Journal of the Korean Society of Safety (한국안전학회지)

The Korean Society of Safety (한국안전학회)
권호 표지
DOI QR코드

DOI QR Code

Quantitative Risk Assessment based on Fault Tree Analysis for Gangform Accident

갱폼 재해의 FTA를 통한 정량적 위험성 산정에 관한 연구

  • Ham, Young Jong (Samsung C&T Corporation, Qualty Safety Execution Group) ;
  • Kee, Jung Hun (Department of Safety Engineering, Seoul National University of Science and Technology) ;
  • Park, Jong Yil (Department of Safety Engineering, Seoul National University of Science and Technology)
  • 함영종 (삼성물산(주) 품질안전실천그룹) ;
  • 기정훈 (서울과학기술대학교 안전공학과) ;
  • 박종일 (서울과학기술대학교 안전공학과)
  • Received : 2020.06.08
  • Accepted : 2020.08.04
  • Published : 2020.08.31
Download PDF
⟨ Previous Next ⟩

Abstract

Although gangform has good workability due to the integration of outer wall forms and working platforms, 22 workers were died from 21 gangform related accidents during 2012 to 2016. Quantitative risk assessment is required for evident based prevention measure selection. In this study, based on 52 accident data from 2004 to the first half of 2019, FTA is conducted for probabilities of direct causes and their contribution to accidents. Three stages are considered; gangform installation, dismantling and lifting, and using. The effectiveness of countermeasures is evaluated through minimum cut set, RAW and RRW. Complete assembly of gangform on the ground level, detailed planning, and fall prevention device are suggested as prevention measures for installation, dismantling and lifting, and using stages, respectively.

Keywords

References

  1. Ministry of Employment and Labor of Korea, Occupational Safety and Health Act, 2019.
  2. Ministry of Land, Infrastructure and Transport of Korea, Construction Technology Promotion Act, 2019.
  3. K. S. Son and S. O. Kim, "Analysis of Efficient Investment for Apartment Gang Form Work by FTA Technique", J. Korean Soc. Saf., Vol. 17, No. 1, pp. 87-93, 2002.
  4. O. N. Aneziris, E. Topali and I. A. Papazoglou, "Occupational Risk of Building Construction", Reliability Engineering & System Safety, Vol. 105, pp. 36-46, 2012. https://doi.org/10.1016/j.ress.2011.11.003
  5. O. Aneziris et al., "The Quantification of Occupational Risk, The Development of a Risk Assessment Model and Software", RIVM report 620801001, 2008.
  6. J. J. Woo, M. H. Kim, C. Y. Chu and J. B. Baek, "Synthesizing Failure Data of Pump in PCB Manufacturing using Bayesian Method", J. Korean Soc. Saf, Vol. 35, No. 1, pp. 79-86, 2020. https://doi.org/10.14346/JKOSOS.2020.35.1.79
  7. Z. W. Birnbaum, On the Importance of Different Components in a Multicomponent System, Washington Univ Seattle Lab of Statistical Research, 1968.
  8. W. E. Vesely et al., "Measures of Risk Importance and Their Applications", Battelle Columbus Labs, 1983.
  9. M. C Cheok, G. W. Parry and R. R. Sherry, "Use of Importance Measures in Risk-informed Regulatory Applications", Reliability Engineering & System Safety, Vol. 60, No. 3, pp. 213-226, 1998. https://doi.org/10.1016/S0951-8320(97)00144-0
  10. Korea Occupational Safety & Health Agency, "Statistics Information of the Status of Industrial Accidents", 2007-2018.
  11. Korea Occupational Safety & Health Agency, "Domestic Disaster Cases", 2004-2017.
  12. Korea Occupational Safety & Health Agency, Incheon Regional Headquarters, "Industrial Accident Cases", 2019.
  13. Korea Institute of Civil Engineering and Building Technology, "2019 Standard of Construction Estimate", 2019.
  14. Korea Housing Builders Association, "Apartment Housing Status", 2004-2019.
  15. Relyence, "Relyence Fault Tree Importance Measures", 2018.