DOI QR코드

DOI QR Code

Possibility of Wood Classification in Korean Softwood Species Using Near-infrared Spectroscopy Based on Their Chemical Compositions

  • Park, Se-Yeong (Department of Forest Sciences, College of Agriculture and Life Sciences, Seoul National University) ;
  • Kim, Jong-Chan (Department of Forest Sciences, College of Agriculture and Life Sciences, Seoul National University) ;
  • Kim, Jong-Hwa (Department of Forest Sciences, College of Agriculture and Life Sciences, Seoul National University) ;
  • Yang, Sang-Yun (Department of Forest Sciences, College of Agriculture and Life Sciences, Seoul National University) ;
  • Kwon, Ohkyung (Nanobioimaging Center, National Instrumentation Center for Environmental Management, Seoul National University) ;
  • Yeo, Hwanmyeong (Department of Forest Sciences, College of Agriculture and Life Sciences, Seoul National University) ;
  • Cho, Kyu-Chae (R&D, KC Tech In. Co. Ltd.) ;
  • Choi, In-Gyu (Department of Forest Sciences, College of Agriculture and Life Sciences, Seoul National University)
  • Received : 2017.02.14
  • Accepted : 2017.03.06
  • Published : 2017.03.25

Abstract

This study was to establish the interrelation between chemical compositions and near infrared (NIR) spectra for the classification on distinguishability of domestic gymnosperms. Traditional wet chemistry methods and infrared spectral analyses were performed. In chemical compositions of five softwood species including larch (Larix kaempferi), red pine (Pinus densiflora), Korean pine (Pinus koraiensis), cypress (Chamaecyparis obtusa), and cedar (Cryptomeria japonica), their extractives and lignin contents provided the major information for distinction between the wood species. However, depending on the production region and purchasing time of woods, chemical compositions were different even though in same species. Especially, red pine harvested from Naju showed the highest extractive content about 16.3%, whereas that from Donghae showed about 5.0%. These results were expected due to different environmental conditions such as sunshine amount, nutrients and moisture contents, and these phenomena were also observed in other species. As a result of the principal component analysis (PCA) using NIR between five species (total 19 samples), the samples were divided into three groups in the score plot based on principal component (PC) 1 and principal component (PC) 2; group 1) red pine and Korean pine, group 2) larch, and group 3) cypress and cedar. Based on the chemical composition results, it was concluded that extractive content was highly relevant to wood classification by NIR analysis.

Keywords

References

  1. Alves, A., Santos, A., Rozenberg, P., Pâques, L.E., Charpentier, J.-P., Schwanninger, M., Rodrigues, J. 2012. A common near infrared-based partial least squares regression model for the prediction of wood density of Pinus pinaster and Larix $\times$ eurolepis. Wood Science and Technology 46(1-3): 157-175. https://doi.org/10.1007/s00226-010-0383-x
  2. Axrup, L., Markides, K., Nilsson, T. 2000. Using miniature diode array NIR spectrometers for analysing wood chips and bark samples in motion. Journal of Chemometrics 14(5-6): 561-572. https://doi.org/10.1002/1099-128X(200009/12)14:5/6<561::AID-CEM608>3.0.CO;2-2
  3. Cho, N., Lee, J., Ahn, W. 1982. Studies on the characteristics of extractives in Japanese larch (Larix leptolepis Gorden) grown in Korea. Journal of Korean Wood Science and Technology 10(2): 12-21.
  4. Grabner, M., Müller, U., Gierlinger, N., Wimmer, R. 2005. Effects of heartwood extractives on mechanical properties of larch. IAWA Journal 26(2): 211-220. https://doi.org/10.1163/22941932-90000113
  5. Ishizuka, S., Sakai, Y., Tanaka-Oda, A. 2014. Quantifying lignin and holocellulose content in coniferous decayed wood using near-infrared reflectance spectroscopy. Journal of Forest Research 19(1): 233-237. https://doi.org/10.1007/s10310-012-0386-6
  6. Jang, S.-K., Jeong, H.-S., Hong, C.-Y., Kim, H.-Y., Ryu, G.-H., Yeo, H., Choi, J. W., Choi, I.-G. 2015. Changes of furfural and levulinic acid yield from small-diameter Quercus mongolica depending on dilute acid pretreatment conditions. Journal of the Korean Wood Science and Technology 43(6): 838-850. https://doi.org/10.5658/WOOD.2015.43.6.838
  7. Li, X., Sun, C., Zhou, B., He, Y. 2015. Determination of hemicellulose, cellulose and lignin in moso bamboo by near infrared spectroscopy. Scientific Report 5: 17210. https://doi.org/10.1038/srep17210
  8. McLean, J.P., Jin, G., Brennan, M., Nieuwoudt, M.K., Harris, P.J. 2014. Using NIR and ATR-FTIR spectroscopy to rapidly detect compression wood in Pinus radiata. Canadian Journal of Forest Research 44(7): 820-830. https://doi.org/10.1139/cjfr-2013-0329
  9. Park, S.-Y., Hong, C.-Y., Jeong, H.-S., Lee, S.-Y., Choi, J.W., Choi, I.-G. 2016. Improvement of lignin oil properties by combination of organic solvents and formic acid during supercritical depolymerization. Journal of Analytical and Applied Pyrolysis 121: 113-120. https://doi.org/10.1016/j.jaap.2016.07.011
  10. Sills, D.L., Gossett, J.M. 2012. Using FTIR to predict saccharification from enzymatic hydrolysis of alkali-pretreated biomasses. Biotechnology and Bioengineering 109(2): 353-362. https://doi.org/10.1002/bit.23314
  11. Schwanninger, M., Rodrigues, J.C., Fackler, K. 2011. A review of band assignments in near infrared spectra of wood and wood components. Journal of Near Infrared Spectroscopy 19(5): 287-308. https://doi.org/10.1255/jnirs.955
  12. Sluiter, A., Ruiz, R., Scarlata, C., Sluiter, J., Templeton, D. 2005. Determination of extractives in biomass. Laboratory Analytical Procedure. National Renewable Energy Laboratory, Golden, Co., USA.
  13. Sluiter, A., Hames, B., Ruiz, R., Scarlata, C., Sluiter, J., Templeton, D., Crocker, D. 2008. Determination of structural carbohydrates and lignin in biomass. Laboratory Analytical Procedure. National Renewable Energy Laboratory, Golden, Co., USA.
  14. Xu, F., Yu, J., Tesso, T., Dowell, F., Wang, D. 2013. Qualitative and quantitative analysis of lignocellulosic biomass using infrared techniques: A mini-review. Applied Energy 104: 801-809. https://doi.org/10.1016/j.apenergy.2012.12.019