• Journal of Korean Tunnelling and Underground Space Association
• /
• v.22 no.4
• /
• pp.347-365
• /
• 2020

In order to resolve traffic problems in urban areas and to increase the area of green spaces, tunnels in downtown areas are being increased. Additionally, the application of large port smoke extraction ventilation systems is increasing as a countermeasure to smoke extraction ventilation for tunnels with high potential for traffic congestion. It is known that the smoke extraction performance of the large port smoke extraction system is influenced not only by the amount of the extraction flow rate, but also by various factors such as the shape of the extraction port (damper) and the extraction air velocity through a damper. Therefore, in this study, the design standards and installation status of each country were investigated. When the extraction air flow rate was the same, the smoke extraction performance according to the size of the damper was numerically simulated in terms of smoke propagation distance, compared and evaluated, and the following results were obtained. As the cross-sectional area of the smoke damper increases, the extraction flow rate is concentrated in the damper close to the extraction fan, and the smoke extraction rate of the damper in downstream decreases, thereby increasing the smoke propagation distance on the downstream side. In order to prevent such a phenomenon, it is necessary to reduce the cross-sectional area of the smoke damper and increase the velocity of passing air through the damper so that the pressure loss passing through the damper increases, thereby reducing the non-uniformity of smoke extraction flow rate in the extraction section. In this analysis, it was found that when the interval distance of the extraction damper was 50 m, the air velocity passing through damper was 4.4 m/s or more, and when the interval distance of the extraction dampers was 100 m, the air velocity passing through damper was greater than 4.84 m/s, it was found to be advantageous to ensure smoke extraction performance.

• Development and Reproduction
• /
• v.10 no.2
• /
• pp.105-113
• /
• 2006

Reactive oxygen species(ROS) generated in cellular metabolism have an effect on cell maturation and development. In human reproductive tract, oxidative injury by ROS may induce female infertility. Also, oxidative injury may be responsible for developmental retardation and arrest of mammalian preimplantation embryos. Activating transcription factor 4(ATF4) is a member of the cyclic-AMP response element-binding(CREB) familiy of basic region- leucine zipper(bZip). ATF4 is known to regulate stress response to protect cell from various stress factors and inducer of apoptisis. The purpose of this study was to investigate whether ATF4 is involved in the defensive mechanism in oxidative stress condition during the development of mouse preimplantation embryos. To verify the expression of ATF4 in oxidative stress condition, 2-cell stage embryos were cultured in HTF media containing 0.1mM, 0.5mM or 1mM hydrogen peroxide($H_2O_2$) for 1hr(2-cell), 8hr(4-cell), 17hr(8-cell), 24hr(morula), 48hr(early blastocyst) or 64hr(late blastocyst). The developmental rate decreased in the 0.1mM $H_2O_2$ treated group compared with control group. In embryos treated with 0.5mM and 1mM $H_2O_2$ showed 2-cell block. As a results of the semi-quantitative RT-PCR analysis of SOD1, ATF4 and Bax gene expression, SOD1, ATF4 and Bax genes were increased in 0.1mM, 0.5mM, 1mM $H_2O_2$ treated groups compared with control group. In 2-cell embryos, expression of SOD1, ATF4 and Bax genes were notably increased in 0.1mM, 0.5mM, 1mM $H_2O_2$ treated groups compared with control group. Immunofluorescence analysis showed that ATF4 protein was localized at the cytoplasm of preimplantation embryos. The increase in ATF4 immunoreactivety was observed in the 0.1mM, 0.5mM, 1mM $H_2O_2$ treated groups compared with control group. It suggests that oxidative stress by $H_2O_2$ induces expression of ATF4 and may be involved in protection mechanism in preimplantation embryos from oxidative injury.

