• Proceedings of the KIEE Conference
• /
• 1993.11a
• /
• pp.359-361
• /
• 1993

The force exerted on particles when the momentum of light is changed at the boundary is used in accelerating particles in the fluid. So far, particles are accelerated by the gaussian beam focused by lenses or microscopic objectives. In this paper, particles arc moved by the light diffracted from the fiber end. And we proposed the possibility of particle acceleration using the fiber end.

• Journal of electromagnetic engineering and science
• /
• v.11 no.3
• /
• pp.183-185
• /
• 2011

A multiple charging method for a wireless power transfer system (WPTS) in the near-field region is proposed. We analyzed the frequency characteristics of multiple receivers in the near-field region. The results suggested that the time division WPTS can achieve efficient and equal power transmission at multiple receivers. We conclude that this system has an advantage for charging multiple receivers.

• Bulletin of the Korean Chemical Society
• /
• v.7 no.4
• /
• pp.283-288
• /
• 1986

A nonlinear analysis is presented for the treatment of fluctuations near the critical point in the presence of diffusion in the Schlogl models. The two time scaling method is used to obtain an evolution equation for the amplitude of fluctuations. It is shown that the fluctuations decay to zero in the stable region and they are enhanced to a finite value as time goes to infinity in the unstable region.

• Journal of the Korean Wood Science and Technology
• /
• v.45 no.4
• /
• pp.399-408
• /
• 2017

Research on the rapid and accurate prediction of physical properties of wood using near-infrared (NIR) spectroscopy has attracted recent attention. In this study, partial least squares analysis was performed between NIR spectra and air-dried specific gravity of five domestic conifer species including larch (Larix kaempferi), Korean pine (Pinus koraiensis), red pine (Pinus densiflora), cedar (Cryptomeria japonica), and cypress (Chamaecyparis obtusa). Fifty different lumbers per species were purchased from the five National Forestry Cooperative Federations of Korea. The air-dried specific gravity of 100 knot- and defect-free specimens of each species was determined by NIR spectroscopy in the range of 680-2500 nm. Spectral data preprocessing including standard normal variate, detrend and forward first derivative (gap size = 8, smoothing = 8) were applied to all the NIR spectra of the specimens. Partial least squares analysis including cross-validation (five groups) was performed with the air-dried specific gravity and NIR spectra. When the performance of the regression model was expressed as $R^2$ (coefficient of determination) and root mean square error of calibration (RMSEC), $R^2$ and RMSEC were 0.63 and 0.027 for larch, 0.68 and 0.033 for Korean pine, 0.62 and 0.033 for red pine, 0.76 and 0.022 for cedar, and 0.79 and 0.027 for cypress, respectively. For the calibration model, which contained all species in this study, the $R^2$ was 0.75 and the RMSEC was 0.37.

• Journal of the Korean Wood Science and Technology
• /
• v.45 no.2
• /
• pp.202-212
• /
• 2017

This study was to establish the interrelation between chemical compositions and near infrared (NIR) spectra for the classification on distinguishability of domestic gymnosperms. Traditional wet chemistry methods and infrared spectral analyses were performed. In chemical compositions of five softwood species including larch (Larix kaempferi), red pine (Pinus densiflora), Korean pine (Pinus koraiensis), cypress (Chamaecyparis obtusa), and cedar (Cryptomeria japonica), their extractives and lignin contents provided the major information for distinction between the wood species. However, depending on the production region and purchasing time of woods, chemical compositions were different even though in same species. Especially, red pine harvested from Naju showed the highest extractive content about 16.3%, whereas that from Donghae showed about 5.0%. These results were expected due to different environmental conditions such as sunshine amount, nutrients and moisture contents, and these phenomena were also observed in other species. As a result of the principal component analysis (PCA) using NIR between five species (total 19 samples), the samples were divided into three groups in the score plot based on principal component (PC) 1 and principal component (PC) 2; group 1) red pine and Korean pine, group 2) larch, and group 3) cypress and cedar. Based on the chemical composition results, it was concluded that extractive content was highly relevant to wood classification by NIR analysis.

