• Proceedings of the Korean Institute of Surface Engineering Conference
• /
• 2017.05a
• /
• pp.151.2-151.2
• /
• 2017

본 연구에서는 정전류 조건에서 알루미늄 합금의 PEO(Plasma Electrolytic Oxidation) 피막 형성 거동에 미치는 전해질 내 cation($K^+$, $Na^+$)의 영향을 아크 발생 양상, 전압-시간 곡선 및 형성된 표면피막 구조를 관찰하여 연구하였다. 전해질은 0.5 M NaOH + 1 M $Na_2SiO_3$ 수용액과 0.5 M KOH + 1 M $Na_2SiO_3$ 수용액이 사용되었다. 아크 발생은 cation의 종류에 상관없이 동일하게 가장자리부터 시작되어 내부로 이동함으로써 전 표면에 걸쳐서 일어났다. 전 표면에서 PEO 피막이 형성된 이후에는 한 지점에서 지속적으로 아크가 발생하는 로컬버닝 현상이 두 용액에서 모두 관찰되었으나 $K^+$이온이 포함된 용액에서 로컬버닝이 빠르게 일어났다. 시편표면에서 아크가 발생하는 동안 중 각 전해액에서의 전압-시간 곡선에서 전압의 상승과 하강이 반복되는 거동이 동일하게 관찰되었다. 이러한 전압 등락의 크기는 $K^+$ 이온이 포함된 수용액에서 더 크게 나타났으며, 그 결과 표면 거칠기가 상대적으로 더 높은 PEO 피막이 형성되었다.

• Journal of the Korean Chemical Society
• /
• v.17 no.1
• /
• pp.47-52
• /
• 1973

Korean bentonite was treated with aqueous NaOH solution under the reaction conditions such as concentration of NaOH, 0.5-6N; ratio of $Na_{2}O$ to $SiO_2$, 1-4; reaction time, 2-30 days; reaction temperature, $70^{\circ}C-90^{\circ}C$. The products were examined by X-ray diffraction patterns. When it was treated with 2N NaOH at $70^{\circ}C$, zeolite species $P_1$ was formed with good yield. In higher concentration and at higher temperature than above, zeolite species $P_1$ was converted to hyeroxysodalite. Together with these crystals, some faujasite type zeolite, sodium A zeolite, mordenite type zeolite etc. was formed depending upon reaction conditions.

• Proceedings of the Korean Nuclear Society Conference
• /
• 1998.05b
• /
• pp.78-83
• /
• 1998

Alloy 600과 Alloy 690의 응력부식파괴(Stress corrosion cracking, SCC)에 미치는 TiO$_2$의 영향을 315$^{\circ}C$의 10%NaOH 수용액에서 RUB(reverse U-bend) 시편, C-Ring 시편과 CT(compact tension)시편을 사용하여 평가하였다. 시편은 alloy 600 MA(mill anneal), alloy 600 TT(thermal treatment) 그리고 alloy 690 TT로 제작하였다. SCC 시험은 탈산된 10%NaOH 수용액에 2 g/1 TiO$_2$를 첨가한 용액과 첨가하지 않은 용액에서 수행하였으며, 이 조건에서 분극곡선도 얻었다. SCC 시험시 시편을 부식전위로부터 +150 ㎷ 양극분극을 가하였다. 기준전극으로 external Ag/AgCl electrode를 사용하였다. Alloy 600 MA로 제작한 RUB 시편은 TiO$_2$가 없는 용액에서 5일 안에 벽 관통 균열을 보였으나 TiO$_2$가 첨가된 용액에서는 균열을 관찰할 수 없었다. TiO$_2$가 첨가됨에 따라 alloy 600과 alloy 690의 임계전류밀도는 크게 감소하였고 또한 부동태 전류밀도도 감소하였다. 부동테 영역에서 TiO$_2$가 있는 용액의 경우 여러 peak가 있는 반면에 TiO$_2$가 없는 용액은 peak가 뚜렷하지 않았다. 이런 결과는 TiO$_2$가 첨가점에 따라 active region에서도 안정한 부동태 피막이 존재한다는 것을 시사한다. 또한 TiO$_2$가 없는 경우 SCC가 잘 일어나는 영역에 존재하는 부동태 피막이 TiO$_2$ 첨가에 따라 repassivation kinetics 등의 성질이 변화한 것으로 판단된다.

• Proceedings of the Korean Institute of Surface Engineering Conference
• /
• 1998.05a
• /
• pp.109-109
• /
• 1998

• Proceedings of the KIEE Conference
• /
• 1998.07d
• /
• pp.1500-1502
• /
• 1998

Electro Discharge Machining (EDM) is a so-call nonconventional machining technique. This paper presents the experimental results of an EDM technique for the fabircation of microholes on #7440 pyrex glass substrates. With various applied voltages and various concentration of NaOH or KOH solution, the glass substrates have been microdrilled using the copper electrodes of which diameters are 250 ${\mu}m$ to 450 ${\mu}m$. The machined throughholes have been observed the top diameter, the bottom diameter and machining time have been measured. EDM in NaOH solution causes the fabrication to have better the surface condition, higher selective of electrode, lower concentration of solution with respect to EDM in KOH solution machined fabrication.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 1998.06a
• /
• pp.427-430
• /
• 1998

Electro Discharge Machining (EDM) is a so-call non-conventional machining technique. This paper presents the experimental results of an EDM technique for the fabrication of microholes on #7440 pyrex glass substrates. With various applied voltages and at various concentration of NaOH solution, the glass substrates have been microdrilled using the copper electrodes of which diameters are 250 $\mu\textrm{m}$ to 450 $\mu\textrm{m}$. The machined throughholes have been observed the top diameter, the bottom diameter and machining time have been measured. The experimental results show that the machining time decreases as the concentration of NaOH solution increases, the applied voltage increases and the needle diameter decreases. Also, the top diameter increases as the needle diameter increases or the applied voltage increases. The bottom diameter decreases as the needle diameter decreases or the applied voltage decreases.

