• Journal of Korean Academy of Nursing
• /
• v.33 no.2
• /
• pp.284-292
• /
• 2003

Purpose: The purpose of this study was to study the projected workforce of nephrology CNS in Korea. Method: Need models, ratio methods and expert opinion were used for projecting needs for the nephrology CNS. Result: In 2001, there are 28,046 ESRD(end stage of renal disease)patients, 304 renal replacement centers and 1695 nephrology nurses in Korea. the hemodialysis patients per hemodialysis nurse was 12. The number of nephrology CNS required to meet the demand for caring of ESRD patients in 2002, 2005 and 2020 was estimated at 616, 837 and 3105, respectively. 47 ESRD patients per nephrology CNS was revealed as a workforce standard before 2005. After 2005, It was 31 ESRD patients per nephrology CNS. Conclusion: This study founded the need to project future increments and development in supply of qualified nephrology CNS.

• 한국공간정보시스템학회:학술대회논문집
• /
• 2007.06a
• /
• pp.355-358
• /
• 2007

This paper is aimed that preparing to make good plan for great city ports, like Gwangyang port which is growing rapidly in Asia as a hub port. But I am worrying about the capacity of Gwangyang bay area to serve very great mission for the future, continuously. I hope that we are able to make good circumstances for our great ports. In this Gwangyang bay, we can realize that we may have some solutions for the traffic jam, because of the finite bay area. So I analyzed the rate of traffic jam that was derived from so many great ships to come and use the Gwangyang bay area. As a result, in recent year, 2005, 2006, ratio was growing rapidly, so we need so we need good works for this region.

• Journal of Drive and Control
• /
• v.12 no.4
• /
• pp.41-47
• /
• 2015

Hydraulic manipulators have been widely used in many different fields due to their high force/torque to inertia ratio. The increased speed of hydraulic manipulators requires solutions to problems ranging from mechanical design to the need to determine a robot model suitable for model-based control. As a solution, this paper presents the integration of SolidWorks with Simscape for designing and controlling hydraulic manipulators. The integration provides a platform for the rapid control prototyping of a hydraulic robot without the need to build actual prototypes. The mechanical drawings of a manipulator are first created using Solidworks and are then imported into Simscape, where the manipulator is represented by connected block diagrams based on the principle of physical modeling. Simulation examples for a 3D manipulator made by KNR SYSTEM INC are verified to show the effectiveness of the presented platform.

• Korean Journal of Organic Agriculture
• /
• v.9 no.3
• /
• pp.23-44
• /
• 2001

To address complex solutions to tack1e the cost rise with the increasing of the prices of crude oil, and to lower warming gas discharge in agricultural sector in line with the framework Convention on Climate Change, we need to net only develop the methods of simply reducing energy use ratio, but also effectively energize resources discharged in the course of agricultural production aimed at enabling repealed farming, and develop systems to reinvest such energy into agricultural production and apply them to actual farming. To that end, specifically, we need to reduce the energy cost in agricultural production, and produce and harness bio gas that makes it possible to stabilize the continued supply of energy. Thus, in this research, we seek to discuss energy use volume and warming gas discharge, and the characteristics of bio gas and its use methods alike, in agricultural sector, and thus present methods for environment-friendly and continual development in agriculture.

• Journal of Korean Society of Environmental Engineers
• /
• v.36 no.9
• /
• pp.609-613
• /
• 2014

The aim of this study was effect of N/P ratio on the nutrient removal in the wastewater using microalgae. For this experiment, 1 to 70 various N/P ratio was prepared and used microalgae as Botryococcus braunii in the wastewater. The results of this study were that 1 to 30 of N/P ratio was need for biomass productivity in the wastewater. TN removal was measured 82% for 1 to 30 N/P ratio and 73-78% for 31 to 70 N/P ratio. TP removal in 1 to 20 N/P ratio was determined up to 80%, but over 21 N/P ratio was decreased significantly and was not changed around 22% of TP removal in the 50 to 70 N/P ratio. Therefore, the optimum N/P ratio in the wastewater was 1 to 30 for biomass productivity, TN and TP removal. The correlation ($R^2$) of TP removal and biomass productivity was 0.9126. However, the relationship between TN removal and biomass productivity was not found. The P content in the wastewater was influenced more than that of TN content.

