• 제목/요약/키워드: Natural ester

검색결과 262건 처리시간 0.053초

말쥐치피 콜라겐의 효소적 수식 및 기능성 (The enzymatic modification and functionalities of filefish skin collagen)

  • 김세권;곽동채
    • Applied Biological Chemistry
    • /
    • 제34권3호
    • /
    • pp.265-272
    • /
    • 1991
  • 어류 가공시 부산물로 얻어지는 어피를 보다 효율적으로 이용할 목적으로 말쥐치피로부터 콜라겐을 추출한 후, 이에 소수성 잔기를 증가시키기 위하여 leucine alkyl ester를 도입하여 기능성 개량을 시도하였다. 말쥐치피 콜라겐 및 FSC-Leu-OCn의 콜라겐 함량, 아미노산 조성에 의한 소수성, 분자량, 용해도, 보수력, 분산성, 지방흡수력, 포말성, 유화성 등을 계면활성제인 Tween-60과 비교 검토한 결과, 어피 콜라겐에 leucine alkyl ester를 도입시킨 $FSC-Leu-OC_8$은 기능성 중 유화성 및 유화안정성이 매우 향상되어 유화제로 이용할 수 있을 것으로 본다.

  • PDF

식물성 절연유와 광유가 사용된 유입변압기의 온도분포 특성 (Analysis on the Temperature Distribution Characteristics of Insulating oil of Transformer Using the Vegetable oil and Mineral oil)

  • 안정식;심명섭;정중일;김남렬;허창수
    • 대한전기학회:학술대회논문집
    • /
    • 대한전기학회 2009년도 제40회 하계학술대회
    • /
    • pp.1215_1216
    • /
    • 2009
  • Most transformer use insulating and cooling fluids derived from petroleum crude oil, but mineral oil is some possibility of environmental pollution and fire with explosion. vegetable oil fluids extracted from seed has superior biodegradation and fire-resistant properties including an exceptionally high fire point enhancing fire safety. In this study, it is aimed at the practicality of substituting natural ester dielectric fluid for mineral oil in liquid insulation system of transformers. As a rise in coil winding temperature has a direct influence on transformer life time, it is important to evaluate the temperature rise of coil winding in vegetable oil in comparison with mineral oil. Three transformers for the test are designed with 10KVA, 13.2KV, one phase unit. The temperature are directly measured in insulating oil of these transformers with the two sorts of natural ester and mineral oil dielectric fluid respectively. Temperature of vegetable oil transformers was similar to temperature of mineral oil transformer in the same design at 80% load and above.

  • PDF

An NMR Study on Complexation of Cesium Ion by p-tert-Butylcalix[6]arene Ethyl Ester

  • Chung, Kee-Choo;Namgoong, Hyun;Lee, Jo-Woong
    • Bulletin of the Korean Chemical Society
    • /
    • 제25권5호
    • /
    • pp.609-616
    • /
    • 2004
  • Complexation of cesium ion by p-tert-butylcalix[6]arene ethyl ester was studied by NMR spectroscopy in nonpolar $CDCl_3$ and polar acetone-$d_6$ and the results were compared with each other. Analysis of temperature dependent $^1H$ spectra and titration curves reveals that both solvents result in a 1 : 1 cone-form complex with nonpolar $CDCl_3$yielding a more tightly bound one than acetone-$d_6$. Unexpectedly, at very low temperature, we have found that two phenyl ring proton peaks of equal intensity appear both in $CDCl_3$and in acetone-$d_6$ solution which gradually collapse and eventually coalesce into a single line as temperature is raised. This observation could be interpreted in terms of the chemical exchange through direct and/or indirect interconversion between two equivalent conformations possible the complex in both solvents over the temperature range observed. And broadening of $^{133}Cs$ (I = 7/2) nmr line with increasing temperature has also been observed, indicating the exchange of $^{133}Cs$ ion between the complex and the solvent. From numerical fitting of lineshape changes for one-dimensional $^1H$ and $^{133}Cs$ spectra, the exchange rate constants and other relevant parameters for this conformational interconversion and the complex-solvent exchange were deduced.

