• JSTS:Journal of Semiconductor Technology and Science
• /
• 제8권1호
• /
• pp.46-50
• /
• 2008

The effect of physicochemical properties of solvents on the microstructure of polyvinyl carbazole (PVK) film for non-volatile polymer memory was investigated. For the solubilization of PVK molecules and the preparation of PVK films, four solvents with different physicochemical properties of the Hildebrand solubility parameter and vapor pressure were considered: chloroform, tetrahydrofuran (THF), 1,1,2,2-tetrachloroethane (TCE), and N,N-dimehtylformamide (DMF). The solubility of PVK molecules in the solvents was observed by ultravioletvisible spectroscopy. PVK molecules were observed to be more soluble in chloroform, with a low Hildebrand solubility parameter, than solvents with higher values. The aggregated size and micro-/nano-topographical properties of PVK films were characterized using optical and atomic force microscopes. The PVK film cast from chloroform exhibited enhanced surface roughness compared to that from TCE and DMF. It was also confirmed that the microstructure of PVK film has an effect on the performance of non-volatile polymer memory.

• 한국전기전자재료학회논문지
• /
• 제20권5호
• /
• pp.394-398
• /
• 2007

A simple doping method to fabricate a very thin channel body of the nano-scaled n-type fin field-effect-transistor (FinFET) by arsenic solid-Phase-diffusion (SPD) process is presented. Using the As-doped spin-on-glass films and the rapid thermal annealing for shallow junction, the n-type source-drain extensions with a three-dimensional structure of the FinFET devices were doped. The junction properties of arsenic doped regions were investigated by using the $n^+$-p junction diodes which showed excellent electrical characteristics. The n-type FinFET devices with a gate length of 20-100 nm were fabricated by As-SPD and revealed superior device scalability.

• 한국재료학회지
• /
• 제16권5호
• /
• pp.308-311
• /
• 2006

The purpose of this study is to investigate the difference of the wafer nanotopography impact on the oxide-film thickness variation between the STI CMP using ceria slurry and STI CMP using fumed silica slurry. The nanotopography impact on the oxide-film thickness variation after STI CMP using ceria slurry is 2.8 times higher than that after STI CMP using fumed silica slurry. It is attributed that the STI CMP using ceria slurry follows non-Prestonian polishing behavior while that using fumed silica slurry follows Prestonian polishing behavior.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2006년도 하계학술대회 논문집 Vol.7
• /
• pp.26-27
• /
• 2006

To develop tera-bit level SONOS flash memories, SONOS unit memory and 64 bit flash arrays are fabricated. The unit cells have both channel length and width of 30nm. The NAND & NOR arrays are fabricated on SOI wafer and patterned by E-beam. The unit cells represent good write/erase characteristics and reliability characteristics. SSL-NOR array have normal write/erase operation. These researches are leading the realization of Tera-bit level non-volatile nano flash memory.

• 대한전기학회논문지:전기물성ㆍ응용부문C
• /
• 제50권12호
• /
• pp.639-647
• /
• 2001

We present an integrated optical microswitch, composed of silicon waveguides, gold-coaled silicon micromirrors, and electrostatic contact actuators, for applications to the optical signal transceivers. For a low switching voltage, we modify the conventional curled electrode microactuator into a electrostatic microactuator with touch-down beams. We fabricate the silicon waveguides and the electrostatically actuated micromirrors using the ICP etching process of SOI wafers. We observe the single mode wave propagation through the silicon waveguide with the measured micromirror loss of $4.18\pm0.25dB$. We analyze major source of the micromirror loss, thereby presenting guidelines for low-loss micromirror designs. From the fabricated microswitch, we measure the switching voltage of 31.74V at the resonant frequency of 6.89kHz. Compared to the conventional microactuator, the present contact microactuator achieves 77.4% reduction of the switching voltage. We also discuss a feasible method to reduce the switching voltage to 10V level by using the electrode insulation layers having the residual stress less than 30MPa.

• 대한전자공학회논문지SD
• /
• 제43권4호
• /
• pp.23-30
• /
• 2006

본 연구에서는 나노 스케일 MuGFET(Mutiple-Gate FETs)의 단채널 효과와 corner effect를 3차원 시뮬레이션을 통하여 분석하였다. 문턱전압 모델을 이용하여 게이트 숫자(Double-gate=2, Tri-gate=3, Pi-gate=3.14, Omega-gate=3.4, GAA=4)를 구하였으며 추출된 게이트 숫자를 이용하여 각각의 소자 구조에 맞는 natural length($\lambda$)값을 얻을 수 있었다. Natural length를 통하여 MuGFET의 단채널 효과를 피할 수 있는 최적의 소자 구조(실리콘 두께, 게이트 산화막의 두께 등)를 제시 하였다. 이러한 corner effect를 억제하기 위해서는 채널 불순물의 농도를 낮게 하고, 게이트 산화막의 두께를 얇게 하며, 코너 부분을 약 17%이상 라운딩을 해야 한다는 것을 알 수 있었다.

• 대한전자공학회논문지SD
• /
• 제45권11호
• /
• pp.1-7
• /
• 2008

본 연구에서는 양자 현상을 고려한 나노미터 MuGFET의 C-V 특성을 분석하기 위하여 2차원 Poisson-$Schr{\ddot{o}}dinger$ 방정식을 self-consisnt하게 풀 수 있는 시뮬레이터를 구현하였다. 소자 시뮬레이터를 이용하여 양자 현상으로 인한 소자크기와 게이트 구조에 따른 게이트-채널 커패시턴스 특성을 분석하였다. 소자의 크기가 감소할수록 단위 면적당 게이트-채널 커패시턴스는 증가하였다. 그리고 게이트 구조가 다른 소자에서는 게이트-채널 커패시턴스가 유효게이트 수가 증가할수록 감소하였다. 이런 결과를 실리콘 표면의 전자농도 분포와 인버전 커패시턴스로 설명하였다 또한 인버전 커패시턴스로부터 소자의 크기 및 게이트 구조에 따른 inversion-layer centroid 길이도 계산하였다.