• Korean Security Journal
• /
• no.50
• /
• pp.11-32
• /
• 2017

The Civil Contingencies Act 2004 in the United Kingdom provides a comprehensive definition of "Emergency", calling upon the Uk's emergency management to deal with any disaster risk regardless of cause or source. Old contingency plans for civil defense and peacetime emergencies have been integrated into current integrated emergency management. In the UK, emergencies are managed by emergency services and other responders at the local level without direct involvement of central government. On top of this, a classified assessment of the risks of civil emergencies is also conducted on a regular basis, not only at the local level but also at the national level. This research looks into the Uk's emergency management system, including recent changes, and its risk assessment systems. Finally, the research draws policy implications for the development of Korea's disaster management mechanism as follows: 1) Korea should adopt an integrated emergency management system and combine civil defense with peacetime emergency planning, 2) it should create inter-operability between emergency responding organizations such as police, fire and ambulance, and finally 3) it must develop risk evaluating tools, such as a Community Risk Register and National Risk Register, both at the local and the national level. Last but not least, the UK emergency management system cannot be directly lifted from the UK and applied to risks and hazards faced by South Korea. Therefore, cross-cultural synthesis of many national approaches to emergency management is further required particularly for customizing policy to the particular needs of Korea.

• Journal of the Society of Naval Architects of Korea
• /
• v.51 no.5
• /
• pp.380-387
• /
• 2014

Piper Alpha disaster drew attention to the damage likely to arise from explosions and fires on an offshore platform. And great concerns have been increased to prevent these hazards. Blast wall is one of the passive safety systems; it plays a key part of minimizing the consequences. However, a buckling due to explosion loads is a factor which can reduce the strength of blast wall. The buckling often occurs between web and flange at the center of blast wall. This study aims to find a solution for reinforcing its strength by installing a flat plate at the spot where the buckling occurs. First of all, ANSYS finite element method is adopted to numerically compute the structural resistance characteristic of blast wall by using a quasi-static approach. Sequentially, the impact response characteristics of blast wall are investigated the effect on thickness of flat plate by using ANSYS/LS-DYNA. Finally, pressure-impulse diagrams (P-I diagram) are presented to permit easy assessment of structural response characteristics of stiffened blast wall. In this study, effective use is made to increase structural intensity. of blast wall and acquired important insights have been documented.

• ETRI Journal
• /
• v.43 no.5
• /
• pp.900-908
• /
• 2021

This paper proposes thermometer-code latches having five and six transistors for unidirectional and bidirectional thermometer-code shift-registers, respectively. The proposed latches omit the set and reset transistors by changing from two supply voltage nodes to the set and reset signals in the cross-coupled inverter. They set or reset the data by changing the supply voltage to ground in either of two inverters. They reduce the number of transistors to five and six compared with the conventional thermometer-code latches having six and eight transistors, respectively. The proposed thermometer-code latches were simulated using a 65 nm complementary metal-oxide-semiconductor (CMOS) process. For comparison, the proposed and conventional latches are adapted to the 64 bit thermometer-code shift-registers. The proposed unidirectional and bidirectional shift-registers occupy 140 ㎛² and 197 ㎛², respectively. Their consumption powers are 4.6 ㎼ and 5.3 ㎼ at a 100 MHz clock frequency with the supply voltage of 1.2 V. They decrease the areas by 16% and 13% compared with the conventional thermometer-code shift-register.

• Proceedings of the KSRS Conference
• /
• 2007.10a
• /
• pp.14-17
• /
• 2007

To make use of surveying data obtained from different sensors and different techniques in a common reference frame, it is a pre-requite step to register them in a common coordinate system. For this purpose, we have developed a methodology to register IKONOS-2 Satellite Imagery using ALS data. To achieve this, conjugate features from these data should be extracted in advance. In the study, linear features are chosen as conjugate features because they can be accurately extracted from man-made structures in urban area, and more easily than point features from ALS data. Then, observation equations are established from similarity measurements of the extracted features. During the process, considering the characteristics of systematic errors in IKONOS-2 satellite imagery, the transformation function were selected and used. In addition, we also analyzed how the number of linear features and their spatial distribution used as control features affect the accuracy of registration. Finally, the results were evaluated statistically and the results clearly demonstrated that the proposed algorithms are appropriate to register these data.

