• 한국신재생에너지학회:학술대회논문집
• /
• 2010.11a
• /
• pp.106.1-106.1
• /
• 2010

본 연구는 팜 부산물로부터 바이오 에탄올을 생산하는 전처리-당화-발효 공정의 첫 번째 단계인 전처리 공정에서 팜 부산물을 NaOH를 이용하여 효율적으로 전처리하고자 하였다. 암모니아 침지법과 NaOH 침출법을 비교한 결과 팜 부산물에 대해서는 암모니아 침지에 의한 탈리그닌 효과가 적으며 NaOH 전처리가 적합한 방법임을 알 수 있었다. 40-100 mesh 크기의 팜 부산물을 이용하여 반응온도(110, 130, $150^{\circ}C$), 반응시간(20, 40, 60분) 및 NaOH 농도(5%, 11%)의 변화에 따른 팜 부산물의 탈리그닌율과 글루코스 및 자일로스 회수율 간의 상호관계를 확인하였다. $150^{\circ}C$까지의 온도 조건에서 온도에 의한 자일로스의 분해는 일어나지 않는 것으로 확인되었다. 팜 부산물의 탈리그닌율은 시간이 증가할수록 증가하였으며, 높은 NaOH 농도에서 더 높은 것으로 나타났다. 그러나 글루코스 및 자일로스의 회수율은 높은 농도에서 낮게 나타났으며, 시간이 지날수록 감소하여 손실이 많은 것으로 나타났다. 따라서 NaOH 농도가 낮을수록 당 회수율은 높게 나타나지만, 탈리그닌율이 낮아 당화 효율이 떨어지므로 효소 당화 후에 최종 당 회수율이 높은 NaOH 농도 조건을 결정하여야 하겠다.

• Journal of the Korean Society of Clothing and Textiles
• /
• v.26 no.12
• /
• pp.1749-1755
• /
• 2002

본연구의 목적은DP가공에 의한 가교화를 통해 텐셀의 피브릴화를 조절할 때 DP가공 방법 및 NaOH전처리 효과를 물성, 표면형태, 역학적 성질 및 태의 변화의 관점에서 고찰하는데 있다. SEM 분석결과DP가공에 의해 피브릴 발생 정도는 감소하였다. DP가공 방법에 있어 서 WF법과 PDC법에 따른 물성의 차이는 나타나지 않았다. 역학적특성의 경우 DP가공은 DP가공 방법에 상관없이 효소처리한 직물의 인장선형성에는 큰 영 향을 주지 않았으나 인장에 너지, 굽힘 강성, 압축선형성, 압축 레질리언스, 기하학적 거칠기는 감소시켰고 인장 레질리언스, 굽힘이력, 압축에너지는 증가시켰다. 전단특성은 WF법에서는 증가한 반면, PDC법에서는 감소하여 DP가공 방법에 따른 차이를 나타내었다. WF법이 PDC법보다 더 높은 Koshi, Numeri, Fukurami 값을 보였으며, 종합태 값은 비슷하게 나타났다. NaOH 전처 리에 의해 수지부착량은 감소하였으나 감량률은 증가하였으며, DP성/물성은 더 낮게 나타났다. NaOH 전처리에 의해 인장선형성, 인장에너지, 압축 레질리언스, 전단 및 굽힘특성은 증가하였으나 인장레질리언스와 압축선형성, 압축에너지, 표면특성은 감소하였다. NaOH 전처리한 경우 Koshi는 증가하였고, Numrei와 Fukuramil는 감소하였으며, 종합태 값은 가장 낮았다. 처리한 시료들은 각각 다른 감성과 촉감을 나타냈다.

• Proceedings of the Korean Environmental Sciences Society Conference
• /
• 2006.05a
• /
• pp.304-306
• /
• 2006

본 연구에서는 하수슬러지의 감량화 방안으로 초음파-알칼리 전처리를 통한 하수슬러지의 가용화 특성과 전처리된 하수슬러지의 비메탄활성도(SMA) 실험을 통한 메탄가스 발생 특성을 살펴본 결과 다음과 같은 결론을 얻을 수 있었다. 하수슬러지의 전처리에서 초음파와 알칼리의 단독 전처리보다는 초음파-알칼리 전처리의 경우, 또한 단일주파수 초음파보다는 이중주파수 초음파의 경우 SCOD 가용화율과 처리시간에 있어 더 효과적임을 알 수 있었다. 알칼리(40meq/L NaOH), 초음파(15, 20, 15+20kHz), 알칼리와 초음파 전처리시(15, 20, 15+20kHz with 40meq/L NaOH)시 반응시간 45분에서 하수슬러지의 세포파괴도가 가장 높게 나타난 것은 알칼리(40meq/L NaOH)와 이중주파수 초음파 15+20kHz 전처리로 조사되었으며, 이때 세포파괴도는 98.7%로 나타났다.

