• 한국지반공학회:학술대회논문집
• /
• 한국지반공학회 2010년도 춘계 학술발표회
• /
• pp.717-721
• /
• 2010

Soil volume conversion factors are used for estimation of an excavated the soil volume which will be removed or added in levelling the ground surface of a construction site. An accurate evaluation method will help us reduce a construction cost and time consuming. In this study, we performed the laboratory tests, including grain size measurement, water content, specific gravity, porosity, density and XRD tests, to suggest reliable soil volume conversion factors and weathering indices in field using nondestructive methods. The weathering index and soil volume conversion factor L are obtained for different types of soils. At results, the CIW index is the best method measuring the weathering index and the factor L is relative to natural porosity, void ratio, density and dry density.

• 한국도로학회논문집
• /
• 제20권1호
• /
• pp.59-67
• /
• 2018

PURPOSES : This paper presents a mix design method for using steel slag as an aggregate for asphalt mixtures. METHODS : Steel slag has a different density and absorption rate than natural aggregates. The asphalt content was calculated according to the steel slag characteristics, and the formula for aggregate-gradation correction was presented. RESULTS : The asphalt mix was designed using the proposed equations. Using the proposed mix design method, it was possible to design the asphalt mixture according to the target-usage amount of the recycled aggregate. CONCLUSIONS : The suggested method can be used for asphalt mix design using aggregates with different densities and absorption rates. It is expected to contribute to quality improvement by ensuring accurate calculation of mixing ratios for steel slag asphalt mixtures.

• 생약학회지
• /
• 제27권3호
• /
• pp.267-273
• /
• 1996

The methanol extract of Taraxacum coreanum Nakai (Compositae) was examined on the in vitro oxidation of human low density lipoprotein (LDL). It is well known that LDL oxidation induced artherosclerosis, if we can protect LDL oxidation process, excess plasma lipoprotein accumulation into the arterial lesion prone areas can be blocked. The methanol extract was treated with oxidized LDL which was incubated with $16\;{\mu}M$ $Cu^{2+}$ for metal catalyzed oxidation and TBA value, mobility on agarose gel and formation of conjugated diene and change of vitamin E were determined for the evaluation. The extract showed antioxidative effect at concentration $200\;{\mu}g/ml$ on LDL oxidation.

• 한국의류학회지
• /
• 제21권3호
• /
• pp.600-606
• /
• 1997

The dyeing with loess has been studied. Two kinds of cotton fabrics having different thickness and density were dyed in loess paste bath. The color differences of the fabrics which were dyed repeatedly.five times were not significant. The dyeing of cotton fabrics with loess was not exactly reproducible, but dyeability of the cotton fabrics of high density was better than that of low density. Loess on the dye6 fabrics was physically jammed between the fibers in the form of the fine particles. The cotton fabrics dyed with loess have good light fastness, but their laundering fastness and abrasion fastness were not good. An aftertreatment was carried out by using the extracted solution from acorn or persimon, and FeSO4 lot improving fastness. When the dyed fabrics was after-treated with FeSO4, the laundering fastness and wet abrasion fastness were improved extremely.

• 전력전자학회:학술대회논문집
• /
• 전력전자학회 2002년도 추계학술대회 논문집
• /
• pp.205-208
• /
• 2002

Thermal design is required with considering thermal stability to verify the reliability of electric power device with using IGBT. Numerical analysis is performed to analyzed the change in thermal resistance with respect to the various thermal density of heating element. Correlations between thermal resistance and heat generation density are established. With using these correlations, performance curve is composed with respect to the change in thermal resistance of cooling conditions for natural convection and forced convection. Thermal fatigue is occurred at the Inside and outside of IGBT by repeated heat load. The crack is occurred between base plate and ceramic substrate for the inside. When the crack length is 4mm, the failure is occurred. Therefore, Thermal design method considering thermal density, thermal fatigue resistance is presented on this study and it is expected to thermal design with considering life prediction.

