• 한국결정성장학회지
• /
• 제21권3호
• /
• pp.119-123
• /
• 2011

Carbon nanotilaments (CNFs) could be synthesized on nickel catalyst layer-deposited silicon oxide substrate using $C_2H_2$ and$H_2$ as source gases under thermal chemical vapor deposition system. By the incorporation of $SF_6$ as a cyclic modulation manner, the geometries of carbon coils-related materials, such as nano-sized coil and wave-like nano-sized coil could be observed on the substrate. The characteristics (formation density and morphology) of as-grown CNFs with or without $SF_6$ incorporation were investigated. Diameter size reduction for the individual CNFs-related shape and the enhancement of the formation density of CNFs-related material could be achieved by the incorporation of $SF_6$ as a cyclic modulation manner. The cause for these results was discussed in association with the slightly increased etching ability by $SF_6$ addition and the sulfur role in SF 6 for the geometry change.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2010년도 하계학술대회 논문집
• /
• pp.173-173
• /
• 2010

We proposed viewing angle switchable liquid crystal display(LCD) associated with fringe-field switching (FFS) mode with high aperture ratio characteristic. In the device, single pixel is separated into two regions, named as main pixel for displaying images and sub pixel for viewing angle control. In sub pixel region, add the common electrode on the top substrate and the initial alignment of liquid crystal is Hybrid Alignment Nematic (HAN) state. In conclusion, we suggested that the device has high aperture ratio characteristic because the LC directors are rotated in which viewing angle control region are generated fringe electric field.

• Bulletin of the Korean Chemical Society
• /
• 제32권12호
• /
• pp.4377-4381
• /
• 2011

In this study, real-time and label-free methods for monitoring the enzymatic reaction of urease, which releases ammonia through the hydrolysis of urea in an aqueous solution, were developed using a liquid crystal (LC)-based pH sensor. Nematic liquid crystal 4-cyano-4'-pentylbiphenyl (5CB), doped with 4'-pentyl-biphenyl-4-carboxylic acid (PBA), exhibited a shift in optical appearance from bright to dark when it was in contact with ammonia generated from the enzymatic reaction between urease and urea. This optical change was attributed to the anchoring transitions of LCs caused by hydrophobic interactions between the tails of deprotonted PBA ($PBA^-$) molecules and the LCs at the aqueous/LC interface. This novel technique holds great promise for the sensitive detection of urease along with its substrates and inhibitors.

• 한국결정성장학회지
• /
• 제16권3호
• /
• pp.106-111
• /
• 2006

The objective of this paper is to compare the surface features of two kinds of nano-porous activated carbon fiber (NPACF) treated with potassium and the variation of their properties by phosphoric acid pre-treatment. X-ray diffraction (XRD) patterns indicate that NPACF containing potassium species show better performance for potassium and potassium salts by pre-treatment with phosphoric acid. In order to present the causes of the differences in surface properties and specific surface area after the samples were treated with phosphoric acid, pore structure and surface morphology are investigated by adsorption analysis and SEM. For the chemical composition microanalysis for potassium loading of the NPACF pre-treated with phosphoric acid, samples were analyzed by EDX. Finally, the type and quality of oxygen groups are determined from the method proposed by Boehm.

• 한국결정성장학회지
• /
• 제14권1호
• /
• pp.27-32
• /
• 2004

RF-PECVD 방법을 이용하여 DLC(diamond-like carbon)박막을 메탄-수소 가스 혼합비 및 바이어스 전압에 따라 실리콘 웨이퍼 위에 증착하였다. DLC 박막의 결합구조적 특성 및 기계적 성질은 FT-IR, Raman, 그리고 nano-indenter를 이용하여 평가하였다. 혼합가스내 메탄의 유량과 바이어스 전압이 증가함에 따라 증착속도가 증가하였다. 박막내 탄소의 $sp^3/sp^2$ 결합비와 경도는 반응가스내 수소의 유량 및 바이어스 전압이 증가함에 따라 증가하였다.

