• Journal of the Korean Ceramic Society
• /
• v.37 no.1
• /
• pp.26-32
• /
• 2000

Preparation and characteristics of a matrix retaining electrolyte using SiC whisker, PES binder, and NMP(n-methyl-2-pyrrolidone) as a non-volatile solvent for a phosphoric acid fuel cell were investigated. The conditions of binder and plasticizer, and the effects of substituting a volatile solvent by a non-volatile solvent were also studied. The minimum amount of the binder was about 17 wt% for the proper bubble pressure and surrounding SiC whiskers. And the maximum amount of the plasticizer was about 10wt% to be fitted into the polymer chain of the binder. The matrix prepared by using a non-volatile solvent needed longer time to dry, and its pore size was smaller compared with that of the matrix prepared by using volatile solvent. The small pore size resulted in decrease of the overall pore volume. The ionic conductivity in the condition of the same thickness was decreased due to decrease of phosphoric acid absorbancy. As the internal resistance of the electrolyte increased, the fuel cell performance slightly decreased.

• Applied Chemistry for Engineering
• /
• v.10 no.1
• /
• pp.138-142
• /
• 1999

Imide-containing diamine and dicarboxylic acid monomers, N-(4-aminophenyl)-4-aminophthalimide(APAP), N-(4-carboxyphenyl)-4-carboxyphthalimide(CPCP), N,N'-oxydiphenylenebis(4-aminophthalimide)(ODPAP) and N,N'-oxydiphenylenebis(4-carboxyphthalimide)(ODPCP) were prepared. Poly(amide-imide)s were prepared by condensation reaction of the diamine and the dicarboxylic acid monomers. Poly(amide-imide)s were also prepared from the diamine monomers and aromatic acid chlorodes such as terephthaloyl chloride and isophthaloyl chloride. The polymers possess inherent viscosity of 0.18~0.67 dL/g and brittle films were cast from NMP/LiCl solution. The poly(amide-imide)s are easily soluble in NMP/LiCl and also partially soluble in polar aprotic solvents such as DMF, DMSO, NMP and DMAc even at $80^{\circ}C$. DSC traces of polymers showed no glass transition temperature and melting temperature, and TGA traces showed a 10% weight loss at $500^{\circ}C$.

• Journal of Microbiology and Biotechnology
• /
• v.20 no.8
• /
• pp.1230-1239
• /
• 2010

Five bacterial species, capable of degrading the recalcitrant organic compounds (ROCs) diethyleneglycol monomethylether (DGMME), 1-amino-2-propanol (APOL), 1-methyl-2-pyrrolidinone (NMP), diethyleneglycol monoethylether (DGMEE), tetraethyleneglycol (TEG), and tetrahydrothiophene 1,1-dioxide (sulfolane), were isolated from an enrichment culture. Cupriavidus sp. catabolized $93.5{\pm}1.7$ mg/l of TEG, $99.3{\pm}1.2$ mg/l of DGMME, $96.1{\pm}1.6$ mg/l of APOL, and $99.5{\pm}0.5$ mg/l of NMP in 3 days. Acineobacter sp. catabolized 100 mg/l of DGMME, $99.9{\pm}0.1$ mg/l of NMP, and 100 mg/l of DGMEE in 3 days. Pseudomonas sp.3 catabolized $95.7{\pm}1.2$ mg/l of APOL and $99.8{\pm}0.3$ mg/l of NMP. Paracoccus sp. catabolized $98.3{\pm}0.6$ mg/l of DGMME and $98.3{\pm}1.0$ mg/l of DGMEE in 3 days. A maximum $43{\pm}2.0$ mg/l of sulfolane was catabolized by Paracoccus sp. in 3 days. When a mixed culture composed of the five bacterial species was applied to real wastewater containing DGMME, APOL, NMP, DGMEE, or TEG, 92~99% of each individual ROC was catabolized within 3 days. However, at least 9 days were required for the complete mineralization of sulfolane. Bacterial community diversity, analyzed on the basis of the TGGE pattern of 16S rDNA extracted from viable cells, was found to be significantly reduced in a conventional bioreactor after 6 days of incubation. However, biodiversity was maintained after 12 days of incubation in an electrochemical bioreactor. In conclusion, the electrochemical reduction reaction enhanced the diversity of the bacterial community and actively catabolized sulfolane.

