• ETRI Journal
• /
• v.40 no.5
• /
• pp.604-612
• /
• 2018

To solve the problem of unbalanced loads and the short network lifetime of heterogeneous wireless sensor networks, this paper proposes a node-selection algorithm based on energy balance and dynamic adjustment. The spacing and energy of the nodes are calculated according to the proximity to the network nodes and the characteristics of the link structure. The direction factor and the energy-adjustment factor are introduced to optimize the node-selection probability in order to realize the dynamic selection of network nodes. On this basis, the target path is selected by the relevance of the nodes, and nodes with insufficient energy values are excluded in real time by the establishment of the node-selection mechanism, which guarantees the normal operation of the network and a balanced energy consumption. Simulation results show that this algorithm can effectively extend the network lifetime, and it has better stability, higher accuracy, and an enhanced data-receiving rate in sufficient time.

• Journal of Communications and Networks
• /
• v.11 no.4
• /
• pp.406-415
• /
• 2009

In this work, we consider performance modeling of a wireless sensor network with a time division multiple access (TDMA) media access protocol with slot reuse. It is assumed that all the nodes are peers of each other and they have two modes of operation, active and sleep modes. We model the sensor network as a Jackson network with unreliable nodes with on and off states. Active and sleep modes of sensor nodes are modeled with on and off states of unreliable nodes. We determine the joint distribution of the sensor node queue lengths in the network. From this result, we derive the probability distribution of the number of active nodes and blocking probability of node activation. Then, we present the mean packet delay, average sleep period of a node and the network throughput. We present numerical results as well as simulation results to verify the analysis. Finally, we discuss how the derived results may be used in the design of sensor networks.

• Journal of the military operations research society of Korea
• /
• v.23 no.1
• /
• pp.100-114
• /
• 1997

The network for proving information exchange function in distributed system is interconnected among other networks which are in the state of independent construction and operation. However, due to various network protocols and distributed applications, Problems occurred in the area of network interconnectivity and interoperability of distributed applications in internetworking which should provide a good interoperability. This paper proposed an improved method for finding route which has the highest interworkability between end-systems using the interrelationship of network protocol. An algorithm and method of constructing a virtual network which is suitable for required distributed application are also proposed in this research.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.4 no.1
• /
• pp.45-58
• /
• 2000

Technical standards is directives for managing telecommunication network and also designing objectives for telecommunication network. The scope of technical standards varies from network environment of each countries but most countries compelled to observe the specified matters in technical standards. Generally, technical standards are the items extracted from national standards that must be followed by network providers. Technical standards is so very important to consist user's right and network operation that it is usually handled by national levels. In this paper, we analyze current status of technical standards for other countries and suggest some expected directions of technical standards schemes for domestic network.

• Proceedings of the KIEE Conference
• /
• 2003.07d
• /
• pp.2483-2485
• /
• 2003

As design a network system that should command and response to do tasks by PLC, to make factory automation for being distributed facilities which are not guaranteed procedure, through polling method, commands are send orderly by PLC and responses are answered by each sub-unit. It make a guarantee of sequence and drive a master-slave operation in network. This method help to distribute procedure systems and make possible dividing tasks to each unit. To make this method, network protocol's format have Master or Slave ID and tasking data and Master's command or Slave unit's report. In network interpret algorithm, skip algorithm are included and it make guarantee of protecting data though network are in noise. Data that are made by this method are send to PC to transmit long-distance user by internet.

• Journal of Korea Multimedia Society
• /
• v.24 no.6
• /
• pp.796-804
• /
• 2021

In computer vision, visual tracking method addresses the problem of localizing an specific object in video sequence according to the bounding box. In this paper, we propose a tracking method by introducing the feature correlation comparison into the siamese network to increase its matching identification. We propose a way to compute location of object to improve matching performance by a correlation operation, which locates parts for solving the searching problem. The higher layer in the network can extract a lot of object information. The lower layer has many location information. To reduce error rate of the object center point, we built a siamese network that extracts the distribution and location information of target objects. As a result of the experiment, the average center error rate was less than 25%.

• International journal of advanced smart convergence
• /
• v.11 no.1
• /
• pp.42-47
• /
• 2022

As smart factory is the factory which produces the products according to the customer's diverse demand and the changing conditions in it, it can be characterized by flexible production, dynamic reconstruction, and optimized production environment. To implement these characteristics, many kind of configuration elements in the smart factory should be connected to and communicated with each other. So the network is responsible for playing this role in the smart factory. As SDN (Software Defined Network) is the technology that can dynamically cope with the explosive increasing data amount and the hourly changing network condition, it is one of network technologies that can be applied to the smart factory. In this paper, we address SDN function and operation, SDN model suitable for the smart factory, and then performs the simulation for measuring this model.

• The Journal of Korea Institute of Information, Electronics, and Communication Technology
• /
• v.13 no.6
• /
• pp.523-529
• /
• 2020

Power distribution management system is essential for the efficient management and operation of power distribution networks. The power distribution system is a system that manages the distribution network based on IT, and has been evolving along with the development of the power industry. The current power distribution system is designed to operate at a relatively low network transmission speed based on the independent operation of the main equipment. However, due to distributed resources such as photovoltaic or energy storage devices, which are rapidly increasing in popularity in recent years, the operation of future distribution environments is becoming more complex, and various information needs to be collected in real time. In this study, the requirements of the next-generation power distribution system were derived to overcome the limitations of the existing power distribution system, and based on this, the communication network system and performance requirements for the distribution system were defined. In order to verify the performance of the designed system, a software-based terminal device simulator was developed because it takes excessive time and cost to introduce a large-scale system such as a power distribution system. Using the simulator, a test environment similar to the actual operation was established, and the number of terminal devices was increased up to 1,000. The proposed system was shown to satisfy the requirements to support the functions of the next-generation power distribution system, recording less than 10 % of the communication network bandwidth.

• Journal of Advanced Navigation Technology
• /
• v.17 no.6
• /
• pp.672-678
• /
• 2013

In this paper, with the development of Information technology, application service between IT and traditional industry has been on the rise. And there are many on-going discussions actively regarding the Air quality system based on wireless sensor network which monitor and control the aircraft environment automatically and manually with the application service of detecting harmful gas. In this paper, operation program constitute the administrator monitoring device, which collects data from sensor node of wireless sensor network and sensor node and transmits environment information to display and server. Also for remote monitoring, user operation program constitutes based on PC/smartphone. Under this, the harmful gas which is made in aircraft life is measured. Real time monitoring system based on wireless sensor network is designed and realized.

• Proceedings of the IEEK Conference
• /
• 1998.06a
• /
• pp.54-57
• /
• 1998

As the physical layer on telecommunication network is replaced fiber optic lines, it is increased the need of systematic maintenance for fiber optic lines. Korea Telecom has developed FLOMS in order to establish maintenance processes for optical fiber lines. FLOMS has functions which manages optical facilities and tests optical fiber lines automatically. As a resuls, this system can check and/or report a fault. Operator, who is reponsible for management of optical fiber lines, can test the characteristics of optical fiber lines remotely using FLOMS. As interpoerable with Digital Transmission Management System, FLOMS provides efficient management for optical fiber lines. This system improves the work process to find fault location fast, detect the degradation of fiber quality, and make database of optical facilities efficiently.