• 한국실내디자인학회논문집
• /
• 제20권5호
• /
• pp.135-142
• /
• 2011

This study applies the 'interface' as the concept to interpret the facade design of parking garages. This study investigates the characteristics of interface design in the parking garages to improve design qualities of parking garages as a daily living space as well as a public space in today's city. The facade of parking garage is an interface between the urban streets and the parking space. Three concepts of interface and design in parking garage are defined. The concept of interface is explained as a boundary surface which activates communication and interaction. In facade design of parking garage, three main concepts of interface design are screen, communication and mobility. Through the investigation of the examples, this study summarizes the characteristics of the facade design of parking garage as follow; first, the facade of parking garage is designed as a screen which represents immateriality by specially selected and arranged surface materials. The screen facade is designed as one homogeneous surface as well as an irregular pattern with operable louvers. Second, the facade of parking garage is designed as a communication media to deliver direct information. The representation of natural or artificial characteristics at the local areas is to communicate with the people in the community. Third, the facade of parking garage is represented mobility which a car symbolizes. It emphasizes various movements and visual changes by movements. People can experience the visual changes of the building facade as they walk or drive. The visual changes of the facade are caused by natural elements such as wind and light as well as an optical illusion.

• 한국전기전자재료학회논문지
• /
• 제14권7호
• /
• pp.578-583
• /
• 2001

The bushing for high voltage and large and power should endure weight of itself and force of pushing from contact with circuit breaker. Like this, epoxy mold bushing has to be strong without fault. However, the external circumstances and internal factors was caused by partial discharge, flashover and dielectric breakdown. Therefore, to remove external factor of defect and to prevent the internal cracks and cavity generated from the contraction on interface of Cu-Epoxy, we should form semi-conductive layer on Cu bar by carbon. Then, the PD properties and the insulation qualities of epoxy mold type bushing was able to improved by roles of cushions for the direction of diameter and by effects fo natural sliding like as separated from conductor for the direction of length. So, in this work, we could prove the method of semi-conductive layer in making the long conductor.

• 대한기계학회:학술대회논문집
• /
• 대한기계학회 2000년도 춘계학술대회논문집B
• /
• pp.37-44
• /
• 2000

Numerical investigation is made to study the effects of natural convection on the formation of macrosegregation of a Pb-Sn alloy solidification process in a 2-D confined rectangle mold. The governing equations are calculated using previous continuum models with SIMPLE algorithm doring the solidification process. In addition. to track the solid-liquid interface with time variations. the moving boundary condition Is adopted and irregular interface shapes are treated with Boundary-Fitted Coordinate system. As the temperature reduce from the liquidus to the solidus, the liquid concentration of Sn. the lighter constituent, increases. Then the buoyancy-driven flow due to temperature and liquid composition gradients, called thermosolutal convection or double diffusion, occurs in the mushy region and forms the complicated macrosegregation maps. Related to this phnomena, effects on the macrosegregation formation depending on the cooling condition and gravity values are described.

• Educational Technology International
• /
• 제18권1호
• /
• pp.49-71
• /
• 2017

The purpose of the study was to identify key design features of virtual reality with head-mounted displays (HMD) and touchless interface for the hearing-impaired and hard-of-hearing learners. The virtual reality based training program was aimed to help hearing-impaired learners in machine operating learning, which requires spatial understanding to operate. We developed an immersive virtual learning environment prototype with an HMD (Oculus Rift) and a touchless natural user interface (Leap Motion) to identify the key design features required to enhance virtual reality for the hearing-impaired and hard-of-hearing learners. Two usability tests of the prototype were conducted, which revealed that several features in the system need revision and that the technology presents an enormous potential to help hearing-impaired learners by providing realistic and immersive learning experiences. After the usability tests of hearing-impaired students' exploring the 3D virtual space, interviews were conducted, which also established that further revision of the system is needed, which would take into account the learners' physical as well as cognitive characteristics.

• 한국전산유체공학회지
• /
• 제6권1호
• /
• pp.1-13
• /
• 2001

The natural convection heat transfer and solidification in a stratified pool are studied. The flow and heat transfer characteristics in a heat generating pool are compared between single-layered and double-layered pools. And local Nusselt number distributions on outer walls are obtained to consider thermal loads on a vessel wall. The cooling and solidification of Al₂O₃/Fe melt in a hemispherical vessel are simulated to study the mechanism of heat transfer and temperature distribution. A unstructured mesh is chosen for this study because of the non-orthogonality originated from the boundaries of double-layered pool. Interface between the layers is modeled to be fixed. With this assumption mass flux across the interface is neglected, but shear force and heat flux are considered by boundary conditions. The colocated cell-centered finite volume method is used with the Rhie-Chow interpolation to compute cell face velocity. To prevent non-physical solutions near walls in case body force is large the wall pressure is extrapolated by the way to include body force. The numerical solutions calculated by current method show that averaged downward heat flux of the double-layered pool increases compared to single-layered pool and maximum temperature occurs right below the interface of the layers.

