• Safety and Health at Work
• /
• v.1 no.1
• /
• pp.1-10
• /
• 2010

The Finnish risk assessment practice is based on the Occupational Safety and Health (OSH) Act aiming to improve working conditions in order maintain the employees' work ability, and to prevent occupational accidents and diseases. In practice there are hundreds of risk assessment methods in use. A simple method is used in small and medium sized enterprises and more complex risk evaluation methods in larger work places. Does the risk management function in the work places in Finland? According to our experience something more is needed. That is, understanding of common and company related benefits of risk management. The wider conclusion is that commitment for risk assessment in Finland is high enough. However, in those enterprises where OSH management was at an acceptable level or above it, there were also more varied and more successfully accomplished actions to remove or reduce the risks than in enterprises, where OSH management was in lower level. In risk assessment it is important to process active technical prevention and exact communication, increase work place attraction and increase job satisfaction and motivation. Investments in OSH are also good business. Low absenteeism due to illness or accidents increases directly the production results by improved quality and quantity of the product. In general Finnish studies have consistently shown that the return of an invested euro is three to seven-old. In national level, according to our calculations the savings could be even 20% of our gross national product.

• Journal of the Korean Society of Safety
• /
• v.35 no.4
• /
• pp.40-47
• /
• 2020

Although gangform has good workability due to the integration of outer wall forms and working platforms, 22 workers were died from 21 gangform related accidents during 2012 to 2016. Quantitative risk assessment is required for evident based prevention measure selection. In this study, based on 52 accident data from 2004 to the first half of 2019, FTA is conducted for probabilities of direct causes and their contribution to accidents. Three stages are considered; gangform installation, dismantling and lifting, and using. The effectiveness of countermeasures is evaluated through minimum cut set, RAW and RRW. Complete assembly of gangform on the ground level, detailed planning, and fall prevention device are suggested as prevention measures for installation, dismantling and lifting, and using stages, respectively.

• Journal of Nuclear Fuel Cycle and Waste Technology(JNFCWT)
• /
• v.19 no.1
• /
• pp.113-121
• /
• 2021

A safety assessment of radioactive waste repositories is a mandatory requirement process because there are possible radiological hazards owing to radionuclide migration from radioactive waste to the biosphere. For a reliable safety assessment, it is important to establish a parameter database that reflects the site-specific characteristics of the disposal facility and repository site. From this perspective, solubility, a major geochemical parameter, has been chosen as an important parameter for modeling the migration behavior of radionuclides. The solubilities were derived for Am, Ni, Tc, and U, which were major radionuclides in this study, and on-site groundwater data reflecting the operational conditions of the Gyeongju low and intermediate level radioactive waste (LILW) repository were applied to reflect the site-specific characteristics. The radiation dose was derived by applying the solubility and radionuclide inventory data to the RESRAD-OFFSITE code, and sensitivity analysis of the dose according to the solubility variation was performed. As a result, owing to the low amount of radionuclide inventory, the dose variation was insignificant. The derived solubility can be used as the main input data for the safety assessment of the Gyeongju LILW repository in the future.

• Proceedings of the Korean Institute of Industrial Safety Conference
• /
• 2004.04a
• /
• pp.47-52
• /
• 2004

• Korean Journal of Fisheries and Aquatic Sciences
• /
• v.49 no.1
• /
• pp.7-12
• /
• 2016

Total mercury (TM) is a hazardous element that is of particular concern to human health. Due to the diversity of dietary habits among fishes, tissue-specific analysis of hazardous elements is necessary. In this study, the tissue-specific TM in cultured fish was analyzed to conduct risk assessment. The highest concentrations of TM were found in the farmed marine fish Pagrus major (0.111 mg/kg) and in the farmed freshwater fish Channa argus (0.162 mg/kg). TM concentration was significantly correlated with total fish length (P<0.01). Significant differences in TM were found between three types of fish tissue, with the concentration in fish muscle being significantly higher than those of gill or liver (P<0.01). Moreover, the tissue-specific TM concentrations of farmed freshwater fish were significantly higher than those of farmed marine fish (P<0.01). According to the risk assessment, the TM body exposure rate of muscle and liver in cultured fishes ranged from 0.001 to 0.389% of the Provisional Tolerable Weekly Intake. Therefore, these results showing the tissue-specific TM contents of cultured fish could be useful to assess the health risks of Korean dietary habits.