• Archives of Craniofacial Surgery
• /
• v.21 no.5
• /
• pp.301-304
• /
• 2020

Orthognathic surgeries often utilize rigid fixation for stabilization of the osteotomy site. The longterm fate of rigid fixations is still under investigation, and whether they should be routinely removed is under debate despite their low complication rates. Here, we report a case where a 26-year-old man suffered high-velocity trauma to his face 7 years after a two-jaw surgery. Computed tomography examination revealed a zygomaticomaxillary complex fracture, and open reduction and internal fixation was performed along with anterior maxillary wall reconstruction using absorbable mesh. Intraoperative examination revealed a broken L-shaped titanium plate near the fracture site with multiple bony fragments near each titanium screw. The rigid titanium system may have caused comminution of the fracture pattern, worsening the severity of the fracture.

• The Journal of The Korea Institute of Intelligent Transport Systems
• /
• v.15 no.6
• /
• pp.62-70
• /
• 2016

Increased bus traffic leads inefficiency at near-side bus stops in median exclusive bus lane because buses are waiting for a signal does not have a vehicle arrived. This study suggests a method for estimating a proper spacing between bus stops and signalized intersection to prevent the inefficiency. We modified the Poisson model for a proper spacing by using both dwell time and waiting time of signal instead of using dwell time only. The waiting time of signal changes by spacing and it was measured using micro simulation program. The iterative algorithm using the change of waiting time of signal was also suggested. By applying the proposed method, measure waiting time by simulation and iterative algorithm, the spacing of near-side bus stops, proper spacing is suggested according to flow rate level.

• Journal of The Korean Astronomical Society
• /
• v.46 no.6
• /
• pp.253-259
• /
• 2013

We present near-infrared light curves of HBC 722 after its the September 2010 outburst. We have been monitoring its near-infrared light curves since November 2010 with Korean Astronomy and Space Science Institute Infrared Camera System (KASINICS). HBC 722 exhibits large changes in optical and near-infrared brightness since its outburst. The J, H, and $K_s$ light curves over about 2.5 years show that in all observed bands HBC 722 progressively became fainter until around April 2011, down to J ~10.7, H ~9.9, $K_s$ ~9.3, but it is getting brighter again. Large scatter in the obtained light curve prevents us from finding whether there is any short timescale variation as reported in other optical observations. The near-infrared color of HBC 722 is becoming bluer since its outburst. The pre-outburst Spectral Energy Distribution (SED) of HBC 722 is consistent with that of a slightly reddened Class II YSO with the exception of the extraordinary IR-excess in the far-infrared region.

• Transactions of the Korean Society of Mechanical Engineers A
• /
• v.37 no.5
• /
• pp.609-617
• /
• 2013

This paper presents a near-minimum time path planning algorithm for autonomous driving. The problem of near-minimum time path planning is an optimization problem in which it is necessary to take into account not only the geometry of the circuit but also the dynamics of the vehicle. The path planning algorithm consists of a candidate path generation and a velocity optimization algorithm. The candidate path generation algorithm calculates the compromises between the shortest path and the path that allows the highest speeds to be achieved. The velocity optimization algorithm calculates the lap time of each candidate considering the vehicle driving performance and tire friction limit. By using the calculated path and velocity of each candidate, we calculate the lap times and search for a near-minimum time path. The proposed algorithm was evaluated via computer simulation using CarSim and Matlab/Simulink.

• The Korean Journal of Quaternary Research
• /
• v.4 no.1
• /
• pp.15-26
• /
• 1990

Narrow (10-20 km wide) and steep (0.3-$2.4^{\circ}$) continental shelf off the eastern coast of Korea is covered with terrigenous clastic sediments reflecting the Holocene fluctuation of sea level. Surface sediments on the inner shelf consist of muddy sand and sandy mud with some gravels near the coast. However, sand or muddy sand, shell fragments and well rounded gravels occur near the edge of continental shelf at the depth of about 130-l50m. The coarse sediments near the shelf edge seem to be the relict or palimpsest sediments deposited under the nearshore environment during the low-stand or sea level due to so-called the Wisconsinan glaciation. Distribution of recent sediments near the coast and the inner shelf may reflect the affect of waves and currents precluding the deposition of fine sediment near the coast and on the shallow portion of shelf. Eastern Korean Warm Current also nay have played an important role to the transport and distribution of fine sediments from the south.