• 제목/요약/키워드: Near-field Measurement

검색결과 350건 처리시간 0.026초

Derivation of Analytic Formulas and Numerical Verification of Weakly Singular Integrals for Near-Field Correction in Surface Integral Equations

  • Rim, Jae-Won;Koh, Il-Suek
    • Journal of electromagnetic engineering and science
    • /
    • 제17권2호
    • /
    • pp.91-97
    • /
    • 2017
  • An accurate and efficient evaluation for hypersingular integrals (HIs), strongly singular integrals (SSIs), and weakly singular integrals (WSIs) plays an essential role in the numerical solutions of 3D electromagnetic scattering problems. We derive analytic formulas for WSIs based on Stokes' theorem, which can be expressed in elementary functions. Several numerical examples are presented to validate these analytic formulas. Then, to show the feasibility of the proposed formulations for numerical methods, these formulations are used with the existing analytical expressions of HIs and SSIs to correct the near-field interaction in an iterative physical optics (IPO) scheme. Using IPO, the scattering caused by a dihedral reflector is analyzed and compared with the results of the method of moments and measurement data.

근접장 마이크로파 현미경을 이용한 ITO 박막 면저항의 비파괴 관측 특성 연구 (Nondestructive measurement of sheet resistance of indium tin oxide(ITO) thin films by using a near-field scanning microwave microscope)

  • 윤순일;나승욱;유현준;이영주;김현정;이기진
    • 한국전기전자재료학회:학술대회논문집
    • /
    • 한국전기전자재료학회 2004년도 하계학술대회 논문집 Vol.5 No.2
    • /
    • pp.1042-1045
    • /
    • 2004
  • ITO thin films ($\sim150nm$) are deposited on glass substrates by different deposition condition. The sheet resistance of ITO thin films measured by using a four probe station. The microstructure of these films is determined using a X-ray diffractometer (XRD) and a scanning electron microscope (SEM) and a atomic force microscope (AEM). The sheet resistance of ITO thin films compared $s_11$ values by using a near field scanning microwave microscope.

  • PDF

微小圓形格子變形率 測定法을 利용한 龜裂先端의 局所疲勞變形率分布 (The Local Fatigue Strain Distribution Near a Crack Tip by Using Fine Dot Grid Strain Measurement Method)

  • 박영철;오세욱;김광영
    • 대한기계학회논문집
    • /
    • 제15권1호
    • /
    • pp.209-217
    • /
    • 1991
  • 본 연구에서는 이러한 제반 문제점들을 보완하여 피로균열 선단의 국소영역에 서의 변형율상태를 실시간적으로 정도 높게 측정할 수 있는 새로운 변형율측정법인 미 소원형격자변형율측정법(fine dot grid strain measurement method)을 이용하였다. 그 결과, 균열선단의 국소영역에서의 피로변형율상태를 명확히 밝혀냄은 물론 이를 기 초로 하여 국소피로변형율장을 대표할 수 있는 피로변형율확대계수 .DELTA.A를 제안하였으 며 그 유효성에 대하여 명백히 하였다.

외삽기법을 이용한 안테나의 원 ${\cdot}$ 근역장 절대이득 측정시스템 개발 (Development of the Near/Far Absolute Gain Measurement System Using an Extrapolation Technique)

  • 신준;강찬구;김정환;정낙삼
    • 대한전자공학회논문지
    • /
    • 제27권2호
    • /
    • pp.31-38
    • /
    • 1990
  • 외삽기법을 시용하여 실내의 소형 안테나 레이지에서 안테나 이득을 측정할 수 있는 시스템을 개발하였다. 외삽기법은 안테나의 절대이득 측정에 보통 사용되는 2-안테나 방법과 유사한데 가까운거리 구간에서 수신되는 신호의 크기를 거리의 함수로 연속적으로 측정한 후 외삽법을 사용한 신호처리로 무한거리에서 수신되는 신호의 크기를 계산함으로써 안테나의 원역장 이득을 구할 수 있다. 또한 원역장 이득과 근역보정인자를 결합하여 근역장 이득을 안테나로부터의 거리의 함수로 구하는 것도 가능하다. 이 외삽기법을 사용하여 측정한 표준이득 혼 안테나와 OEC 안테나의 이득 측정결과를 고찰하였다.

  • PDF

모노펄스 정확도를 위한 능동배열위상레이다의 근접전계 수신시험 표본 주파수 채널 선택에 대한 연구 (A Study on Sample Frequency Channel Selection of Near-Field Receiving Measurement for the Active Phased Array Antenna for Mono-Pulse Accuracy)