• Korean Chemical Engineering Research
• /
• v.54 no.3
• /
• pp.431-435
• /
• 2016

The aim of this study was to investigate the effect of gamma irradiation on the pretreatment of wood chips with NaOH solution. The degree of saccharification was quantified by measuring reducing sugar and glucose concentrations after enzymatic hydrolysis. After pretreatment with 10 g/L NaOH, the wood chips were irradiated at the doses of 0, 50, 100, and 200 kGy, respectively. Among the irradiated samples, wood chips irradiated at the dose of 200 kGy had the highest reducing sugar concentration of 12.2 g/L. Also, to define the effect of irradiation before pretreatment, the wood chips were first gamma-irradiated and then pretreated with NaOH. When the NaOH treatment was conducted after irradiation at 200 kGy, the reducing sugar content was further increased to 13.4 g/L and glucose content of the wood chip was as high as 7.9 g/L. These results suggest that gamma irradiation may be the promising method for pretreatment of cellulose biomass.

• Korean Chemical Engineering Research
• /
• v.61 no.2
• /
• pp.265-272
• /
• 2023

Lignocellulosic biomass is essential to pretreatment because of having rigid structures and a lot of lignin. Among methods of pretreatment, using THF solvents has the advantage of being easy to reuse. THF (Tetrahydrofuran) used as a co-solvent with water or ionic solvent that is inexpensive and can remove lignin over a wide range of reaction conditions. NaOH (Sodium hydroxide) has been demonstrated to preferentially solvate lignin from cellulose. Thus, NaOH was used as a pretreatment co-solvent for the fractionation of lignin by destroying the ether bond to amend for hydrolysis and expand the surface area of cellulose and hemicellulose. In this experiment, lignin was removed by the NaOH/THF co-solvent pretreatment process to characteristics for the pretreatment and obtain the optimal levulinic acid conversion yield through the acid catalyst conversion process. the NaOH/THF co-solvent system was conducted in various ratios of co-solvent under a total of 16 conditions. And the temperature was 180 ℃ during to 60 mins. The optimum condition of co-solvent is NaOH 5 wt%/THF 90:10(v/v%), 76.8% glucan content was obtained through this co-solvent pretreatment, and 90.1% lignin was removed. In the acid catalyst conversion process, which is a subsequent pretreatment process, the experiment was conducted under the conditions of 30 to 90 min of reaction time and 160 ℃ to 200 ℃ reaction temperature. The optimum condition of acid catalyst conversion process is 60min reaction time under of 180 ℃, and it obtained 84.7% of levulinic aicd conversion yield.

• Korean Chemical Engineering Research
• /
• v.50 no.1
• /
• pp.18-24
• /
• 2012

Lignocellulose is difficult to hydrolyze due to the presence of lignin and the technology developed for cellulose fermentation to ethanol is not yet economically viable. However, recent advances in the extremely new field of biotechnology for the ethanol production are making it possible to use of Agriculture residual biomass, e.q., Barley straw, because of their several superior aspects as Agriculture residual biomass; low lignin, high contents of carbohydrates. Barley straw consists of 39.78% cellulose (glucose), 22.56% hemicelluloses and 19.27% lignin. Pretreatment of barley straw using NaOH pretreatment solutions concentration with 2%, temperature $85^{\circ}C$ and reaction times 1 hr were investigates. $NH_4OH$ pretreatment condition was solutions concentration with 15%, temperature $60^{\circ}C$, and reaction times 24hr were investigates. Furthermore, enzymatic saccharification using cellulose at $50^{\circ}C$, pH 4.8, 180 rpm for conversion of cellulose contained in barley straw to monomeric sugar. The pretreatment of barley straw using NaOH and $NH_4OH$ can significantly improve enzymatic saccharification of barley straw by extract more lignin and increasing its accessibility to hydrolytic enzymes. The result showed NaOH pretreatment extracted yield of lignin was 24.15%. $NH_4OH$ pretreatment extracted yield of lignin was 29.09%. Shaccharification of barley straw pretreatment by NaOH for 72hr and pH 4.8 result in maximum glucose concentration 15.39g/L (58.40%) and by $NH_4OH$ for 72hr and pH 4.8 result in maximum glucose concentration 16.01g/L (64.78%).