• Korean Journal of Health Education and Promotion
• /
• v.26 no.1
• /
• pp.81-92
• /
• 2009

Objectives: This study set out to investigate the relationship among the factors of metabolic syndrome diagnosis criteria, their risk factors including general characteristics, and the distribution of the diagnosis criteria and risk among the adult residents of a rural community. Methods: Among 1,968 residents, those who had three or more of the risk factors of metabolic syndrome, which include blood pressure, blood glucose, triglyceride, abdominal obesity, and HDL-C, were categorized as the metabolic syndrome group. And their correlations were analyzed. Results: As for the risk ratio with five factors of the metabolic syndrome diagnosis criteria, it was high according to age and smoking. In addition, the results show that body fat percentage, hs-CRP, insulin, BMI, PP2, total cholesterol, and W/Ht also had much impact on increasing the risk ratio of the metabolic syndrome diagnosis criteria. It turned out that metabolic syndrome was affected by the body mass index(BMI), insulin, waist to height ratio(W/Ht), and hs-CRP. It was 2.51 times crude odds ratio that BMI over the 25kg/m2 in the ratio of the fact of metabolic syndrome and adjusted for sex odds ratio 2.50times and W/Ht was 3.31times, adjusted for sex odds ratio 3.25 times. Conclusion: BMI, W/Ht and smoking of the general characteristics seem to have close relationships with high correlations between the metabolic syndrome diagnosis criteria and the risk factors. Thus there is an urgent need to evaluate them and take interventions and monitoring measures for the clustering of risk factors.

• Journal of the Korean Society of Tobacco Science
• /
• v.22 no.1
• /
• pp.76-83
• /
• 2000

This study was carried out to predict blending ratio of cut tobacco(CT), expanded stem(ES), and expanded cut tobacco(ECT) in cigarettes. CT, ES, and ECT samples from A brand were, ground and blended with reference to A blending ratio, and scanned by near infrared spectroscopy(NIRSystem Co., Model 6500). Calibration equations were developed and then determined blending ratio by NIRS. The standard error of calibration(SEC) and performance(SEP) of C factory samples between NIRS and known blending ratio were 0.97%, 1.93% for CT, 0.50%, 1.12 % for ES and 0.68%, 1.10% for ECT, respectively. The SEP of CT, ES and ECT of Band D factory samples determined by C factory calibration equation were more inaccurate than those of C factory samples determined by C factory calibration equations. These results were caused by the difference of CT, ES and ECT spectra followed by each factory. The SEP of CT, ES and ECT of Band D factories determined by calibration equations derived from each factory samples were more accurate than those of determined by calibration equation derived from C factory samples. Each factory SEP of CT, ES and ECT determined by calibration equation derived from all calibration samples(B+C+D factory) was similar to that determined by calibration equation derived from each factory samples. To improve the analytical inaccuracy caused by spectra difference, we need to apply a specific calibration equation for each factory sample. Data in development of specific calibrations between sample and NIRS spectra might supply a method for rapid determination of blending ratio of CT, ES, and ECT.

• Korea Journal of Hospital Management
• /
• v.9 no.2
• /
• pp.102-127
• /
• 2004