  • 권용욱;윤재복;유우성;장헌순;김도열
    • 한국전자파학회논문지
    • /
    • 제28권4호
    • /
    • pp.318-327
    • /
    • 2017
  • 능동위상배열안테나는 정밀한 빔의 형성과 성능 확인을 위해 근접전계 수신시험이 요구된다. 그에 따른 근접전계 수신시험을 통해 모노펄스 기능을 활용하기 위한 보상값을 획득하게 된다. 하지만, 많은 주파수 채널을 사용하는 레이다의 경우 많은 시간과 노력이 요구된다. 효율적인 레이다 개발과 생산을 위해서는 선택적으로 주파수 채널을 선정하고, 그 측정값을 기준으로 측정하지 않은 주파수 채널의 보상값을 보간법을 통해 예측하여 획득할 수 있다. 이와 같은 방법으로 보상값의 위상각 정보를 획득할 경우, 합, 차 채널간의 위상변화량을 확인할 필요성이 있다. 위상의 측정은 랩핑으로 인하여 비선형 현상이 나타날 수 있기 때문이다. 일반적인 레이다의 경우, 합, 차 채널의 전기적 길이가 유사하게 설계되지만, 특정 목적으로 전기적 길이 차이가 발생할 경우, 랩핑 현상으로 인해 보간법의 오류를 발생할 수 있다. 본 논문에서는 전기적 길이 차이에 의해 발생되는 보간법의 오류를 확인하고, 하나의 주파수 선택 방안을 제시한다.

초전도 특성평가장치용 고온 초전도 마그네트의 개념 설계 (The Conceptual Design of High-Tc superconducting Magnet for a Superconducting Property Measurement System)

  • 최석진;이세연;배준한;손명환;김우석;박찬;이지광;이상진;최경달
    • 한국초전도ㆍ저온공학회논문지
    • /
    • 제11권1호
    • /
    • pp.20-24
    • /
    • 2009
  • The superconducting property measurement system is used to acquire electrical and thermal properties on short HTS tape samples and the system is composed of specimen holder for mounting HTS tape and a magnet for applying magnetic fields externally. The magnet consists of two split racetrack windings and is designed to produce maximum 3T of center field. The temperature of specimen holder can be varied in range from 10K to 77K. The field homogeneity is required less than 300 gauss stray field contour within 20cm axially and 3cm radially from origin. We have worked on the conceptual designs of the conduction-cooled magnet for the superconducting characteristic measurement system. The measurement system will be fabricated in near future based on the design parameters presented in this paper.

송전철탑 주변에서 전장과 자장의 측정과 분석 (Measurement and Analysis of Electric and Magnetic Fields near a Transmission Tower)

  • 이복희;길형준;안창환;이경옥;박동화;곽희로
    • 대한전기학회:학술대회논문집
    • /
    • 대한전기학회 1997년도 하계학술대회 논문집 E
    • /
    • pp.1827-1829
    • /
    • 1997
  • In this paper, measurement and analysis of ELF electric and magnetic fields due to a transmission line have been carried out and the power frequency field strength measuring system is designed. In order to evaluate electric and magnetic fields associated with 60 Hz electric power transmission and distribution lines, the actual survey near a transmission tower has been made and analyzed. It may be inferred from these results that the maximum electric and magnetic fields strength in the vicinity of a line tower do not exceed 3.5[kV/m] and 20[${\mu}T$]. The results of the field measurements agree with limits and guidelines recommended by various authorized international institutes.

  • PDF

프레넬영역 안테나 측정법의 파리미터 분석과 측정 가이드라인 제시 (Parametric Analysis and Measurement Guideline of Fresnel Region Antenna Measurement Method)

  • 오순수
    • 대한전자공학회:학술대회논문집
    • /
    • 대한전자공학회 2008년도 하계종합학술대회
    • /
    • pp.351-352
    • /
    • 2008
  • In this paper, parametric analysis of Fresnel region antenna measurement method has been performed for the square aperture having the uniformly distributed current. The optimum number of Fresnel region field and the tolerable distance between two antennas have been guided. This parametric analysis could be fully utilized when performing Fresnel region antenna measurement method. Other types of current distribution and aperture shape will be investigated in the near future

  • PDF

2차원 구조물의 진동 인텐시티 계측에 대한 연구 (A Study on Structural Intensity Measurement of 2-dimensional Structure)

  • 이덕영;박성태
    • 소음진동
    • /
    • 제7권3호
    • /
    • pp.477-488
    • /
    • 1997
  • In order to control vibration in structures, it is desirable to be able to identify dominant paths of vibration transmission from sources through the structure to some points of interest. Structural intensity vector(power flow per width of cross section) using cross spectra is able to measure the vibration power flow at a point in a structure. This paper describes the structural intensity measurement of 2-dimensional structure. Structural intensity of 2-dimensional structure can be obtained from eight point cross spectral measurement per axis, or two point measurement per axis on the assumption of far field. Approximate formulation of the relation between bending waves in structures and structural intensity makes it possible to separate the wave components by which one can get a state of the vibration field. Experimental results are obtained on an infinite plate at the near and far field in flexural vibration. The measurement error of two point measurement is rather bigger than eight point measurement on account of the assumption that Poisson's ratio is 1. The structural intensity vectors on the plate are checked the ability to identify the path of vibration power flow in random excitation and 200Hz sine excitation, the result of two point measurememt is almost the same as the result of eight point measurement in 200Hz sine excitation.

  • PDF