• Proceedings of the Korean Institute of Navigation and Port Research Conference
• /
• 2016.05a
• /
• pp.62-63
• /
• 2016

A variety of sensors and equipment are installed on passenger ships. Data collection from these sensors and associated equipment is required for the safe navigation and behavior analysis of ships, but when the ship sails out of the area where it is not possible to use the LTE communication, other types of networks have to be able to support to transmit these information. such as AIS, satellite communication and MF/HF. In this paper, we survey data protocol of onboard sensors and design ASM messages to transfer sensor data on board to the shore-side system.

• Journal of Navigation and Port Research
• /
• v.44 no.2
• /
• pp.65-72
• /
• 2020

Mankind has been using ships for more than 5,000 years and has developed a range of related technologies. However, despite such a long history, compared to aircraft with a history of approximately one century, the pace of progress has been markedly slow. Even though technological progress of ships or the installation of various navigation equipment have been achieved, seaborne collisions have occurred quite frequently. This study analyzed the TCAS( Traffic Collision Avoidance System) that has contributed to the prevention of collisions with other transport methods including aircraft to suggest a collision avoidance system that can be deployed for ships. To apply the technologies applied to aircraft that move in 3D to ships that move in 2D, the difference in the operational environment between the two modes was analyzed to identify elements that need to be applied to ships. The suggested display of data on the collision prevention system is one that manipulates the augmented reality display device used in automobiles that over the past few years has undergone rapid development. Based on the presentation of technological elements that need to be considered when adopting the SCAS or the Seaborne Collision Avoidance System as suggested in this study, the authors hope to contribute to the prevention of collisions.

• Journal of Navigation and Port Research
• /
• v.47 no.2
• /
• pp.57-65
• /
• 2023

In 2017, the International Maritime Organization (IMO) adopted MSC.428 (98), which recommends establishing a cyber-risk management system in Ship Safety Management Systems (SMSs) from January 2021. The 27th International Association of Marine Aids to Navigation and Lighthouse Authorities (IALA) also discussed prioritizing cyber-security (cyber-risk management) in developing systems to support Maritime Autonomous Surface Ship (MASS) operations (IALA guideline on developments in maritime autonomous surface ships). In response to these international discussions, Korea initiated the Korea Autonomous Surface Ship technology development project (KASS project) in 2020. Korea has been carrying out detailed tasks for cybersecurity technology development since 2021. This paper outlines the basic concept of ship network security equipment for supporting MASS ship operation in detailed task of cybersecurity technology development and defines ship network security equipment interface for MASS ship applications.

• Journal of the Korean Society of Marine Environment & Safety
• /
• v.21 no.4
• /
• pp.381-388
• /
• 2015

Global Maritime Distress and Safety System (GMDSS) equipment and Electronic Chart Display & Information System (ECDIS) are typical equipment which help seafarers to obtain information for ship's safe navigation. In this study, a survey on using of GMDSS equipment and ECDIS was conducted on a total of 260 ship masters and crew who have been working on ocean-going vessels. The subjects were asked about the usage, and level and reason of satisfaction or dissatisfaction of GMDSS equipment and ECDIS, the leading navigational system from which they receive information. The survey showed that the third- and fourth-most frequently used equipment, MF/HF and INMARSAT (telex), were deemed to be the second- and third-most useless equipment. It means that the frequency of device usage is not proportionate to the level of navigational safety. Especially, 'ease of device use (42.3%)' and 'necessity of the provided information (50%)' were highlighted as factors increasing the level of satisfaction with the system. The survey result shows that ship safety cannot be realized by only adopting advanced systems, technology and services. It emphasizes the need to consider the level of 'accessibility and appropriateness of the information' and 'ease of device use'. Discussions implemented by the IMO on various policies and regulations are aimed at securing ship safety. In order to achieve the goal, such institutions should be validated by end-users and relevant studies should be conducted.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.22 no.5
• /
• pp.754-763
• /
• 2018

The maritime ICT-convergence equipment are essentially required to a type approval (TA) certification that needs environmental and functional tests, to install in vessel. The environmental test is to experiment the possession for required durabilities of the target device in maritime environment, and the functional test is to check the required functions of target equipment based on international standard. In Korea, the environmental testing facilities amount to 227 sites, but there is no functional testing facility. Because of this, we establish a function test facility for the maritime ICT-equipment. In this paper, we analyze and design the functional testing requirement and required interlocking simulators for digital interfaces and navigation communication equipment. We propose the 2-steps of functional testing procedures, which are single test and integration test, to improve the reliability of testing result. The single test is to examine own functions of the target device, and the integration test is to check harmonized operation with other navigation and communication devices.

