• 한국원자력학회:학술대회논문집
• /
• 한국원자력학회 1997년도 춘계학술발표회논문집(2)
• /
• pp.503-508
• /
• 1997

The effect of rotary inertia of concentrated masses on the natural vibration of the simply supported-simply supported fluid conveying pipe has been studied. For the analysis Galerkin's method is used fer transformation of the governing equation to the eigenvalue problem and the natural frequencies and mode shapes for the system have been found. Introduction of rotary inertia results in lots of change on the natural frequencies and mode shapes and its effect is highly noticed at the higher natural frequencies and mode shapes. Consideration of rotary inertia results in much decrease on the natural frequencies and its neglect could lead to erroneous results.

• 한국소음진동공학회논문집
• /
• 제13권10호
• /
• pp.821-827
• /
• 2003

The so-called boundary node method (or NDIF method) that was developed by the authors has been extended for free vibration analysis of arbitrarily shaped plates with free edges. Since the proposed method requires no interpolation functions. no integration Procedure is needed on boundary edges of the plates and only a small amount of numerical calculation is involved, compared with FEM and BEM. In order to explain tile reason why spurious eigenvalues are generated when the NDIF method is applied to free plates, the NDIF method has been considered for free vibration analysis of both a fixed string and a free beam. Finally, verification examples show that natural frequencies obtained by the present method agree well with those given by an exact method or a numerical method (ANSYS).

• 한국소음진동공학회:학술대회논문집
• /
• 한국소음진동공학회 2008년도 춘계학술대회논문집
• /
• pp.569-574
• /
• 2008

Nowadays, the equipment for a semiconductor process is required to raise accuracy and productivity. Therefore, the natural frequency of the equipment has been lowered because it has been precise, rapid, large, and light. In order to improve the efficiency of production, it is necessary for the equipment to increase the operation speed, which causes inevitable vibration problems. In this paper, influence analysis of ball-screw in the equipment and evaluation method for the vibration on the base are presented based on the analyses of dynamic characteristics for the mechanical structure through the modal test.

• 한국소음진동공학회:학술대회논문집
• /
• 한국소음진동공학회 2011년도 추계학술대회 논문집
• /
• pp.440-445
• /
• 2011

Dynamic characteristic analysis is required in developing SMT mounter system with high installation speed and position precision, because of vibration source occurred by positioning head. This paper presents the method of improving dynamic characteristic of SMT(Surface Mount Technology) mounter with finite element method and modal test. The design direction is that natural frequencies of SMT mounter must be higher than the vibration source. In addition, the effect of input shaping on residual vibration reduction is investigated by simulating the response of a first-order system.

• 한국소음진동공학회논문집
• /
• 제15권12호
• /
• pp.1416-1421
• /
• 2005

This paper presents an analytical approach for the vibration characteristics of a piezoelectric disc for torsional vibration transducers. The characteristic equation of the piezoelectric annular disc has been derived from Gibbs' free energy equations and mechanical and electrical equilibrium. With an anisotropic material properties of the disc, the characteristic equation has yielded resonance frequencies. Numerically-calculated results have been compared with the results obtained by the finite element analysis and experiments and have confirmed the validity of the theoretical analysis.

• Advances in nano research
• /
• 제15권5호
• /
• pp.411-422
• /
• 2023

In the present study, the axial vibration of the nanorods is investigated in the framework of the doublet mechanics theory. The equations of motion and boundary conditions of nanorods are derived by applying the Hamilton principle. A finite element method is developed to obtain the vibration frequencies of nanorods for different boundary conditions. A two-noded higher order rod finite element is used to solve the vibration problem. The natural frequencies of nanorods obtained with the present finite element analysis are validated by comparing the results of classical doublet mechanics and nonlocal strain gradient theories. The effects of rod length, mode number and boundary conditions on the axial vibration frequencies of nanorods are examined in detail. Mode shapes of the nanorods are presented for the different boundary conditions. It is shown that the doublet mechanics model can be used for the dynamic analysis of nanotubes, and the presented finite element formulation can be used for mechanical problems of rods with unavailable analytical solutions. These new results can also be used as references for the future studies.

• 한국소음진동공학회:학술대회논문집
• /
• 한국소음진동공학회 2004년도 춘계학술대회논문집
• /
• pp.831-836
• /
• 2004

Vibration of electric-powered hand grinder comes from the parts of motor, gear, bearing, and fan. Excessive vibration can be harmful to workers. To reduce vibration of a hand grinder we analyzed the frequency components from the routing electric-powered grinder and did modal test to find the natural frequencies of the each part. It shows that the vibration is due to the resonance of the case. To remove the resonance, the case structure is modified and the bearing cap is replaced on a basis of the results from the rotor dynamic analysis using SAMCEF. As a result the vibration of the hand grinder is reduced greatly.

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 2005년도 추계학술대회 논문집
• /
• pp.6-11
• /
• 2005

During the acceptance test of KTX, lateral vibration of carbody at the tail of the train was found. The carbody lateral vibration was occurred on a straight line in the winter season. We analysis to find the cause of the lateral vibration and the countermeasure. The analysis results show that lateral stiffness of air spring is the most important parameter to cause the carbody lateral vibration. The lateral vibration is occurred at frequency range $0.5{\sim}0.6Hz$ with a negative damping value. We also blow that natural frequency of lateral vibration increase with the train speed up to 1Hz at 300km/h.

• International Journal of Reliability and Applications
• /
• 제5권2호
• /
• pp.59-74
• /
• 2004

There are many uncertain parameters associated with vibration components. Their physical parameters, the machining quality of vibration components, and the applied load acting on them are all uncertain. As a result, the natural frequency and the fatigue limits are also uncertain variables. In this paper, we express these parameters of vibration components and the frequency zone of resonance through interval models; this way, the robust reliability of the vibration components is defined. The robust reliability model measures and assesses the reliability of vibration components. The robust reliability of a cantilever beam is evaluated as an example. The results show that this method is reasonable for robust reliability analysis of vibration components because it does not require a large amount of failure data, it avoids the evaluation of the probability density function, and the computation is simple.

• 동력기계공학회지
• /
• 제11권1호
• /
• pp.20-27
• /
• 2007

In this paper, finite element modeling was performed for vibration analysis of a rotor system installed in sunroof motor, and analysis process was developed for natural frequency and unbalance response analysis. At the same time, to reduce analysis modeling error caused by the difference between analysis and measured values, finite element model updating was conducted using an optimization algorithm, i.e. hybrid genetic algorithm and simulated annealing (HGASA) method. For this end experimental modal test was carried out and by using the measured frequency response function (FRF), model updating was performed considering both cases where core coil was removed and included. And acceptable result was obtained. Also, dynamic property coefficient of bush bearing which influences vibration response of the rotor system was estimated.