• Journal of Energy Engineering
• /
• v.23 no.3
• /
• pp.241-246
• /
• 2014

This study is to compare characteristics of saccharification reactions applying to enzymatic hydrolysis of pretreated fallen leaves for bio-ethanol production. It experimented pretreatment of acid, alkaline in the chemical. This experiment includes preteatment of acid and alkaline in chemical, soaking, shaking and autoclaving method, which were applied to biomass. In result, the glucose production from alkaline-NaOH method was 263 mg glucose/ g biomass comparing with them of acid-HCl method. Thus, alkaline-NaOH method is superior than the acid-HCl method for chemical preteatment of fallen leaves. Also, when various chemical treatments were compared, they were all. Based on the results of this study, we found that leaves, one of biomass, are possible in pretreatment and enzymatic hydrolysis process, and they are likely to affect bio-ethanol production in the future.

• Journal of the Korea Organic Resources Recycling Association
• /
• v.30 no.4
• /
• pp.27-40
• /
• 2022

In this study, the anaerobic digestion potential and thermo-chemical pre-treatment were evaluated for efficient anaerobic co-digestion of dewatered sludge(DS) and food waste(FW). As a result, the degradable organic matter concentration and methane yield of FW were evaluated to 2.2 and 1.3 times higher than that of DS, respectively. In order to increase the amount of biogas production, it was determined that it is desirable to increase the mixing ratio of FW. The efficiency of thermo-chemical pre-treatment was evaluated for the reaction temperature, NaOH concentration, reaction time and mixture ratio. As a result of evaluation through pre-treatment efficiency and dehydration capacity, the optimum pre-treatment conditions were evaluated as follows: reaction temperature 140℃, NaOH concentration 60 meq/L, reaction time 60 min, mixture ratio 1:5(DS:FW). The gas production rate and methane yield increased 1.6 and 1.5 times, respectively, compared to before and after applying the optimum pre-treatment. Therefore, it is necessary to increase the mixing ratio of food waste for efficient anaerobic co-digestion of DS and FW. and it is necessary to increase the solubilization efficiency of waste by application of pre-treatment.

• Proceedings of the KAIS Fall Conference
• /
• 2011.05a
• /
• pp.513-516
• /
• 2011

본 연구에서 NaOH, Acetic acid, Silane 처리는 천연섬유와 matrix간의 계면 결합에 불리하게 작용하는 wax, lignin, hemicellose 등을 제거하기 위한 방법 중의 하나이다. 이러한 화학적 처리에 따른 왕겨분말의 형태학적 변화와 열적특성 변화를 관찰하였다. 전처리 조건으로 농도는 1.5%, 3%, 9%이며 각각 30min, 60min, 90min을 처리하였다. 처리하지 않은 왕겨 분말과 NaOH, Acetic acid, Silane 처리를 한 왕겨 분말의 성분을 Energy dispersive spectroscopy(EDS)로 분석하였으며, Scaning electron microscopy(SEM)으로 표면을 관찰하였다. 표면의 상태가 NaOH, Acetic acid, Silane 처리를 하였던 왕겨 분말이 처리를 하지 않았던 왕겨 분말보다 비교적 깨끗해지고, 크랙이 발생함을 확인하였다. 또한 전처리가 된 상태에서 수분흡수율을 측정하고, 처리를 하지 않은 왕겨 분말과 NaOH, Acetic acid, Silane 처리를 한 왕겨 분말을 Thermogravimetric Analysis(TGA)로 열분석을 실시하였다.

• Journal of Korean Society of Environmental Engineers
• /
• v.29 no.8
• /
• pp.930-937
• /
• 2007

Korean pine(Pinus densiflora) bark was evaluated for its adsorption capacity of Cu(II) ions from aqueous solution by running a series of batch experiments. Prior to the tests, the milled barks were treated with 1 N NaOH or 1 N HCl to examine the effect of surface modification. For comparison, untreated bark was tested under same condition. Within the tested pH range between 3 and 6, NaOH treatment increased Cu(II) adsorption capacity by $139\sim184%$, while HCl treatment decreased it by $37\sim42%$. Maximum copper ion uptake by bark was observed at pH $5\sim6$, but pH of solution was not a potent influence. A pseudo second-order kinetic model fitted well for the sorption of copper ion onto bark. For NaOH-treated bark, the calculated sorption capacity$(q_e)$ increased from 6.58 to 12.77 mg/g, while the equilibrium rate constant$(k_2)$ decreased from 0.284 to 0.014 g/mg/min as initial Cu(II) concentration doubled from 100 mg/L. A batch isotherm test using NaOH-treated bark showed that equilibrium sorption data were represented by both the Langmuir model and the Freundlich model. It was confirmed that carboxylic acid of bark was involved in the Cu(II) adsorption. For NaOH-treated bark, in particular, carboxylate ion produced by hydrolysis or saponification appeared to be a major functional roup responsible for the enhanced Cu(II) sorption.