• Economic and Environmental Geology
• /
• v.12 no.1
• /
• pp.41-49
• /
• 1979

A literature review is made on the physical and chemical characteristics of clay minerals in acidic solutions from the mineralogical and hydrometallurgical viewpoints. Some of the important characteristics of clays are their ability to cation exchange, swelling, and incongruent dissolution in acidic solutions. Various clay minerals can take up metallic ions from solution via cation exchange mechanism. Generally, cation exchange capacity increases in the following order : kaolinite, halloysite, illite, vermiculite, and montmorillonite. In acidic solutions, the cation uptake such as copper by clay minerals is strongly inhibited by hydrogen and aluminum ions and thus is not economically significant factor for recovery of metals such as uranium and copper. In acidic solutions, the cation uptake is substial. Swelling is minimal at lower pH, possibly due to lattice collapse. Swelling may be controllable with montmorillonite type clays by exchanging interlayer sodium with lithium and/or hydroxylated aluminum species. The effect of add on clay minerals are : 1. Division of aggregates into smaller plates with increase in surface area and porosity. 2. Clay-acid reactions occur in the following order: (i) $H^+$ replacement of interlayer cations, (ii) removal of octahedral cations, such as Al, Fe, and Mg, and (iii) removal of tetrahedral Al ions. Acid attack initiates, around the edges of the clay particles and continued inward, leaving hydrated silica gel residue around the edges. 3. Reaction rates of (ii) and (iii) are pseudo-1st order and proportional to acid concentration. Rate doubles for every temperature increment of $10^{\circ}C$. Implications in in-situ leaching of copper or uranium with acid are : 1. Over the life span of the operation for a year or more, clays attacked by acid will leave silica gel. If such gel covers the surface of valuable mineral surfaces being leached, recovery could be substantially delayed. 2. For a copper deposit containing 0.5% each of clay minerals and recoverable copper, the added cost due to clay-acid reaction is about 1.5c/lb of copper (or 0.93 lbs of $H_2SO_4/1b$ of copper). This acid consumption by clay may be a factor for economic evaluation of in-situ leaching of an oxide copper deposit.

• Economic and Environmental Geology
• /
• v.53 no.1
• /
• pp.1-9
• /
• 2020

Magnesium silicate minerals such as serpentine [Mg₃Si₂O₅(OH)₄] have a high potential for the sequestration of CO₂; thus, their reactivity toward dissolution under CO₂-free and CO₂-containing conditions in acidic solvents is a critical process with respect to their carbonation reactions. To examine the carbonation efficiency and dissolution mechanism of serpentine, hydrothermal treatment was performed to the starting material via a modified direct aqueous carbonation process at 100 and 150℃. The serpentine dissolution experiments were conducted in H₂SO₄ solution with concentration range of 0.3-1 M and at a CO₂ partial pressure of 3 MPa. The initial pH of the solution was adjusted to 13 for the carbonation process. Under CO₂-free and CO₂-containing conditions, the carbonation efficiency increased in proportion to the concentration of H₂SO₄ and the reaction temperature. The leaching rate under CO₂-containing conditions was higher than that under CO₂-free conditions. This suggests that shows the presence of CO₂ affects the carbonation reaction. The leaching and carbonation efficiencies at 150℃ in 1 M H₂SO₄ solution under CO₂-containing conditions were 85 and 84%, respectively. The dissolution rate of Mg was higher than that of Si, such that the Mg : Si ratio of the reacted serpentine decreased from the inner part (approximately 1.5) to the outer part (less than 0.1). The resultant silica-rich layer of the reaction product ultimately changed through the Mg-depleted skeletal phase and the pseudo-serpentine phase to the amorphous silica phase. A passivating silica layer was not observed on the outer surface of the reacted serpentine.

• Horticultural Science & Technology
• /
• v.33 no.4
• /
• pp.501-510
• /
• 2015

In this study, we investigated the onset and release of endo-dormancy under natural conditions by observing bud break characteristics in 'Fuji' apple trees using water cuttings. Through examinations of bud break rate and days to bud break, we found that the endo-dormancy of 'Fuji' apple tree continues for 70 d from 165 to 255 d after full bloom (DAFB), from late October to early January of the following year. In addition, within 20 d of first bud break, based on a final bud break rate of 60% or more, we able to identify the timing of the changeover from para-dormancy to endo-dormancy, and endo-dormancy to eco-dormancy. Analysis of the chilling requirement during the endo-dormancy period revealed that chilling accumulation up to 255 DAFB to release endo-dormancy amounted to 666 and 517 h based on the CH and Utah models, respectively. Observation of internal changes in the bud during endo-dormancy showed that flower bud differentiation begins from mid-July, and t ime of inflorescence o f the disk f lower is a vailable to f ind. The f lower buds subsequently developed slowly but steadily during endo-dormancy and in the following year in February, the developmental stage of each organ had progressed. Moreover, the flower buds of 'Fuji' apples were mostly healthy during the dormancy period, but some exhibited necrosis of flower primordium, due partial cell damage from the formation of ice crystals rather than a direct effect of the low temperature. Flower buds were formed in both the axillary buds of bourse shoots and terminal buds of spurs, but lower bud differentiation was observed for the terminal buds of spurs at rate of about 65% of total buds, which was directly related to the bud size and shoot diameter.

