• 대한원격탐사학회:학술대회논문집
• /
• 대한원격탐사학회 2004년도 Proceedings of ISRS 2004
• /
• pp.642-645
• /
• 2004

This paper focuses on recovering systematic biases during LIDAR calibration, particularly using natural surfaces as control features. Many previous approaches have utilized all the points overlapping with the control features and often experienced with an inaccurate value converged with a poor rate due to wrong correspondence in pairing a point and the corresponding control features. To overcome these shortcomings, we establish a preventive scheme to select the pairs of high confidence, where the confidence value is based on the error budget associated with the point measurement and the linearity and roughness of the control feature. This approach was then applied to calibraring the LIDAR data simulated with the given systematic biases. The parameters were successfully recovered using the proposed approach with the accuracy and convergence rate superior to those using the previous approaches.

• 로봇학회논문지
• /
• 제15권1호
• /
• pp.77-89
• /
• 2020

This paper proposes a simple and intuitive model-free torque-tracking control for rotary electro-hydraulic actuators. The undesirable natural-velocity-feedback effect is discussed by introducing mechanical impedance into the electro-hydraulic actuation system. The proposed model-free torque control comprises inner- and outer-loop control to achieve two control objectives. Inner-loop control reduces the mechanical impedance passively and optimally. To improve the tracking accuracy, a certain form of proportional-integral-derivative control is applied to the outer loop. The robustness of the proposed closed-loop system against external disturbances is demonstrated by transforming the two-loop control structure into a disturbance observer form. The proposed method is validated on a single joint electro-hydraulic actuator.

• 한국수산과학회지
• /
• 제38권5호
• /
• pp.316-322
• /
• 2005

In order to develop a floating breakwater, which can efficiently control long period waves, vertical plates are attached in pontoon. Wave control and dynamic behaviors of the newly developed vertical plates type are verified from numerical analysis and hydraulic experiment. As a result, for the wave control and energy dissipation, the newly developed vertical plates type is more efficient than the conventional pontoon type. For the floating body motion, the wave transmission, depending on incident wave period, is decreased at the natural frequency. Dimensionless drift distance has similar trend of the reflection rate of wave transformation near natural frequency except maximum and minimum values. Dimensionless maximum tension is 17 percent of the weight of floating breakwater in case of the conventional pontoon type and 18 percent or 14 percent in case of the newly developed vertical plates type. Thus, it is shown that the wave control is improved by the vertical plates type. In addition, by adjusting the interval of the front and back vertical plate, we would control proper wave control.

• 설비공학논문집
• /
• 제12권2호
• /
• pp.150-160
• /
• 2000

Turbulent natural convective flow and heat transfer in a square enclosure with horizontal partition are investigated numerically. The enclosure is composed of a lower hot and a upper cold horizontal walls and adiabatic vertical walls. Partitions carried with the upward, downward, and both control plates are attached perpendicularly to the one of the vertical insulated walls, respectively. The low Reynolds number $k-\varepsilon$ model is adopted to calculate the turbulent thermal convection. The governing equations are solved by using the finite element method with Galerkin method. The computations have been carried out by varying the length of partition, the position of control plates, and the Rayleigh number based on the temperature difference between two horizontal walls and the enclosure height for water(Pr=4.95). When the control plates are attached at the edge of partition, the stability of oscillating flow grows wrose with the increase of Rayleigh number and the partition length. The heat transfer rate has been reducer than that of no control plate due to the restraint of control plates with the increase of Rayleigh number.

• 한국가금학회지
• /
• 제39권1호
• /
• pp.17-25
• /
• 2012

Coccidiosis control programs such as vaccines or in-feed anticoccidials are commonly practiced in the poultry industry to improve growth performance and health of commercial broiler chickens. In this study, we assessed the effects of various coccidiosis control programs (e.g., in ovo vaccination, synthetic chemicals, and antibiotic ionophores) on immune status of broiler chickens vaccinated against infectious bronchitis virus and Newcastle disease virus (ND) and raised on an Eimeria-contaminated used litter. In general, the levels of ${\alpha}$-1-acid glycoprotein, an acute phase protein, were altered by the treatments when measured at 34 days of age. Splenocyte subpopulations and serum antibody titers against ND were altered by various coccidiosis control programs. In-ovo-vaccinated chickens exhibited highest mitogenic response when their spleen cells were stimulated with concanavalin A (Con A) at 7 days of age. It is clear from this study that the type of coccidiosis control program influenced various aspects of innate and adaptive immune parameters of broiler chickens. Further studies will be necessary to delineate the underlying relationship between the type of coccidiosis control program and host immune system and to understand the role of other external environmental factors such as gut microbiota on host-pathogen interaction in various disease control programs.

