• Journal of the Korean Ceramic Society
• /
• v.30 no.10
• /
• pp.871-879
• /
• 1993

Effects of K2SO4 and Na2SO4 on C3S formation and its microstructure were investigated. C3S formation was not influenced by addition up to 6.0wt% of K2SO4 as SO3 base, however it was prevented by only 1.0wt% of Na2SO4 addition. C3S prevention by added Na2SO4 was the reason why C2S stabilized by Na+ and SO42- could not react to C3S. Added K2SO4 appeared as K2SO4, however added Na2SO4 appeared as the form of Na2xCa3-xAl2O6, (Na0.8Ca0.1)SO4 and Na2SO4 in interstitial phase.

• Analytical Science and Technology
• /
• v.16 no.2
• /
• pp.159-165
• /
• 2003

To develop an ionic equilibria model applicable to the sulfuric acid leaching solutions of zinc oxide ore, the method of the Pitzer equation and that of the Vasil'ev equation were compared. As the ionic strength of the solution increased to 9 m, the results of ionic equilibria by the Pitzer equation were more accurate than those by Vasil'ev. To simulate the sulfuric acid leaching solutions of zinc oxide ore, the mixed solutions with the various composition of $ZnSO_4-Fe_2(SO_4)_3-Na_2SO_4-H_2SO_4-NaOH-H_2O$ were prepared. The pH values calculated in this study agreed well with those measured at $25^{\circ}C$.

• Journal of Sensor Science and Technology
• /
• v.5 no.4
• /
• pp.25-34
• /
• 1996

A SOx sensor using NASICON electrolyte was developed for monitoring of air pollution. The following galvanic cell with $Na_{2}SiO_{3}(Pt)$ reference electrode was assembled : Pt | $Na_{2}SiO_{3}$ | NASICON | $Na_{2}SO_{4}$ | Pt, $SO_{2}$, air $Na_{2}SO_{4}$ was used as an indicator electrode to protect NASICON electrolytes from chemical reaction with $SO_{2}$. The EMFs were measured after injecting $SO_{2}$ in the initial concentrations range of $5{\sim}95ppm$ at $400{\sim}550^{\circ}C$. The measured and calculated potentials were in good agreement above $500^{\circ}C$. However, the cells were unstable below $500^{\circ}C$, most likely due to incomplete attainment of chemical equilibrium. Response time was within 10 min. Based on the stability and response time of this cell, the NASICON solid electrolyte with $Na_{2}SiO_{3}(Pt)$ as the reference electrode and $Na_{2}SO_{4}$ (Pt)as the indicator electrode showed the possibility of a reliable, inexpensive commercial solid-state SOx sensor.

• Resources Recycling
• /
• v.11 no.1
• /
• pp.19-25
• /
• 2002

For $ZnSO_4$-$Na_2$$SO_4$-$H_2$ $SO_4$-$NaOH-H_2$O system, pH of solutions with different electrolyte concentrations was measured at $25^{\circ}C$ and ionic equilibria were analyzed by using K-value method. Activity of water and activity coefficients of solutes were calculated by Pitzer equation. The equilibrium concentration and activity coefficients of solutes were calculated from initial experimental conditions. At high ionic strength of 4m, the pH values calculated were in good agreement with those measured. In the experimental ranges of ionic strength of solution from 3.5 to 4.3 m, the mean activity coefcient of $ZnSO_4$calculated agreed well with those obtained from literature.

• Resources Recycling
• /
• v.30 no.1
• /
• pp.35-43
• /
• 2021

In this study, Na2SO4 and KCl reagents were used to synthesize K2SO4 as a basic study for recycling byproducts generated during the manufacture of steel and cement. The mole ratio of Na2SO4 to KCl, the saturation of the solution, and the stirring temperature were controlled to derive the optimal manufacturing conditions. The microstructure and crystallinity of the materials prepared were evaluated using scanning electron microscopy and X-ray diffraction analysis. Pure K2SO4 was obtained when the mole ratio of Na2SO4 to KCl was 1:6-18, the saturation of the solution was less than 160%, and the stirring temperature was 20℃, 50℃. The optimal manufacturing conditions to maximize the crystallinity and yield of K2SO4 while minimizing the energy consumption were 1:6 mole ratio of Na2SO4 to KCl, 140% saturation of the solution, and 20℃ stirring temperature.

• Journal of Surface Science and Engineering
• /
• v.51 no.4
• /
• pp.214-217
• /
• 2018

Stainless steel grade 430 with a composition of Fe-17%Cr was corroded in $Na_2SO_4$ and ($Na_2SO_4+NaCl$) salts at 800 and at $900^{\circ}C$ for up to 20 h. It corroded mainly to $Cr_2O_3$, along with a small amount of $Fe_2O_3$ and $Fe_3O_4$. The formed oxide scales were neither dense nor compact enough owing to their ensuing dissolution into the salt during corrosion, which facilitated internal corrosion. Corrosion occurred faster at $900^{\circ}C$ than $800^{\circ}C$. NaCl in $Na_2SO_4$ aggravated the scale adherence.