• Journal of Sericultural and Entomological Science
• /
• v.23 no.2
• /
• pp.11-36
• /
• 1982

Forty-nine plant species as additives to silkworm artificial diet and 5 species as cellulose sources for artificial diet were screened for their economic values as feed-resources for the silkworm. Feeding response to artificial diet was tested on 82 silkworm strains. The effect of rearing conditions on feeding response and enzyme activities in the silkworm was investigated. The results were summarized as follows. 1. Seven species out of 49, Vigna sinensis ENDL, Ipomoea vatatas Lamarck, Cyperus anuricus Var. Laxus, Alnus japonica Stendel, Trifolium repens L, Prunus serrulata Lindley. Var, Glycine max L increased feeding response, compared with the basic formula of artificial diet. 2. The economic values of Vigna sinensis ENDL, Ipomoea vatatas Lamarck, Cyperus anuricus Var. Laxus, Ainus japonica Stendel, Cassia tera L, Erigeron canedensis L as feed-resources for artificiale diet were recognized, through feeding experiment during the entire larval stage. 3. Mulberry cellulose showed the best results in rearing and cocoon characteristics. 4. The extent of feeding response varied according to strains and varieties. Varieties in japanese strains showed higher feeding response than those in chinese and european varieties, with considerable variations among a varieties in strains. 5. The begining of 4th instar seems to be a proper time to convert from mulberry to artificial diet, or artificial diet to mulberry, however the middle of 3rd instar seems acceptable. 6. The optimum temperature for artificial diet rearing is 30$^{\circ}C$ during the period of 1st-3rd instar and 28$^{\circ}C$ for 4th-5th instar. 7. Electrophoretic isozyme patterns of esterase and acid phosphatase on agarose gel, as affected by strain. rearing temperature and feed-resources, were observed as follow. (1) Isozyme patterns of mid-gut esterase varied, depending on instar. One or two more isozyme bands were observed in the larvae than feed on the mulberry fed for the artificial diet. (2) A strain, chinese-15 with a higher feeding response, had 1∼2 more bands than chinese-60 with a lower feeding response. (3) Five bands of mid-gut esterase in 3rd and 4th instar larvae reared at 28$^{\circ}C$. and 4 for 3rd instar and 6∼7 for 4th instar larvae at 35$^{\circ}C$ were observed. (4) No similar esterase bands could be found among mid-gut, blood and silkgland. There are five esterase bands in the midgut, one in blood and three in silkgland. (5) There was rather small digerence in acid phosphatase types of mid-gut and blood according to varieties and rearing temperature. No active band was shown in silkgland. In midgut, there was one acid phosphatase band at 3rd instar, two at 4th instar and three at 5th instar. In blood, one active band at 3rd or 4th instar and three bands at 5th inster wire detected.

• Journal of Chest Surgery
• /
• v.40 no.5 s.274
• /
• pp.341-350
• /
• 2007

Background: We present here the early and midterm surgical results for infective endocarditis and we especially focus on the effect of aggressive reconstruction or root implantation after wide debridement. Material and Method: Between January 1995 and Jun 2006, we enrolled 79 adult infective endocarditis patients who underwent surgical treatment. There were 63 and 16 native and prosthetic valve endocarditis cases, respectively. They included 27 cases of culture negative endocarditis. With performing valve replacement or repair, 28 of the patient underwent a more aggressive surgical option, for example, aortic root replacement or reconstruction, or heart base reconstruction etc. Result: There were statistical relationships between the in-hospital mortality and staphylococcal infection, urgent-based operation and operation during the active phase of endocarditis. Wide debridement and aggressive reconstruction were not related to either the post operative mortality or the early morbidity. Culture negative endocarditis was not related to the postoperative mortality and morbidity. Conclusion: Physicians must pay attention to patients' medical treatment during the preoperative period of the infective endocarditis. If surgery is considered for treating infective endocarditis, it should be performed before the downhill course of the disease so that the surgical outcome is improved. Wide debridement and more aggressive reconstruction are also warranted.