• 방송공학회논문지
• /
• 제19권1호
• /
• pp.83-95
• /
• 2014

최근 손과 손가락을 인식하는 기술은 HCI(human computer interaction)에서 자연스럽고 친숙한 환경을 제공하기 위한 기술로 주목 받고 있다. 본 논문에서는 깊이 카메라를 이용하여 손과 손가락의 모양을 검출 및 인식하는 방법을 제안하고, 그 인식 결과를 활용하여 다양한 기기와 상호연동 할 수 있는 MPEG-U 기반 향상된 사용자 상호작용 인터페이스 시스템을 제안한다. 제안하는 시스템은 깊이 카메라를 이용하여 손을 검출한 후, 손목의 위치를 찾아 최소 손 영역을 검출한다. 이어서 검출된 최소 손 영역으로부터 손가락 끝점을 검출 한 후, 최소 손 영역의 중심점과 손가락 끝점간의 뼈대를 만든다. 이렇게 만든 뼈대의 길이와 인접 뼈대간의 각도차를 분석하여 손가락을 판별한다. 또한, 제안하는 시스템은 사용자가 MPEG-U에서 정의하는 다양한 심벌들을 손 자세로 취하였을 때 제안 방법을 이용하여 손 자세를 인식하고, 인식 결과를 상호연동 가능한 MPEG-U 스키마 구조로 표현한다. 실험에서는 다양한 환경에서 제안하는 손 자세 인식 방법의 성능을 보인다. 또한, 제안 시스템의 상호연동성을 보이기 위해 인식 결과를 MPEG-U part2 표준에 맞는 XML 문서로 표현하고, MPEG-U 참조 소프트웨어를 이용하여 그 표현 결과에 대한 표준 부합성을 검증한다.

• 전기학회논문지
• /
• 제63권4호
• /
• pp.565-569
• /
• 2014

Recently, various kinds of new computer controlled devices have been introduced in a wide range of areas, and convenient user interfaces for controlling the devices are strongly needed. To implement natural user interfaces(NUIs) on top of the devices, new technologies like a touch screen, Wii Remote, wearable interfaces, and Microsoft Kinect were presented. This paper presents a natural and intuitive gesture-based model for controlling contents of LCD display. Microsoft Kinect sensor and its SDK are used to recognize human gestures, and the gestures are interpreted into corresponding commands to be executed. A command dispatch model is also proposed in order to handle the commands more naturally. I expect the proposed interface can be used in various fields, including display contents control.

• 한국멀티미디어학회논문지
• /
• 제15권4호
• /
• pp.501-507
• /
• 2012

Human body motion is a non-verbal part for interaction or movement that can be used to involves real world and virtual world. In this paper, we explain a study on natural user interface (NUI) in human hand motion recognition using RGB color information and depth information by Kinect camera from Microsoft Corporation. To achieve the goal, hand tracking and gesture recognition have no major dependencies of the work environment, lighting or users' skin color, libraries of particular use for natural interaction and Kinect device, which serves to provide RGB images of the environment and the depth map of the scene were used. An improved Camshift tracking algorithm is used to tracking hand motion, the experimental results show out it has better performance than Camshift algorithm, and it has higher stability and accuracy as well.

• 한국농공학회지
• /
• 제43권6호
• /
• pp.187-196
• /
• 2001

In this study, by using the natural language processing of the field of artificial intelligence, automated index was performed. And then, the Natural Language Processing Interface for knowledge representation(NALPI) has been developed. Furthermore, the DEsign KnOwledge DataBase(DEKODB) has been also developed, which is designed to interlock the knowledge base. The DEKODB processes both the documented design-data, like a concrete standard specification, and the design knowledge from an expert. The DEKODB is also simulates the design space of structures accordance with the production rule, and thus it is determined that DEKODB can be used as a engine to retrieve new knowledge and to implement knowledge base that is necessary to the development of automatic design system. The application field of the system, which has been developed in this study, can be expanded by supplement of the design knowledge at DEKODB and developing dictionaries for foreign languages. Furthermore, the perfect automation at the data accumulation and development of the automatic rule generator should benefit the unified design automation.

• 대한치과교정학회지
• /
• 제22권2호
• /
• pp.327-343
• /
• 1992

Metal brackets and ceramic brackets were bonded to natural teeth, porcelain crowns and gold crowns After stored in artificial saliva solution for 72 hours at $37^{\circ}C$, the shear bond strengths were measured by Instron and compared with them, the bonding sites and bracket bases were examined by scanning electron microscope and light optical stereomicroscope. The results were as follows: 1. The shear bond strengths of the group which metal brackets were bonded to natural teeth and the groups which ceramic brackets were bonded to natural teeth and porcelain crowns were comparable to each other, the shear bond strength of the group which metal brackets were bonded to gold crowns was significantly low. 2. The bond failed predominantly at the bracket base/adhesive interface with the bulk of adhesive remaining on enamel in the group which metal brackets were bonded to natural teeth. 3. The bond failed consistently at the crown/adhesive interface with all of adhesive remaining on the bracket babes in the group which metal brackets were bonded to gold crowns. 4. The bond failed at the enamel or crown/adhesive interface with the bulk of adhesive remaining on the bracket bases in the groups which cramic brackets were bonded to natural teeth and porcelain crowns. 5. The shear bond strengths of the groups which ceramic brackets were bonded to porcelain crowns were not affected by etching time.