• International Journal of Naval Architecture and Ocean Engineering
• /
• v.8 no.6
• /
• pp.519-529
• /
• 2016

The helideck structure must satisfy the safety requirements associated with various environmental and accidental loads. Especially, there have been a number of fire accidents offshore due to helicopter collision (take-off and/or landing) in recent decades. To prevent further accidents, a substantial amount of effort has been directed toward the management of fire in the safety design of offshore helidecks. The aims of this study are to introduce and apply a procedure for quantitative risk assessment and management of fires by defining the fire loads with an applied example. The frequency of helicopter accidents are considered, and design accidental levels are applied. The proposed procedures for determining design fire loads can be efficiently applied in offshore helideck development projects.

• Journal of Environmental Impact Assessment
• /
• v.18 no.5
• /
• pp.281-291
• /
• 2009

In Total Water Pollutant Load Management System of Korea, unit load approach based on land register data is currently used for the estimation of non-point pollutant load. However, a problem raised that land register data could not always reflect the actual land surface coverages which determine runoff characteristics of non-point pollution sources. As a way to overcome this, we tried to establish quantitative relationships between the aerial images (0.4m resolution) which reflect actual land surface coverages and the land registration maps according to the 19 major designated land-use categories in Kyeongan watershed. Analyses showed different relationships according to the land-use categories. Only a few land-use categories including forestry, road and river showed essentially identical and some categories such as orchard, parking lot and sport utility site showed no relationships at all between image data and land register data. Except for the two cases, all the other categories showed statistically significant linear relationships between image data and land register data. The analyses indicate that using high resolution aerial maps is a better way to estimate non-point pollutant load. If the aerial maps are not available, application of the linear relationships as conversion factors of land register data to image data could be an possible option to estimate non-point pollutant loads for the specific land-use categories in Kyeongan watershed.

• Journal of applied mathematics & informatics
• /
• v.39 no.5_6
• /
• pp.859-882
• /
• 2021

In the proposed paper, a new algorithm based on Nonlinear Feedback Shift Register (NLFSR) and modified RC4A (Rivest Cipher 4A) cipher is introduced. NLFSR is used for image pixel scrambling while modified RC4A algorithm is used for pixel substitution. NLFSR used in this algorithm is of order 27 with maximum period 2^27-1 which was found using Field Programmable Gate Arrays (FPGA), a searching method. Modified RC4A algorithm is the modification of RC4A and is modified by introducing non-linear rotation operator in the Key Scheduling Algorithm (KSA) of RC4A cipher. Analysis of occlusion attack (up to 62.5% pixels), noise (salt and pepper, Poisson) attack and key sensitivity are performed to assess the concreteness of the proposed method. Also, some statistical and security analyses are evaluated on various images of different size to empirically assess the robustness of the proposed scheme.

• Journal of the Korean Professional Engineers Association
• /
• v.34 no.4
• /
• pp.9-16
• /
• 2001

This paper is to represent the cross-border mobility of experienced Professional Engineers by establishing and maintaining an EMF International Register of Professional Engineers which is based on confidence in the integrity of national assessment system and a system of mutual recognition secured through continuing mutual inspection and evaluation of these systems. This paper would cover develop, monitor, maintain and promote mutually acceptable standards and criteria for facilitating the cross-border mobility of experienced Professional Engineers based on. Engineers Mobility Forum Agreement Sifted 25 June 2001, Thornybush. South Africa

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2009.05a
• /
• pp.164-167
• /
• 2009

In this paper, we propose the image encryption using LFSR(Linear Feedback Shift Register) and 2D CAT(Two-Dimensional Cellular Automata Transform). First, a LFSR is used to create a PN(pseudo noise) sequence, which is identical to the size of the original image. Then, the created sequence goes through a XOR operation with the original image to convert the original image. Next, the gateway value is set to produce a 2D CAT basis function. Using the created basis function, multiplication is done with the converted original image to process 2D CAT image encipherment. Lastly, the stability analysis verifies that the proposed method holds a high encryption quality status.

• Journal of the Korean Chemical Society
• /
• v.25 no.2
• /
• pp.103-109
• /
• 1981

An inexpensive, yet convenient analog storage device was constructed. Sequentially MOSFET-switched 20 sample and holds equipped with a high input impedance preamplifier were parallelly matched to the digitally controlled shift register system in variable speeds up to 3 kHz. To verify its usefulness, square wave train, sinusiodal wave and some electrochemical data, such as fast-scan voltammogram and transient current-time curves of differential pulse polarography were tested.