance which is possible to obtain from the establishment of Teleworking Centers, based on the network in the Seoul Metropolitan Area, Subsequently, quantitative reduction of the effects of $CO_2$ were calculated from region-based Teleworking Centers. The results of the analysis indicated that region-based Teleworking Centers could reduce a total of 911 tons of $CO_2$ per day. When applying these results to 258 working days per year (according to Statistics Korea), 235,056 tons of $CO_2$ can be reduced annually by the establishment of Teleworking Centers. With quantity on environmental utility to be obtained from the establishment of Teleworking Centers, this study can be utilized as a guideline for selecting effective locations of Teleworking Centers in the future. It can also be helpful in decisions to determine the priority of extending operations of Teleworking Centers through comparisons among administrative districts.

• 제어로봇시스템학회:학술대회논문집
• /
• 2004.08a
• /
• pp.138-142
• /
• 2004

In this paper, we present a new method for monitoring of ECU's sensor signals of vehicle. In order to measure the ECU's sensor signals, the interfaced circuit is designed to communicate ECU and the Embedded Linux is used to monitor communication result through Web the Embedded Linux system and this system is said "ECU Interface Part". In ECU Interface Part the interface circuit is designed to match voltage level between ECU and SA-1110 micro controller and interface circuit to communicate ECU according to the ISO, SAE communication protocol standard. Because Embedded Linux does not allow to access hardware directly in application level, anyone who wants to modify any low level hardware must develop device driver. To monitor ECU's sensor signals the most important thing is to match serial level between ECU and ECU Interface Part. It means to communicate correctly between two hardware we need to match voltage and signal level, and need to match baudrate. The voltage of SA-1110 is 0 ${\sim}$ +3.3V and ECU is 0 ${\sim}$ +12V and, ECU's communication Line K does multiple operation so, the interface circuit is used to match voltage and signal level. In Addition to ECU's baudrate is 10400bps, it's not standard baudrate in computer environment. So, we need to develop a device driver to control the interface circuit, and change baudrate. To monitor ECU's sensor signals through web there's a network socket program is working in Embedded Linux. It works as server program and manages user's connections and commands. Anyone who wants to monitor ECU's sensor signals he just only connect to Embedded Linux system with web browser then, Embedded Linux webserver will return the ActiveX webbased measurement software. It works in web browser and inits ECU, as a result it returns sensor signals through web. All the programs are developed with GCC(GNU C Compiler) and, webbased measurement software is developed with Borland C++ Builder.