• Proceedings of the Korean Institute of Navigation and Port Research Conference
• /
• 2000.11a
• /
• pp.131-142
• /
• 2000

Facility layout is the early stage of system design that requires a mid-term or long-term plan. Since improper facility layout might incur substantial logistics cost including material handling and re-installment costs, due consideration must be given to decisions on facility layout. Facility layout is concerned with low to arrange equipment necessary for production in a given space. Its objective is to minimize the sum of all the products of each equipment's amount of flow multiplied by distance. Facility layout also is related to the issue of NP-complete, i.e., calculated amounts exponentially increase with the increase of the number of equipment. This study discusses Hybrid GA developed, as an algorithm for facility layout, to solve the above-mentioned problems. The algorithm, which is designed to efficiently place equipment, automatically produces a horizontal passageway by the block, if a designer provides the width and length of the space to be handled. In addition, this study demonstrates the validity of the Algorithm by comparing with existing algorithms that have been developed. We present a Hybrid GA approach to the facility layout problem that improves on existing work in terms of solution quality and method. Experimental results show that the proposed algorithm is able to produce better solution quality and more practical layouts than the ones obtained by applying existing algorithms.

• Proceedings of the Korean Institute of Navigation and Port Research Conference
• /
• v.1
• /
• pp.339-344
• /
• 2006

Container terminals compete with other ones because of the continuous increase of container flows and the appearance of large-sized vessels. Major port equipment manufacturers are interested in the development of new conceptual equipment ot greatly increase the productivity. In this study, a two-phase procedure is suggested for selecting the optimal development alternatives, when there are various development alternatives for container cranes, typical equipment in ports. The first phase removes the alternatives that violate essential requirements and the second phase selects find alternatives by using AHP (Analytic Hierarchy Process). Finally and example applying the procedure is provided.

• Proceedings of the Korean Institute of Navigation and Port Research Conference
• /
• 2022.06a
• /
• pp.207-208
• /
• 2022

Recently, with the development of digital technology, new research cases which applied new technology were increased. Also, the related equipment and services are being developed in the industry. Before new equipment is developed and released, it must go through a verification process. In the maritime industry, equipment is verified through simulation tests or environmental tests on land. However, if only the test on land is conducted, verification data in the actual operating environment might be insufficient. In this paper, considerations are described in the development of an onboard demonstration scenario for verification in the operating environment.

• Journal of Navigation and Port Research
• /
• v.47 no.3
• /
• pp.128-133
• /
• 2023

In order for Aids to Navigation to provide sustainable services to users, it is possible when there is no Aids to Navigation accident. If an Aids to Navigation accident occurs, the manager should efficiently manage it to prevent the same accident. However, the current Aids to Navigation accident management only specifies the cause and type of the accident. There are no separate guidelines. Thus, the accident is recorded differently depending on the manager. Therefore, this study attempted to redefine Aids to Navigation accident. To this end, Aids to Navigation accidents that have occurred over the past 23 years (year 2000 to years 2022), IALA's Aids to Navigation information standard, S-201, and categories of accidents (traffic accidents and marine accidents) were analyzed. Causes of Aids to Navigation accidents were divided into internal and external causes. Accidents were divided into three types: Light tower accident, buoy accident, and equipment accident. By further subdividing primary items, the cause of accident was reestablished into 7 items such as mooring and bad weather and 11 items such as Light tower damage, buoy loss, and equipment breakdown. These research results can be used as basic data to provide future Aids to Navigation accident statistics.

• Journal of Positioning, Navigation, and Timing
• /
• v.7 no.3
• /
• pp.127-138
• /
• 2018

Spoofing attacks including meaconing can provide a bogus position to a victim GPS receiver, and those attacks are notably difficult to detect at the point of view on the receiver. Several countermeasure techniques have been studied to detect, classify, and cancel the spoofing signals. Based on the countermeasure techniques, we have developed an anti-spoofing equipment that detects and mitigates or eliminates the spoofing signal based on raw measurements. Although many anti-spoofing techniques have been studied in the literatures, the evaluation test system is not deeply studied to evaluate the anti-spoofing equipment, which includes detection, mitigation, and elimination of spoofing signals. Each study only has a specific test method to verify its anti-spoofing technique. In this paper, we propose the performance evaluation test system that includes both spoofing signal injection system and its injection scenario with the constraints of stand-alone anti-spoofing techniques. The spoofing signal injection scenario is designed to drive a victim GPS receiver that moves to a designed position, where the mitigation and elimination based anti-spoofing algorithms can be successively evaluated. We evaluate the developed anti-spoofing equipment and a commercial GPS receiver using our proposed performance evaluation test system. Although the commercial one is affected by the test system and moves to the designed position, the anti-spoofing equipment mitigates and eliminates the injected spoofing signals as planned. We evaluate the performance of anti-spoofing equipment on the position error of the circular error probability, while injecting spoofing signals.