• Journal of Acupuncture Research
• /
• v.15 no.2
• /
• pp.383-392
• /
• 1998

Osteoporosis is the most common metabolic disease of the bone, and constitutes one of the most important major pubulic health problems world wide. Therefore, in order to be helped early diagnosis, treatment and prevention of osteoporosis, measurement of Bone Mineral Density (BMD) is to be needed. Authors has analysed Bone Mineral Density (BMD) of 480 normal adults who visited woo suk unoversity Oriental Meclical Center from April 1998 to July 1998. The aims of this study is to investigate correlation between Bone Mineral Density (BMD) and age distribution, to examine the correlation between Bone Mineral Density (BMD) and Obesity. The results were as follows. 1. In distribution of age, the peak bone density of lumbar spine was noted around 30 years, and the peak bone density of the femoral neck was noted around 20 years. The age related loss of bone density follows soon after peak density. And the signifficant difference was revealed between lumbar spine and femoral neck bone density (p<0.001) 2. In distribution of sex, the bone density in male was signifficantly higher than in female (p<0.001). 3. In the correlation between Bone Mineral Density (BMD) and Obesity, Bone Mineral Density (BMD) in obese group was signifficantly higher than in non-obese group. Especially, in female from 50 up to 69 years, BMD had a positive correlation with Body mass index(BMI).

• Journal of Dental Rehabilitation and Applied Science
• /
• v.21 no.2
• /
• pp.169-182
• /
• 2005

The purpose of this study was to compare the stress distribution around the surrounding bone according to the splinted and non-splinted conditions on the finite element models of the two implant crowns with the different vertical bone level. The finite element model was designed with the parallel placement of the two fixtures ($4.0mm{\times}11.5mm$) with reverse buttress thread on the mandibular 1st and 2nd molars. As the bone quality, the inner cancellous bone and the outer 2 mm cortical bone were designed, and the cortical and cancellous bone were assumed to be perfectly bonded to the implant fixture. The splinted model(Model 1) had 2 mm contact surface and the non-splinted model(Model 2) had $8{\mu}m$ gap between two implant crowns. Two group (Splinted and non-splinted) was loaded with 200 N magnitude in the vertical and oblique directions on the loading point position on the central position of the crown, the 2 mm and 4 mm buccal offset point from the central position. Von Mises stress value was recorded and compared in the fixture-bone interface in the bucco-lingual and mesio-distal sections. The results were as follows; 1. In the vertical loading condition of central position, the stress was distributed on the cortical bone and the cancellous bone around the thread of the fixture in the splinted and non-splinted models. In the oblique loading condition, the stress was concentrated toward the cortical bone of the fixture neck, and the neck portion of 2nd molar in the non-splinted model was concentrated higher than that of 1st molar compared to the splinted model. 2. In the 2 mm buccal offset position of the vertical loading compared to the central vertical loading, stress pattern was shifted from apical third portion of the fixture to upper third portion of that. In the oblique loading condition, the stress was distributed over the fixture-bone interface. 3. In the 4 mm buccal offset position of the vertical loading, stress pattern was concentrated on the cortical bone around the buccal side of the fixture thread and shifted from apical third portion of the fixture to upper third portion of that in the splinted and non-splinted models. In the oblique loading, stresses pattern was distributed to the outer position of the neck portion of the fixture thread on the mesio-distal section in the splinted and non-splinted models. Above the results, it was concluded that the direction of loading condition was a key factor to effect the pattern and magnitude of stress over the surrounding bone of the fixture under the vertical and oblique loading conditions, although the type with or without proximal contact did not effect to the stress distribution.

• Journal of Radiation Industry
• /
• v.12 no.4
• /
• pp.311-316
• /
• 2018

Average life expectancy is getting longer due to medical developments and improvements in living standards. So much so that the elderly have an increased risk of developing osteoporosis. Therefore, it is important to prevent, diagnose, and treat the senile disease at an early stage through a bone density test. Bone density is measured by dual energy X-ray absorption (DXA). In this study, while using DXA, in cases when the measurements for both the lumbar and the femur could not be taken simultaneously, the correlation between both measurements were known, and the measurement of one area was used to make a clinical inference for the value of the other. Measurements were taken using Lunar Prodigy Advance (GE) for 43 participant with clinically significant fractures. Statistical calculations were produced and analysed regarding bone density. In case of T-score, lumbar spine produced a statistical result of $-2.112{\pm}1.836$ and femur neck was $-1.716{\pm}1.565$. In case of Z-score lumbar spine produced a statistical result of $-0.151{\pm}1.513$, and femur neck $-0.026{\pm}1.283$. It is indicated that the pearson correlation coefficient of T-score between lumbar spine and femur neck is high at 0.699, and the pearson correlation coefficient of Z-score is considered relatively high at 0.503. The correlation of bone density between lumbar spine and femur neck is shown to be statistically meaningful in T-score's p-value at 0.000 and Z-score's p-value at 0.001. In conclusion, it seems to have clinical usefulness that we can infer the result of one measurement through that of the other part tested, based on the knowledge of the correlation coefficients between lumbar spine and femur neck.