• Journal of the Korean Ceramic Society
• /
• v.30 no.12
• /
• pp.1071-1079
• /
• 1993

Interaction of alkali oxides and SO3 and C3S formation and microstructure was studied using K2CO3 and Na2CO3 as alkali sources and (NH4)2SO4 for SO3. When SO3/K2O=1.43 as mole ratio, K2O and SO3 react to form K2SO4, this phase is immiscible with other oxide melt and thus could not affect C3S formation as well as its microstructure. In a condition of SO3/K2O 1, C3S crystals were round and grown in a much larger size. With addition of Na2O and SO3 by only 1wt% each, C3S formation was strongly hindered. Since C2S was stabilized by Na+ and SO4-2, it could not react to give C3S formation. However in the condition of SO3/Na2O=1.43, a little amount of C3S was formed. It is considered that small amount of Na2SO4 was formed, this phase was immiscible with clinker liquid, and the C3S crystals were formed locally in the liquid part of relatively low Na2O and SO3 compositions. These crystals had irregular and rough surfaces and contained more inclusions than those grown from K2O.SO3 system.

• Applied Biological Chemistry
• /
• v.36 no.6
• /
• pp.434-439
• /
• 1993

To investigate the effects of neutral salts on the foaming properties of sodium caseinate, turbidity, surface tension, absolute viscosity, foaming ability and foam stability of the caseinate solutions(5%, w/v) with added NaF, $Na_2SO_4$, NaCl, $NaNO_3$, and NaSCN at concentrations of 0.1, 0.5, 1.0, 1.5 and 2.0 M were examined. NaCl and $NaNO_3$ improved the foaming ability compared to sodium caseinate without salt, and also $Na_2SO_4$ and NaF did the foaming ability at the concentrations of 0.1M and 0.5M, while NaSCN did not improve the foaming ability. For foaming ability optimal concentrations of the salts were 0.5, 1.5, and 1.0 M in $Na_2SO_4$, NaCl, and NaSCN, respectively. Additions of $Na_2SO_4$, NaF and $NaNO_3$ at 0.5 M concentrations improved the foam stability of sodium caseinate by 825%, 615%, and 53% compared to control, while those of NaSCN reduced foam stability.

• Journal of Soil and Groundwater Environment
• /
• v.8 no.3
• /
• pp.23-29
• /
• 2003

Setschenow constants of six alkali and alkaline earth metal-based electrolytes (i.e., NaCl, KCl, CaCl$_2$, K$_2$SO$_4$, Na$_2$SO$_4$, NaClO$_4$) for three polycyclic aromatic hydrocarbons (PAHs) (i.e., naphthalene, pyrene, and perylene) were investigated to evaluate the influence of a variety of inorganic salts on the aqueous solubility of PAHs. Inorganic salts showed a wide range of K$\_$s/ values (L/mol), ranging from 0.1108 (NaClO$_4$) to 0.6680 (Na$_2$SO$_4$) for naphthalene, 0.1071 (NaClO$_4$) to 0.7355 (Na$_2$SO$_4$) for pyrene, and 0.1526 (NaClO$_4$) to 0.8136 (Na$_2$SO$_4$) for perylene. In general, the salting out effect of metal cations decreased in the order of Ca$\^$2+/>Na$\^$+/>K$\^$+/. The effect of SO$_4$$\^$2-/>Cl$\^$-/>ClO4$\^$-/ was observed for anions of inorganic salts. The K$\_$s/ values decreased in the order of perylene>pyrene>naphthalene for K$_2$SO$_4$. However, the order of decreasing salting out effect for NaCl, KCl, CaCl$_2$, and NaClO$_4$ was perylene>naphthalene>pyrene. Hydration free energy of the 1:1 and 2:1 alkali and alkaline earth metal-based inorganic salts solution was observed to have a meaningful correlation with Setschenow constants. Thermodynamic interactions between PAH molecules and salt solution can be of importance in determining the magnitude of salting out effect for PAHs at a given salt solution.

• Journal of Plant Biology
• /
• v.34 no.3
• /
• pp.185-190
• /
• 1991

Hypocotyl-derived callus cultures of Brassica pekinensis cv. Chungseng were grown on Murashige-Skoog medium containing NaCl, Na2SO4 and mannitol to clarify the effect of salts on callus growth, proline accumulation and water relations. Na2SO4 was more inhibitory than NaCl when survival rate, growth and fresh:dry weight ratios of established callus were measured. Fresh weight in 0.25% NaCl treatment was more than twice as increasable in comparison to the same concentration of Na2SO4 or control. Proline concentration was increased on either salt, attained at highest levels at the 5th subculture, and fluctuated as affected by both salts or mannitol. Concentrations of redeucing sugars were sharply increased after 2 or 3 times of subculture and decreased by increasing subculture. The water and osmotic potential in callus reached a maximum negative value after two weeks in culture, regardless of salt type and mannitol and tugor remained relatively constant on both salt and mannitol treatments.