차세대 자동차 본넷용 친환경 경량화 자연섬유 복합재 구조 설계 (Structural Design of Light Weight Natural Fiber Composites for Next Generation Automobile Bonnet)

  • 박길수;공창덕;박현범
    • Composites Research
    • /
    • 제28권2호
    • /
    • pp.46-51
    • /
    • 2015
  • 본 연구에서는 차량용 본넷의 구조 설계 및 해석을 수행하였다. 구조 설계를 위해 아마/비닐 에스테르 복합재료가 적용되었다. 아마 섬유 복합재 본넷의 제조공법은 VARTML(Vacuum Assisted Resin Transfer Molding-Light) 제조공법이 적용하였다. VARTML 공법은 한쪽 면은 견고한 금형을 사용하고 다른 면은 진공과 함께 유연한 금형을 사용하여 압력차를 이용하여 내부에 적층된 섬유에 수지를 신속하게 함침 시켜 성형하는 방법이다. 아마/비닐 에스테르 패널로 부터 시편을 가공하여 재료의 기계적 물성치를 획득하기 위한 시편 시험을 수행하였다. 이를 기반으로 자동차 본넷의 구조 설계를 수행하였다.

Synthesis of Nonclassical Quinazolinone Antifolates as Thymidylate Synthase Inhibitors and Their Antitumor Activity In Vitro

  • Baek, Du-Jong;Kang, Tae-Beom;Kim, Hyun-Ju
    • Bulletin of the Korean Chemical Society
    • /
    • 제25권12호
    • /
    • pp.1898-1906
    • /
    • 2004
  • Nonclassical quinazolinone analogs I, II, and III, in which the glutamic acid moiety of the classical antifolates is substituted by phenylglycine, phenylalanine or aminobenzoic acid and their methyl esters, were synthesized and evaluated as lipophilic inhibitors of thymidylate synthase (TS). The target compounds were generally potent inhibitors of L. casei and human TS with $IC_{50}$ values within the narrow range of 0.2-10 ${\mu}$M and 0.003-0.03 ${\mu}$M, respectively. Further, most of the target compounds showed cytotoxicity against tumor cell lines of murine and human origin with $IC_{50}$ values of as low as 0.050 ${\mu}$M. Substitution of another hydroxyl or carboxylic acid/ester group at the phenyl ring further increased the potency of TS inhibition and cell growth inhibition. Most effective were compounds If and Ic in which extra carboxylic acid/ester was present at the phenyl ring with nanomolar $IC_{50}$ values of 0.0044 and 0.0093 ${\mu}$M against human TS and submicromolar cytotoxic growth inhibition against all four tumor cell lines.

VARTM 공법으로 제작된 자연섬유 복합재료의 기계적 특성 분석 (Investigation on Mechanical Properties of Natural-Fiber Composite Manufactured using VARTM Method)

  • 박현범
    • 항공우주시스템공학회지
    • /
    • 제10권3호
    • /
    • pp.59-62
    • /
    • 2016
  • In this study, an investigation was performed on the mechanical properties of the natural-fiber-composite structure. The specimen was manufactured using the Vacuum Assisted Resin Transfer Molding (VARTM) method. The flax-fiber materials were adopted for the natural fiber composite, and vinyl-ester resin was also adopted. After a manufactured specimen was obtained, a mechanical test was carried out. The mechanical properties of the experiment results were compared with those of the natural-composite data cited from a number of other references.