The objective of this study is to analyze a current trend of and relating factors on profitability of the Korean Public Corporation Medical Centers(KPCMCs, hereinafter, hospitals) in Korea. There are 34 hospitals in Korea as of 2004. Among these hospitals some are red ink hospitals, others are black inks in terms of profitability. Data were collected by Korea Health Industry Development Institute(KHIDI) Statistics for Hospital Management 2000-2002 and Ministry of Health and Welfare(MOHW) financial data of public hospitals which was planned to coordinate public health care services roadmap in the long run. The samples are 32 hospitals. Profitability was measured in the aspect of profit rate with normal profit to total assets, and normal profit to gross revenues as dependent variables in respective. Independent variables were classified by general factors, i.e., location, intern/resident training, period of opening, number of beds, and managerial factors(current ratio, fixed ratio, liability to total assets, total assets turnover, personnel costs, materials cost, administrative cost), and finally factors related to patient treatment(average length of stay, bed occupancy rate, admission ratio of outpatients). The methods of analysis are correlation and multiple regression analysis. This study shows firstly, a lot of hospitals are optimal current ratio. Hospitals in upper 100% current ratio are 81.2%. And the personnel cost in total costs are high. Secondly, the trend of normal profit to gross revenues of hospitals are deteriorating gradually. And lastly, as a result of multiple regression analysis, the factors had on significant effect on normal profit to total assets are fixed ratio(+), liability to total assets(-), bed occupancy rate(+), admissions of outpatients(+), etc. And the factors had on significant effect on normal profit to gross revenues are current ration(+), fixed ratio(+), personnel cost(-), administrative expenses(-), admissions of outpatients(+), etc. In conclusion, to improve the profitability of hospitals, the efforts to reduce personnel cost and average length of stay might be needed. And also beds utilization rate need to be increased.

• Journal of Biosystems Engineering
• /
• v.43 no.4
• /
• pp.320-330
• /
• 2018

Purpose: The aim of this study was to investigate the harvesting performance of a prototype small combine for buckwheat and adlay. Methods: The prototype small combine was designed and constructed. Its ratio of grain loss, ratio of output components in the grain outlet, and field capacity for harvesting buckwheat and adlay were analyzed through field tests. Results: The prototype small combine required a working width of about 0.6 to 0.7 m to harvest buckwheat. The maximum travel speed was about 0.36 m/. The total ratio of grain loss was about 21.6%, which consisted of 8.8% at the header and 12.8% at the dust outlet. The grain and the material other than grain (MOG) ratios at the grain outlet were 94.1% and 5.9% respectively. In the case of adlay harvest, the maximum working width was about 1.2 m, that is, two rows. The range of maximum travel speed was about 0.45 to 0.46 m/s. When adlay was harvested in one row, the total ratio of grain loss ranged from 36.3 to 42.8% according to the cutting height. The cutting height of 30 cm resulted in a higher total ratio of grain loss than 60 cm and 90 cm. When the cutting height was 60 cm, there was no significant change in the total ratio of grain loss according to the number of working rows and the stage of the primary transmission shift. The total ratio of grain loss ranged from 35.2 to 37.7%. The grain and the MOG ratios at the grain outlet ranged from 93.1 to 95.8% and from 4.2 to 6.9%, respectively. No significant difference was observed in relation to cutting height, number of working rows, and the stage of the primary transmission shift. Conclusions: The prototype small combine for harvesting miscellaneous cereal crops showed good potential for the efficient harvesting of buckwheat and adlay. However, to improve the harvesting performance, there seems to be a need to develop new crop varieties suitable for machine-based harvesting and improve the transmissions, reels, separation/cleaning systems.

• Land and Housing Review
• /
• v.5 no.4
• /
• pp.247-257
• /
• 2014

This study proposes a new housing need and demand assessment model centering on small-scale housing development projects and happy house development projects that reflected the recent changes in rental and small sized apartment centered public housing policies and development paradigms. The housing need and demand assessment model of public housing development projects consists of quantitative evaluation factors such as potential need indicator and demand pressure indicator and qualitative evaluation factors such as local condition indicator. The potential need indicators of small sized housing development projects are calculated by subtracting the stock of already-supplied constructed rental and purchased rental housings from the potential quantity of need drawn from the small regions such as -eup, -myeon, and -dong. In the potential need indicators of happy house development projects, the potential need is calculated from those who are expected to receive a happy house in the unit of -si, -gun, and -gu. In small-sized housing development projects, demand pressure indictors are the number and the proportion of those who opened a subscription deposit, the number of those who received basic livelihood security and the number of those who were patriots and veterans. The demand pressure indicators of the happy house development projects are stock ratio of small-sized houses, rate of rise in housing rent price, level of housing rent price, and rate of monthly rent house.