• Korean Journal of Community Nutrition
• /
• v.18 no.2
• /
• pp.177-186
• /
• 2013

The purpose of this study was to investigate factors associated with Bone Mineral Density (BMD) in Korean postmenopausal women. The data from 2008-2010 Korean National Health and Nutrition Examination Survey (KNHANES) were used for data analysis. Subjects were 2,701 postmenopausal women aged ${\geq}50$ years. BMDs at whole body, total femur, femoral neck, and lumbar spine were measured by Dual-energy X-ray absorptiometry (DXA). Dietary data from 24-hour dietary recall and a food frequency questionnaire containing 63 food items were used. The proportions of osteopenia at total femur, femoral neck, and lumbar spine were 37.4%, 54.5%, and 45.4%, respectively. The proportions of osteoporosis at total femur, femoral neck, and lumbar spine were 6.2%, 25.6%, and 34.3%, respectively. Age, anthropometric index including height, weight, and Body Mass Index (BMI), parathyroid hormone, and physical activity were related to BMD, but the relationships were site specific. Total femur BMD was explained by age, weight, parathyroid hormone and intakes of carbohydrate and fruits. Femoral neck BMD was related to age, weight, parathyroid hormone and intakes of riboflavin and fruits. Lumbar spine BMD was associated with age, weight, milk and dairy products, calcium intake, and exercise. These results indicated that adequate intakes of milk and dairy products, fruits, carbohydrate, calcium, riboflavin and exercise as well as weight maintenance might play an important role in maintaining optimum bone health in Korean postmenopausal women.

• The Journal of Korean Obstetrics and Gynecology
• /
• v.19 no.1
• /
• pp.188-201
• /
• 2006

Purpose : This study was conducted to investigate the effect of pregnancy and parity on bone marrow density using Dual Energy X-ray Absorptiometry (DXA) after parturition Methods : The observation cases who was over 20 and under 35 years old just after childbirth were admitted twice to woosuk university hospital from Aug 2000 to July 2005. During the first admission period, we measured the bone marrow density(BMD) using DXA in 13th day, and when the patient came to the hospital just after childbirth again, we followed up the BMD in 13th day. The evaluation index of this report was comparison of the T-score which was about the lumbar spine(L1-L4) BMD and femur neck BMD. Results : The continuous parturition was increased the lumbar spine BMD(P<<0.05), and decreased the femur neck BMD but it had no meaning. In the cases of the parturition interval under 24 months regarded as siblings born within a year of each other, the analysis results of BMD showed increase in lumbar spine BMD. In the cases of the parturition interval over 24 months, there was increased in lumbar BMD, and decreased in femur neck BMD. To the analysis of the weight variation, the increased BMI group has a significant increase in lumbar spine BMD, and the decreased BMI group also increase in lumbar spine BMD but there was no meaning about that. Conclusion : The continuous parturition was increased the lumbar spine BMD.

• Korean Journal of Otorhinolaryngology-Head and Neck Surgery
• /
• v.55 no.5
• /
• pp.301-303
• /
• 2012

Reports of ingested foreign bodies migrating to the neck are rare. We encountered a case of fish bone that migrated out of the upper digestive tract to the thyroid gland. This foreign body was identified by computed tomography and ultrasonography about two weeks after onset, and successfully removed via neck exploration and the patient recovered well.

• Korean Journal of Head & Neck Oncology
• /
• v.1 no.1
• /
• pp.35-61
• /
• 1985