• 소성∙가공
• /
• 제12권7호
• /
• pp.623-630
• /
• 2003

Nanomachining process, static nanoplowing, is one of the most promising lithographic technologies in terms of the low cost of operation and variety of workable materials. In nanomachining process, chemical effects are more dominant factor compared with those by physical deformation or fracture. For example, during the nanoscratch on a silicon surface in the atmosphere, micro protuberances are formed due to the mechanochemical reaction between diamond tip and the surfaces. On the contrary, in case of chemically stable materials, such as ceramic or glass, surface protuberances are not formed. The purpose of this study is to understand effects of the mechanochemical reaction between tip and surfaces on deformation behaviors of hard-brittle materials. Nanometerscale elasoplastic deformation behavior of single crystal silicon (100) was characterized with micro protuberance phenomena, and compared with that of borosilicate (Pyrex glass 7740). In addition, effects of the silicon protuberances on nanoscratch test results were discussed.

• 한국분말재료학회지
• /
• 제29권2호
• /
• pp.152-158
• /
• 2022

Thermoelectric materials can reversely convert heat and electricity into each other; therefore, they can be very useful for energy harvesting from heat waste. Among many thermoelectrical materials, SnSe exhibits outstanding thermoelectric performance along the particular direction of a single crystal. However, single-crystal SnSe has poor mechanical properties and thus it is difficult to apply for mass production. Therefore, polycrystalline SnSe materials may be used to replace single-crystal SnSe by overcoming its inferior thermoelectric performance owing to surface oxidation. Considerable efforts are currently focused on enhancing the thermoelectric performance of polycrystalline SnSe. In this study, we briefly review various enhancement methods for SnSe thermoelectric materials, including doping, texturing, and nano-structuring. Finally, we discuss the future prospects of SnSe thermoelectric powder materials.

• 한국전기전자재료학회논문지
• /
• 제35권6호
• /
• pp.562-567
• /
• 2022

Novel self-illuminated smart windows were fabricated consisting of Cu-doped ZnS (ZnS:Cu) powder and polymer-dispersed liquid crystal (PDLC). This smart window shows not only switchable transparency but also self-illumination without any attachable luminous body. Its electro-optical characteristics, transmittance, and luminance were investigated in relation to various applied voltages and composition ratios. The optical transmittance and luminous intensity increased with increasing applied voltages. However, the optical transmittance decreased with increasing ZnS:Cu powder content. One of the self-illuminated smart windows, which was fabricated with 9 wt% of ZnS:Cu, achieved the optical transmittance of 60.5% (at 550 nm) and the luminance of 11.0 cd/m² at 100 V. This smart window could be used as a normal switchable smart window in daytime and light-emitting signage at night.

• Bulletin of the Korean Chemical Society
• /
• 제32권11호
• /
• pp.3904-3908
• /
• 2011

A new octahedral Ru(III) complex with a tripodal tetraamine ligand, tpea = tris[2-(1-pyrazoyl)ethyl]amine, has been prepared and characterized. The single crystal X-ray crystallographic study of the complex revealed that the complex has a near octahedral geometry with the tetradentate ligand and two chloride ions. Peroxidase activity was examined by observing the oxidation of 2,2'-azinobis(3-ethylbenzothiazoline)-6-sulfonic acid (ABTS) with hydrogen peroxide in the presence of the complex. Amount of $ABTS^{+{\bullet}}$ generated during the reaction was monitored by UV/VIS and EPR spectroscopies. After the initiation of the peroxidase reaction, $ABTS^{+{\bullet}}$ concentration increases and then decreases after certain time, indicating that both ABTS and $ABTS^{+{\bullet}}$ are the substrates of the peroxidase activity of the Ru(III) complex.

• 한국진공학회지
• /
• 제12권4호
• /
• pp.288-292
• /
• 2003

Air hole 구조를 갖는 2차원 고분자 광결정 도파로를 나노 임프린트 방법으로 제작하기 위하여, e-beam lithography와 ICP etching 공정을 이용하여 기둥 구조를 갖는 실리콘 나노 마스터를 제작하였다. Air hole 구조를 갖는 광결정 구조를 얻기 위해, 실리콘 마스터 기둥의 형태를 4각형, 6각형, 12각형 및 원으로 설계하였다. 제작된 기둥의 직경과 구조를 CD-SEM과 SPM-AFM을 이용하여 측정하였으며, dose가 432 $\mu$C/$\textrm{cm}^2$일 때 최적의 dose임을 확인하였다.