• 대한수학회논문집
• /
• 제16권3호
• /
• pp.519-541
• /
• 2001

Magnetic Resonance Electrical Impedance Tomography(MREIT) is a new medical imaging technique for the cross-sectional conductivity distribution of a human body using both EIT(Electrical Impedance Tomography) and MRI(Magnetic Resonance Imaging) system. MREIT system was designed to enhance EIT imaging system which has inherent low sensitivity of boundary measurements to any changes of internal tissue conductivity values. MREIT utilizes a recent CDI (Current Density Imaging) technique of measuring the internal current density by means of MRI technique. In this paper, a mathematical modeling for MREIT and image reconstruction method called the alternating J-substitution algorithm are presented. Computer simulations show that the alternating J-substitution algorithm provides accurate high-resolution conductivity images.

• 국제초고층학회논문집
• /
• 제7권4호
• /
• pp.409-415
• /
• 2018

Recently, many countries around the world began to show interest in safety against terrorism, fire, and natural disasters. This study aimed to propose a quantitative measurement system for emergency evacuation and safety for various kinds of terrorism and fire within high-rise multi-purpose facilities, which can measure the pedestrians' ordinary walking patterns in the concourse with the highest pedestrian volume out of all the spaces within multi-story buildings, predict pedestrians' evacuation walking lines when a sudden disaster breaks out, and analyze the gait coefficient, occupant density, and evacuation behavior time.

• 대한건축학회논문집:구조계
• /
• 제34권6호
• /
• pp.11-18
• /
• 2018

Isogeometric concept is introduced to find out the optimum layout of plane structure under free vibration. Eigenvalue problem is formulated and numerically solved in order to obtain natural frequencies and mode shapes of plane structures. For the exact geometric expression of the structure, the Non-Uniform Rational B-spline Surface (NURBS) basis functions is employed and it is also used to define the material density functions. A node-wise design variables is adopted to deal with the updating of material density in topology optimization (TO). The definition of modal strain energy is employed to achieve the maximization of fundamental frequency through its minimization. The verification of the proposed TO technique is performed by a series of benchmark test for plane structures.

• 한국건축시공학회:학술대회논문집
• /
• 한국건축시공학회 2021년도 봄 학술논문 발표대회
• /
• pp.91-92
• /
• 2021

In the present work, we simulated and explained the bonding of three alkanethiols - hexanethiol (HT), decanethiol (DT), and 11-mercaptoundecanoic acid (MDA) - with Fe(110) surface and Fe2 clusters using Density Functional Theory (DFT) to probe the corrosion inhibition mechanisms. The interaction energies computed from periodic DFT calculations successfully predicted the experimental inhibition performance. We have found strong covalent bond formation between S(thiol) and Fe-atoms in both approaches, further confirmed by the projected density of states and electron density difference. Besides, natural bond orbital (NBO) charge distribution showed that DT had stronger electron-donation and back-donation synergic interactions with Fe-atoms.

• 한국산림과학회지
• /
• 제109권2호
• /
• pp.202-210
• /
• 2020

본 연구는 일본잎갈나무 임분의 안정성을 고려한 임분밀도 관리의 적정 수준을 탐색하기 위해 수행하였다. 분석에 활용된 조사 표본점 259개소의 자료를 통해 임분밀도관리도를 개발하였고, 이를 이용하여 상대수확량지수(Relative yield index: Ry)와 형상비(Height-to-diameter ratio: H/D)간의 관계 구명을 통해 임분밀도 관리의 적정 수준을 찾고자 하였다. 추정된 임분밀도관리도의 설명력(R²)은 0.600으로 나타났다. 상대수확량지수와 세장목의 출현비율의 관계 분석 결과, 일정임분밀도 이상에 도달할 경우 세장목의 비율이 급격히 증가하였고, 해당 곡선에서의 상대수확량지수(Ry)의 임계값은 0.63으로 분석되었다. 본 연구의 결과는 풍해, 설해와 같은 자연적인 피해를 저감 할 수 있는 임분 관리 전략 수립과 경제림의 생산력 향상을 위한 임분 시업체계 개발에 기여할 것으로 사료된다.