The surgical treatment of advanced carcinomas and some benign tumors having clinically malignant behaviors of the head and neck region often require extensive resection, necessitating large flaps for reconstruction. Since the original upper arm flap was described by Tagliacozzi in 1597, a variety of technique such as random pattern local flap, axial flap, distant flap, scalping flap, myocutaneous flap, free flap etc. have been proposed for reconstruction of head, face and neck defects. Reconstruction of the facial defects usually require the use of distant tissue. Traditionally, nasal reconstruction has been carried out with a variety of forehead flaps. In recent years, there has been more acceptance of immediate repairs following the removal of these tumors. As a result, patients are more willing to undergo these extensive resections to improve their chances of cure, with the reasonable expectation that an immediate reconstruction will provide an adequate cosmetic result. Authors experienced 13 cases of head and neck tumor during last three and half years that required wide excision and immediate reconstruction with various flaps, not with primary closure or simple skin graft. We present our experience with varied flaps for reconstruction after wide resection of head and neck tumors 3 cases of defect of dorsum of nose or medial canthus with island forehead flaps, lower eyelid defect with cheek flap, cheek defect with Limberg flap, orbital floor defect with Temporalis muscle flap, lateral neck defects with Pectoralis major myocutaneous flap or Latissimus dorsi myocutaneous free flap, subtotal nose defect with scalping flap, wide forehead defect with Dorsalis pedis free flap and 3 cases of mandibular defect or mandibular defect combined with lower lip defect were reconstructed with free vascularized iliac bone graft or free vascularized iliac bone graft concomitantly combined with free groin flap pedicled on deep circumflex iliac vessels We obtained satisfactory results coincided wi th goal of treatment of head and neck tumors, MAXIMAL CURE RATE with MINIMAL MORBIDITY, OPTIMAL FUNCTION, and an APPEARANCE as close to normal as possible.

• Journal of Audiology & Otology
• /
• v.24 no.2
• /
• pp.79-84
• /
• 2020

Background and Objectives: Hearing can be elicited in response to vibratory stimuli delivered to fluid in the external auditory meatus. To obtain a complete audiogram in subjects with normal hearing in response to pure tone vibratory stimuli delivered to fluid applied to the external meatus. Subjects and Methods: Pure tone vibratory stimuli in the audiometric range from 0.25 to 6.0 kHz were delivered to fluid applied to the external meatus of eight participants with normal hearing (15 dB or better) using a rod attached to a standard clinical bone vibrator. The fluid thresholds obtained were compared to the air conduction (AC), bone conduction (BC; mastoid), and soft tissue conduction (STC; neck) thresholds in the same subjects. Results: Fluid stimulation thresholds were obtained at every frequency in each subject. The fluid and STC (neck) audiograms sloped down at higher frequencies, while the AC and BC audiograms were flat. It is likely that the fluid stimulation audiograms did not involve AC mechanisms or even, possibly, osseous BC mechanisms. Conclusions: The thresholds elicited in response to the fluid in the meatus likely reflect a form of STC and may result from excitation of the inner ear by the vibrations induced in the fluid. The sloping fluid audiograms may reflect transmission pathways that are less effective at higher frequencies.

• Korean Journal of Audiology
• /
• v.24 no.2
• /
• pp.79-84
• /
• 2020

Background and Objectives: Hearing can be elicited in response to vibratory stimuli delivered to fluid in the external auditory meatus. To obtain a complete audiogram in subjects with normal hearing in response to pure tone vibratory stimuli delivered to fluid applied to the external meatus. Subjects and Methods: Pure tone vibratory stimuli in the audiometric range from 0.25 to 6.0 kHz were delivered to fluid applied to the external meatus of eight participants with normal hearing (15 dB or better) using a rod attached to a standard clinical bone vibrator. The fluid thresholds obtained were compared to the air conduction (AC), bone conduction (BC; mastoid), and soft tissue conduction (STC; neck) thresholds in the same subjects. Results: Fluid stimulation thresholds were obtained at every frequency in each subject. The fluid and STC (neck) audiograms sloped down at higher frequencies, while the AC and BC audiograms were flat. It is likely that the fluid stimulation audiograms did not involve AC mechanisms or even, possibly, osseous BC mechanisms. Conclusions: The thresholds elicited in response to the fluid in the meatus likely reflect a form of STC and may result from excitation of the inner ear by the vibrations induced in the fluid. The sloping fluid audiograms may reflect transmission pathways that are less effective at higher frequencies.

• Archives of Plastic Surgery
• /
• v.43 no.4
• /
• pp.374-378
• /
• 2016

Submandibular gland ptosis is a common impediment to obtaining superior surgical aesthetic results in neck lift surgery. Techniques for suspending the submandibular gland have been proposed, but these procedures have the drawbacks of disturbing the floor of the mouth mucosa and periosteum. We present an approach of submandibular gland suspension for the treatment of gland ptosis by employing a platysma and hyoid bone fascia cradle. Our technique was performed on cadaveric models. The platysma muscle and hyoid bone cradle for submandibular gland ptosis was created on the left side of the neck in two cadavers. A submental incision with sharp dissection was performed to raise a supraplatysmal flap. A subplatysmal plane was developed until the submandibular gland was identified. Sutures were used to pexy the platysma to the hyoid bone periosteum and deep cervical fascia, tightening the overlying muscle and in turn elevating the submandibular gland. Submandibular gland ptosis must be corrected in order to achieve exemplary aesthetic results. Our approach of creating a cradle with the platysma and hyoid bone avoids the potential complications of previously described sling procedures, while still maintaining the integrity of the gland and surrounding tissues.