• Proceedings of the Korean Nuclear Society Conference
• /
• 1998.05b
• /
• pp.136-141
• /
• 1998

재결정된 Zircaloy-4 합금을 35$0^{\circ}C$ 의 여러가지 알칼리 금속 수산화물 수용액에서 부식시켜 동일한 무게증가량을 갖도록 조절한 뒤, 1M H$_2$SO$_4$ 용액에서 그 시편에 대한 임피던스 특성을 분석하였다. LiOH, NaOH, KOH 순서로 알칼리 금속의 이온반경이 클수록 수소이온의 이동에 대한 임피던스가 증가함에 따라 산화막을 통한 수소이온의 흡수가 점차로 어려워졌다. 이것은 Zr$^4$$^{+}$와 이온반경이 비슷한 알칼리 금속 수용액 조건에서 얻은 부식시편은 open grain boundary 와 equiaxed microstructure의 산화막을 갖기 때문이었고, 반면에 Zr$^4$$^{+}$와 이온반경의 차이가 큰 알칼리 금속 수용액 조건에서 얻은 부식시편은 compact 한 columnar microstructure의 산화막을 갖기 때문인 것으로 생각된다.

• Korean Journal of Crystallography
• /
• v.12 no.2
• /
• pp.97-101
• /
• 2001

Phillipsite-type zeolite powders were synthesized from domestic coal fly ash by hydrothermal reaction with 2.0 M-3.5M NaOH solution at $80^{\circ}C{\sim}120^{\circ}C$ for 24 h. The properties of zeolite were investigated by XRD, SEM and IR spectroscopy. The effects of chemical composition of fly ash, reaction temperature and NaOH concentration on the zeolite synthesis were well appeared on IR spectra. It is found that the $TO_4$(T=Si, Al) tetrahedra have a well ordered structure as the $SiO_2$ content, synthesis temperature and NaOH concentration become high.

• Journal of the Korea institute for structural maintenance and inspection
• /
• v.24 no.3
• /
• pp.87-95
• /
• 2020

As an experimental study on the corrosion behavior of steel materials to which ATMS method using EIS was applied in concrete, immersion of Ca(OH)₂ saturated aqueous solution and NaCl aqueous solution simulating the environment inside concrete The corrosion behavior was tested. The equivalent circuit was derived through the analysis of the Nyquist plot, and the interfacial resistance and the polarization resistance of the Ca(OH)₂ aqueous solution were compared, and Al ATMS was the best interfacial resistance and Zn ATMS was the best polarization resistance. After burying ATMS steel material of cement mortar, the initial immersion impedance measurement value was the highest in the Zn ATMS test body in the impedance measurement by the immersion time by immersing it in the NaCl aqueous solution. Al ATMS test piece has the highest impedance and is highly reliable. This is because Al, which has a high ionization tendency, is continuously oxidized in a strong alkaline environment to form a film and protect the steel from permeation of chlorine ions.

• Journal of the Korean Wood Science and Technology
• /
• v.45 no.1
• /
• pp.126-138
• /
• 2017

This study was conducted to investigate the potential of chicken feather (CF), which is a by-product in poultry industry, as a raw material of wood adhesives. For the purpose, adhesive resins were formulated with NaOH- and $H_2SO_4$-hydrolyzed CF as well as crosslinkers, and then the properties and water resistance of the adhesive resins against hot water were measured. CF was made of mainly keratin-type protein, and no or very low content of heavy metals was detected. Hydrolysis rate of CF increased as NaOH concentration in hydrolysis solutions increased. However, in order to minimize the loss of adhesive property of protein itself by the severe hydrolysis of CF and to seek its proper hydrolysis conditions, NaOH concentrations in hydrolysis solution determined to adjust to 5%, 7.5% and 10%. In the NaOH-hydrolyzed CF, $H_2SO_4$-hydrolyzed CF as a hardener and crosslinker were added to formulate CF-based adhesive resins. Solid content of the resins ranged from 28.3% to 44.8% depending on hydrolysis conditions and type of crosslinker. Viscosity of the resins at $25^{\circ}C$ was very high. However, when the temperature of the resins was increased to $50^{\circ}C$, the viscosity decreased greatly and thus the resins could be applied as a sprayable resin. Retention rate measured to evaluate the water resistance of adhesive resins was the highest in the cured resin formulated with 5% NaOH-hydrolyzed CF and 5% $H_2SO_4$-hydrolyzed CF of 10% based on the solid weight as a hardener. Retention rate depending on crosslinkers added into adhesive resins was the highest phenol-formaldehyde (PF) followed by melamine-urea-formaldehyde (MUF) and formalin. The retention rate of CF-based adhesives formulated with 5% NaOH-hydrolyzed CF, PF and $H_2SO_4$-hydrolyzed CF of 10% and over did not differ statistically from that of commercial MUF resins. All of CF-based adhesives formulated with PF as a crosslinker and one with 5% NaOH-hydrolyzed CF of 55%, 5% $H_2SO_4$-hydrolyzed CF of 15%, and MUF of 30% on the basis of solid weight could be substituted for commercial urea-formaldehyde resins, From the results, CF can be used as a raw material of wood adhesives if hydrolyzed in proper conditions.