• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 2003.06a
• /
• pp.632-635
• /
• 2003

As a process technology of nano pattern with a new conception for economic and practical technology of alternative nano process. process technologies such as Embossing, Imprinting. Molding and Inking are beginning to make its appearance. Among these alternative processes, nano mold process is a process that is of benefit to mass production and keeps excellency of reproduction and high quality of parts. In this study, we experienced micro precision machining technology of nano stamper for the injection mold of optical disk with big capacity. Especially, Flatness and uniformity are important for nano stamper with global area, for the purpose of developing polishing technology of micro precision of Back polishing only being used for nano stamper, we carried out a basic study to secure flatness standards

• Journal of the Korean Society for Precision Engineering
• /
• v.26 no.6
• /
• pp.30-35
• /
• 2009

• Proceedings of the KSME Conference
• /
• 2003.11a
• /
• pp.1921-1926
• /
• 2003

Nano-imprint technology has been vigorously studied by many researchers for it is one of the most promising technologies for manufacturing the pattern with its critical dimension below 100nm. In the nano-imprint technology, nano patterns are transferred on a polymer film and the transferred patterns are used as an etch mask to define the designed patterns on a substrate or a metal layer. To this end, it is important to keep the residual thickness of the imprinted polymer film uniform. In this study, a novel measurement technique to measure the residual thickness of films is proposed based on nanoindentation theory. This technique has advantages of saving time and measuring the residual thickness of highly-localized portions in comparison with other techniques, but has limitation of requiring calibration process.

• Transactions of the Korean Society of Machine Tool Engineers
• /
• v.15 no.6
• /
• pp.71-75
• /
• 2006

The application of focused ion beam (FIB) technology in micro/nano machining has become increasingly popular. Its usage in micro/nano machining has advantages over contemporary photolithography or other micro/nano machining technologies such as small feature resolution, the ability to process without masks and being accommodating for a variety of materials and geometries. The target of this paper is the analysis of FIB sputtering process according to tilt angle, dwell time and overlap for application of 3D micro and pattern fabrication and to find the effective beam scanning conditions using Taguchi method. Therefore we make the conclusions that tilt angle is dominant parameter for sputtering yield. Burr size is reduced as tilt angle is higher.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.5 no.3
• /
• pp.223-226
• /
• 2004

Injection molding using plastic materials was expected to mass production of structure with nano pattern for low cost phase. The PDMS mold was produced easily and uniformly by using thermal embossing. Quartz master for embossing method was made using electron beam lithography it had 100-500 nm size of line and dot type. The PDMS mold was produced after a brief hardening process and the master removal. The results show that various patterns are successfully fabricated the nano scale.. The replicated mold would be useful a stamper fabrication for injection molding.

• Proceedings of the Materials Research Society of Korea Conference
• /
• 2009.05a
• /
• pp.51.1-51.1
• /
• 2009

나노 임프린트 리소그래피 기술은 마스터 몰드 표면의 나노 패턴을 물리적인 가열, 가압 공정을 통해 기판 위의 고분자 층으로 전사시키는 기술이다. 이 기술은 기존의 노광 기술과는 다르게 직접적인 접촉을 통해 패턴을 형성하기 때문에 기능성 물질의 직접 패턴 형성이 가능한 기술이다. 투명 전극 재료는 다양한 분야으로의 응용이 가능하기 때문에 많은 연구가 진행되고 있다. ITO는 높은 투과율과 전도성 때문에 대표적인 투명 전극 물질로 사용되고 있다. 본 연구에서는 ITO nano particle solution을 이용하여 thermal 임프린팅 공정을 진행해 ITO nano pattern을 형성하는 연구를 진행하였고 이와 같은 기술을 이용하여 glass와 LED 기판에 ITO nano pillar pattern을 제작하였고 이를 주사 전자 현미경과 UV/vis를 이용하여 형성된 나노 ITO 나노 패턴의 구조와 광학적 특성을 분석하였다.

• Proceedings of the KSME Conference
• /
• 2007.05a
• /
• pp.1532-1536
• /
• 2007

A plastic substrate with tiny rectangular pillars less than 100nm is injection molded to study pattern replication in injection molding. The size of the substrate is 50mm ${\times}$ 50mm and 1mm thick. The substrate has 9 patterned areas of which size is 2mm ${\times}$ 2mm respectively. The lengths of the pillars are 50nm, 100nm, 150nm and 200nm and the width and height are 50nm and about 100nm respectively. A pattern master is fabricated by e-beam writing using positive PR(photo resist) and then a nickel stamper replicated from the PR master by nickel electro-plating. Cr is deposited on the PR pattern master before nickel electro-plating as a conducting layer. Using this nickel stamper, several injection molding experiments are done to investigate effects of the injection molding parameters such as mold temperature, injection rate, packing pressure or pattern location on the replication of the patterns under 100nm.

• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 2013.05a
• /
• pp.143-144
• /
• 2013

• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 2010.05a
• /
• pp.297-298
• /
• 2010

• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 2013.05a
• /
• pp.613-614
• /
• 2013