• Toxicological Research
• /
• v.31 no.3
• /
• pp.221-226
• /
• 2015

With the diversification and internationalization of the food industry and the increased focus on health from a majority of consumers, food safety policies are being implemented based on scientific evidence. Risk analysis represents the most useful scientific approach for making food safety decisions. Total diet study (TDS) is often used as a risk assessment tool to evaluate exposure to hazardous elements. Many countries perform TDSs to screen for chemicals in foods and analyze exposure trends to hazardous elements. TDSs differ from traditional food monitoring in two major aspects: chemicals are analyzed in food in the form in which it will be consumed and it is cost-effective in analyzing composite samples after processing multiple ingredients together. In Korea, TDSs have been conducted to estimate dietary intakes of heavy metals, pesticides, mycotoxins, persistent organic pollutants, and processing contaminants. TDSs need to be carried out periodically to ensure food safety.

• Journal of the Korean Society of Safety
• /
• v.29 no.6
• /
• pp.137-143
• /
• 2014

Asbestos is given to a variety of six naturally occurring silicate minerals. These minerals possess high tensile strength, flexibility, resistance to chemical and thermal degradation, and electrical resistance. These minerals have been used for decades in thousands of commercial products, such as insulation and fireproofing materials, automotive brakes, textile products, cement and wallboard materials. When handled, asbestos can separate into microscopic-size particles that remain in the air and are easily inhaled. It is now known that prolonged inhalation of asbestos fibers can cause serious and fatal illnesses including malignant lung cancer, mesothelioma, and asbestosis. Therefore the use of asbestos and asbestos products has dramatically decreased in recent years. Also all constructions including asbestos should be removed under strictly controlled conditions and very tightly implemented health & safety management systems. In this study, the process of the removal work of the asbestos cement slate was analyzed by IDEF-0 modeling and evaluated by 4M risk assessment method. The results show that removal work of the asbestos cement slate was classified five process and eighteen detail process. The risk of safety side the higher than the risk of health side in 4M risk assessment.

• Korean Journal of Environmental Agriculture
• /
• v.31 no.1
• /
• pp.75-95
• /
• 2012

BACKGROUND: Increase of heavy metals in agricultural ecosystem has become a social issue nationwide as it is related to public health. This review was performed to find out more systematic and integrated future researches on heavy metals using up to date articles published in the Korean journals related to agricultural environment. METHODS AND RESULTS: Researches on heavy metals in agricultural soils and plant uptake were categorized by the establishment of criteria, analytical methods, monitoring, management of source, characteristics and behavior in soil, plant uptake, bioavailability affecting physico -chemical properties in soil, risk assessment and soil remediation. In the early 1990s, the monitoring for heavy metals in soil has been widely performed. Accumulation of heavy metals in contaminated soil and availability to plants has also attracted interests to study the soil remediation using various physico-chemical methods. The phytoavailability and phytotoxicity of heavy metals have been mainly studied to assess the safety of agro-products using risk assessment techniques in the 2000s. CONCLUSION: Future direction of research on heavy metal in agricultural environment must be carried out by ensuring food safety and sustainability. A steady survey and proper management for polluted regions should be continued. Law and regulation must be modified systematically. Furthermore, studies should expand on mitigation of heavy metal uptake by crops and remediation of polluted fields.

• Journal of the Korean Society of Safety
• /
• v.19 no.2
• /
• pp.26-33
• /
• 2004

This study presents a hazard assessment of the human body exposed to electic shock considering various parameters which affect severity of the electric shock. The present study has two research objectives; one is no analyze hazards of the human body by the elctric shock both on the ground and in the water. The other is to understand the mechnism of the electric shock. In order to achieve these objectives the hazard of shock is estimated by comparing with physiological effects of electric curren througn the human body according to variation of shock parameters of shock circuits. The shock parameters adopted in this paper consist of body resistance, resistance of protective equipment, ground resistance, shock duration, depth of gound surface layer, relection factor, permissible touch voltage, body current and body voltage. Besides, safety standard determining hazard degree of the human body is introduced. And hazard of the human body due to the electric shock is quantitatibely assessed in consideration of data obtained by the method suggested herein, and final results are presented and discussed.

• Journal of the Korean Society of Safety
• /
• v.15 no.4
• /
• pp.112-118
• /
• 2000

This paper is resulted from the research to activate Self-control Safety Management system that adopted to improve an assessment system for Hazard Prevention Plan. And members of company, university and research institute have jointly participated in the research. First, it is investigated that introduced background and processing method with existing practical data & materials references in order to understand what domestic Self-control Safety Management system will be available for. And general construction company at site have their ability to assess Hazard Prevention Plan by mailing questionnaire to on thousand site, visits, and interviews. Also, It is investigated how much they have the assessment ability. It is selected to do a questionnaire survey for the status of self-regulatory safety assessment ability of the designated self-regulatory companies in order to produce and enhance the self-regulatory assessment ability and the necessity of Self-control Safety Management system. Finally, it is selected to do a questionnaire survey for fixing and the enhance Self-control Safety Management system of general construction contractors.