• Journal of the Korea Concrete Institute
• /
• v.25 no.5
• /
• pp.485-496
• /
• 2013

In recent years, frequent terror or military attacks by explosion or impact accidents have occurred. Examplary case of these attacks were World Trade Center collapse and US Department of Defense Pentagon attack on Sept. 11 of 2001. These attacks of the civil infrastructure have induced numerous casualties and property damage, which raised public concerns and anxiety of potential terrorist attacks. However, a existing design procedure for civil infrastructures do not consider a protective design for extreme loading scenario. Also, the extreme loading researches of prestressed concrete (PSC) member, which widely used for nuclear containment vessel, gas tank, bridges, and tunnel, are insufficient due to experimental limitations of loading characteristics. To protect concrete structures against extreme loading such as explosion and impact with high strain rate, understanding of the effect, characteristic, and propagation mechanism of extreme loadings on structures is needed. Therefore, in this paper, to evaluate the impact resistance capacity and its protective performance of bi-directional unbonded prestressed concrete member, impact tests were carried out on $1400mm{\times}1000mm{\times}300mm$ for reinforced concrete (RC), prestressed concrete without rebar (PS), prestressed concrete with rebar (PSR, general PSC) specimens. According to test site conditions, impact tests were performed with 14 kN impactor with drop height of 10 m, 5 m, 4 m for preliminary tests and 3.5 m for main tests. Also, in this study, the procedure, layout, and measurement system of impact tests were established. The impact resistance capacity was measured using crack patterns, damage rates, measuring value such as displacement, acceleration, and residual structural strength. The results can be used as basic research references for related research areas, which include protective design and impact numerical simulation under impact loading.

• Journal of Radiation Protection and Research
• /
• v.36 no.2
• /
• pp.71-78
• /
• 2011

Yeong-Gwang N.P.P Private Environment Supervisory Organization analyzed over 3,000 samples including 10 marine and 24 land samples from the year 2,000 to 2009. According to the results of the analysis, artificial nuclides that resulted from the effect of Yeong-Gwang Nuclear Power Plant operations were not detected in most samples. However, from the rain and seawater samples, which were taken from inside the plants such as the intake, the discharge and the observatory, $^3H$ was detected although it was below the regulation level. The $^3H$ concentration detected in the rain taken from the observatory, by the yearly average criterion, was 30.5~40.0 $Bq{\cdot}L^{-1}$, which is around 20 times the $^3H$ concentration detected in the surroundings of the power plants, but it is 0.1% of the regulation level of 40,000 $Bq{\cdot}L^{-1}$. Also, $^3H$ concentration detected in the seawater taken from the intake and the discharge, by the yearly average criterion, was 2.75~17.8$Bq{\cdot}L^{-1}$, which means the concentration detected in the discharge is about 140~280% higher than that detected in the intake except the year 2006. Based on these results, it was determined that, although lower than the regulation level, the $^3H$ in gas and liquid form detected in the rain and seawater sampled from the observatory and the discharge was released into the environment from the power plants. Therefore, regular monitoring and analysis is required on the level of $^3H$ in the observatory and the discharge.

• Journal of The Korean Association For Science Education
• /
• v.32 no.4
• /
• pp.570-585
• /
• 2012

The Korean national curriculum for secondary school emphasizes scientific problem solving. In line with the national curriculum, many educational studies have been conducted in relation to science education. The objects of these studies were well-defined and well-structured problems. The studies were criticized for overlooking ill-defined and ill-structured problems. Some research has dealt with problem finding in ill-structured problems, which is related to creativity. There is a need for a study of scientific problem finding process in an ill-structured problem situation, because this study will help teachers wanting to teach scientific problem-finding in an ill-structured problem situation. The objective of this study was to conduct an empirical study on the scientific problem finding process in an ill-structured problem situation. One task of scientific problem finding in an ill-structured problem situation was assigned to 92 university students; thereafter, 32 of them participated in the research through interviews. Results indicated that the scientific problem finding process depended on initial clues and tentative solutions. Initial clues were affected by students' experiences, such as major classes, films, and novels. Tentative solutions were influenced by background knowledge of the tasks. Students screened information browsed on the Internet. They applied some standards for selection, particularly emphasized reliability standards, which are supposed to be studied in other contexts. All the students used assumptions to make their problems appear probable, which could be a useful tool to articulate.