Rosmarinic Acid as a Tyrosinase Inhibitors from Salvia miltiorrhiza

  • Kang, Hye-Sook;Kim, Hyung-Rak;Byun, Dae-Seok;Park, Hye-Jin;Choi, Jae-Sue
    • Natural Product Sciences
    • /
    • 제10권2호
    • /
    • pp.80-84
    • /
    • 2004
  • Rosmarinic acid and its methyl ester, isolated from the ethyl acetate soluble fraction of the methanolic extract of Salvia miltiorrhiza Bunge (Labiatae), were found to inhibit the oxidation of L-tyrosine catalyzed by mushroom tyrosinase with the $IC_{50}$ values of 16.8 and $21.5\;{\mu}M$, respectively. It was comparable with kojic acid, a well-known tyrosinase inhibitor, with an $IC_{50}$ of $22.4\;{\mu}M$. The inhibitory kinetics analyzed by the Lineweaver-Burk plots, were found rosmarinic acid and its methyl ester to be competitive inhibitors with $K_i\;of\;2.4{\times}10^{-5}\;and\;1.5{\times}10^{-5}\;M$, respectively.

위성체용 복합재료 광학 탑재 구조물 설계 연구 (A study on the development of the composite optical bench design)

  • 김병선;김진봉;하종학;이주훈;김진희;김경원;김성훈;황도순;김동욱
    • 한국복합재료학회:학술대회논문집
    • /
    • 한국복합재료학회 2004년도 추계학술발표대회 논문집
    • /
    • pp.228-231
    • /
    • 2004
  • The optical bench was designed using composite material, M40J/Cyanate Ester. Mechanical tests, thermal tests were carried out for M40J and structural vibration FEM analysis was performed. From the experimental results, the material properties of M40J/Cyanate Ester were obtained in longitudinal and transverse directions. By applying the properties into FEM vibration analysis, a proper stacking sequence was proposed for the laminated facesheets, so that natural frequency of the platform structure satisfy the design specification.

  • PDF

Influence of water saturation on fracture toughness in woven natural fiber reinforced composites

  • Kim, Hyo-Jin;Seo, Do-Won
    • Advanced Composite Materials
    • /
    • 제16권2호
    • /
    • pp.83-94
    • /
    • 2007
  • Woven sisal textile fiber reinforced composites were used to evaluate fracture toughness, tensile and three-point bending. The water absorption testing of all specimens was repeated five times in this study. All specimens were immersed in pure water during 9 days at room temperature, and dried in 1 day at $50^{\circ}C$. Two kinds of polymer matrices such as epoxy and vinyl-ester were used. Fractured surfaces were taken to study the failure mechanism and fiber/matrix interfacial adhesion. It is shown that it can be enhanced to improve their mechanical performance to reveal the relationship between fracture toughness and water absorption fatigue according to different polymer matrices. Water uptake of the epoxy composites was found to increase with cycle times. Mechanical properties are dramatically affected by the water absorption cycles. Water-absorbed samples showed poor mechanical properties, such as lower values of maximum strength and extreme elongation. The $K_{IC}$ values demonstrated a decrease in inclination with increasing cyclic times of wetting and drying for the epoxy and vinyl-ester.

Chemical Constituents from the Fruits of Prunus mume

  • Jin, Qinghao;Lee, Chul;Lee, Jin-Woo;Lee, In-Sun;Lee, Mi-Kyeong;Jeon, Won-Kyung;Hwang, Bang-Yeon
    • Natural Product Sciences
    • /
    • 제18권3호
    • /
    • pp.200-203
    • /
    • 2012
  • The chromatographic separation of a methanol extract of Prunus mume (Rosaceae) led to the isolation of 5-hydroxymethyl-2-furaldehyde (1), 4-O-caffeoylquinic acid methyl ester (2), prunasin (3), 5-O-caffeoylquinic acid methyl ester (4), benzyl-O-${\beta}$-D-glucopyranoside (5), and liquiritigenin-7-O-${\beta}$-D-glucopyranoside (6). Their structures were determined by 1D, 2D-NMR and MS data analysis as well as by comparison of their data with the published values.