• 한국산업보건학회지
• /
• 제31권2호
• /
• pp.173-183
• /
• 2021

Objectives: This study evaluated the skin permeability of lawsone in henna hair dyes to understand the exposure characteristics of henna hair dyes in the human body. It examined the protective effects of protectants by applying protectants A, B, and C to test skin. Methods: Skin absorption tests were conducted using Franz diffusion cells according to OECD test guideline 428. After applying one kind of natural henna hair dye and chemical henna hair dye, respectively, to a standardized pig skin model, samples of receptor fluid were collected at 1h, 3h, 6h, and 24h. The skin permeation of lawsone was determined using HPLC. After the skin absorption experiment, the skin to which hair dye was applied was analyzed to determine the residual amount of lawsone in the skin. Results: The cumulative permeation of both natural and chemical henna hair dyes increased over time, and the natural henna hair dye had a flux value (t=3.194, p<.05) high both in the K_p value (t=3.207, p<.05) and the residual amount (t=22.701, p<.001). For skin treated with a protectant, the cumulative permeation of natural henna hair dye 24h control and the cumulative permeation of protectant A, B, and C increased over time. Flux and K_p values were in the order control > protectant A > protectant C > protectant B. The residual amount (F=4.469, p<.05) was in the order of protectant C > protectant A > protectant B > control. At 3h, the dye application time of natural henna hair dye, the lawsone flux value (F=4.454, p<.05) and K_p value (F=4.455, p<.05) were higher in the control group than in the protectant groups. The 24h cumulative permeation of the chemical henna hair dye increased with time in both the control and the protectant groups, and the flux and K_p values were in the order of protectant A > protectant C > protectant B > control. The residual amount (F=7.901, p<.01) was in the order of protectant B > protectant A> protectant C > control. Conclusions: Within the normal dyeing time for henna hair dye (three hours for natural henna hair dyes and 30 minutes for chemical henna hair dyes) lawsone skin penetration was not observed even when no protective agent was applied. After that time, however, evidence of skin penetration and retention of lawsone and the protective effect of protective agents were observed.

• The Journal of Asian Finance, Economics and Business
• /
• 제7권3호
• /
• pp.137-148
• /
• 2020

The purpose of this study is to investigate factors influencing risk assessment of material misstatement in Vietnamese enterprises listed on stock market. Expert interview method was conducted to discover the scales for three variables including information system, trademark, and risk assessment of material misstatement. Survey method was used to examine the impacts of eight factors on risk assessment of material misstatement. Data is collected from 317 auditors who have excellent experience in auditing financial statements of companies listed on stock market. Then, data is processed by descriptive statistics, reliability analysis, factor extracted analysis, correlative regression analysis, and analysis variance of residual change. The research findings showed that business characteristic, stakeholder pressure, and economic environment have positive relationships with risk assessment of material misstatement. Three variables including operation control and monitor, control environment, and information system negatively affect to risk assessment. Specially, business characteristic and information system, which are elements in internal control, have strongest impact on risk assessment. One the other hand, assessment of internal control plays an important role not only in the audit plan stage but also throughout the stages of the audit implementation and ending. Therefore, appropriate solutions are proposed to carry out all audit stages.

• 한국디지털건축인테리어학회논문집
• /
• 제10권3호
• /
• pp.79-86
• /
• 2010

From the research which sees the building which uses a natural control method with ecological architecture, continuity tried to divide the building which uses a physical control method with sustainable architecture. Ecological architecture analyzes the microclimate of the area and applies mining and natural ventilation leads and that the interior environment controls, the condition of the site actively and there is a possibility of seeing. Also sustainable architecture which is possible to lead and recycling and reuse of the resources and energy cyclic process of the construction resources to lead and the interior environment to control. Therefore the case where the facility system and structural system become integrated design organically in natural circulating method is many. Specially the sunshade system and double skin system are combined and structural system of the building and there is a possibility of having the envelope which form is feature. Today the buildings lead and the system integration process where the integral parts are systematic is demanded the interior environment which and an external form and that, they make they are there is a possibility of seeing. the environmental building which hits joins in with natural control method and the structure and facility system are integrated and has the tendency which is developed and there is a possibility of saying that a meaning with the alternative construction will be able to reduce the resources and an energy.

• Smart Structures and Systems
• /
• 제21권5호
• /
• pp.583-590
• /
• 2018

Nowadays, many tunnels have been commissioned for several decades, which require effective inspection methods to assess their health conditions. The ambient vibration test has been widely adopted for the damage identification of concrete structures. In this study, the vibration characters of tunnel lining shells built with forepoling method was analyzed based on the analytical solutions of the Donnell-Mushtari shell theory. The broken rock, foreploing, rock-concrete contacts between rock mass and concrete lining, was represented by elastic boundaries with normal and shear stiffness. The stiffness of weak contacts has significant effects on the natural frequency of tunnel lining. Numerical simulations were also carried out to compare with the results of the analytical methods, showing that even though the low nature frequency is difficult to distinguish, the presented approach is convenient, effective and accurate to estimate the natural frequency of tunnel linings. Influences of the void, the lining thickness and the concrete type on natural frequencies were evaluated.

• 한국실내디자인학회논문집
• /
• 제1호
• /
• pp.72-75
• /
• 1992

Lighting made interior space visible and to recognize space itself. Sp9ace and form are established not themselves , but lighting. and dextrous treatment of natural light accomplished poeteic space. Inflowing of lighting in interior space is main factor to decide space character and image . That was recognized in interior space through many centries. At this point, this study was described for that present inflowing of lighting adapting space character and right method in lighting program. The present study is to present the planning method of the most appropriate and the most rational natural lighting in planing for lighting. Under this premise the followings are made ; I. An introduction , the purpose, the sphere, and the method of this study are stated. II, The present writer studied the general characteristics of natural lighting. III. this author studied the factor of decision on control and representation skill of lighting along the following. IV. Analyzing interior space in which the natural lighting is introduced through some literature and case studies. Physics, psychology, structure, equipment, material. V. The last, the author rearranged the results of this study.