• Membrane Journal
• /
• v.15 no.1
• /
• pp.22-33
• /
• 2005

Asymmetric PVDF membranes were prepared by the phase inversion from casting solutions containing PVDF, NMP as solvent and 1,4-dioxane, DGDE, acetone, or GBL as additives by immersing them in water. The effects of various additives on the casting solution properties, permeation properties, and membrane structures were investigated. Low miscibility of 1,4-dioxane, DGDE and acetone with the coagulant (water) compared with NMP resulted in reducing the membrane pore size. When DGDE is used as an additive, the pore size was reduced because of its incipient sharp interface formation in the water. GBL increased membrane pore size because of its polarity compared to that of NMP. The PVDF membranes with various pore sizes could be obtained by controlling the amount of additive. The effect of mixed solvent (aqueous and non-aqueous solution) on permeation through membrane was investigated. Not only solution viscosity but surface tension affected solvent permeation.

• 제어로봇시스템학회:학술대회논문집
• /
• 1997.10a
• /
• pp.422-425
• /
• 1997

We consider the robust control problem for nonminimum phase(NMP) systems with parametric uncertainty which appear often in aircraft and missile control. First, a new method that makes such an uncertain NMP system to be factored as a interval minimum phase(MP) transfer function and a time delay term in the Pade approximation form has been presented. The controller to be proposed consists of a compensator $C_{Q}$(s) with Smith predictor in the internal model control(IMC) structure, so that it can have good robustness and performance against the structured uncertainty and the time delay behaviour due to NMP plant the $C_{Q}$(s) is designed on the MP model by using QFT. The stability and performance of overall system has been evaluated by the generalized Kharitonov theorem.rem.

• Journal of the Semiconductor & Display Technology
• /
• v.14 no.4
• /
• pp.8-12
• /
• 2015

As NMP (N-Methyl-2pyrrolidone) is becoming important in many fields, the demand for it is also rising rapidly. With its chemical property of high boiling point, low vapor pressure and high water solubility, it is easy to recover it after processing. Therefore, it is increasingly needed to develop a system that effectively recovers NMP solvent. The study produced a system modeling using AMESim software before developing high purity solvent recovery (HPSR) system to recover NMP solvent. Then, it verified reliability by comparing the simulation model with the test result.

• Membrane Journal
• /
• v.15 no.2
• /
• pp.147-156
• /
• 2005

It is well-known that polyethersulfone (PES) has high $CO_2$ selectivity over $N_2\;(or\;CH_4)$ and excellent pressure resistance of $CO_2$ plasticization among muy commercialized engineering plastics[1-4]. Asymmetric PES hollow fiber membranes for flue gas separation were developed by dry-wet spinning technique. The dope solution consists of PES, NMP and acetone. Water and water/NMP mixtures are used in outer and inner coagulants, respectively. Gas permeation rate (i.e., permeance) and $CO_2/N_2$ selectivity were measured with pure gas, respectively and the micro-structure of hollow fiber membranes was characterized by scanning electron microscopy. The effects of polymer concentration, ratio of NMP to acetone, length of air gap, evaporation condition and silicone coating were investigated on the $CO_2/N_2$ separation properties of the hollow fibers. Optimized PES hollow fiber membranes exhibited high permeance of $25\~50$ GPU and $CO_2/N_2$ selectivity of $30\~40$ at room temperature and have the apparent skin layer thickness of about $0.1\;{\mu}m$. The developed PES hollow fiber membranes, would be a good candidate suitable for the flue gas separation process.

• Membrane Journal
• /
• v.18 no.4
• /
• pp.282-293
• /
• 2008

Partially sulfonated poly(aryl ether sulfone) membranes were prepared from the sulfonated sulfone monomer, which was synthesized by a nucleophilic substitution, non-sulfonated monomers and potassium carbonate by a direct polymerization method and a subsequent solution casting technique with mixed solvents of N-methyl-2-pyrrolidone (NMP) and dimethylacetamide (DMAc). To investigate the effect of mixed solvent, the volume ratios of NMP and DMAc were varied in the range of $0{\sim}100%$ and the degrees of sulfonation of the copolymers were fixed as 50%. The surface properties of the resulting membranes were examined by scanning electron microscope (SEM) and atomic force microscope (AFM), and a comparative study of the morphology changes and the physicochemical properties such as proton conductivity and methanol permeability was achieved. It was found that proton conductivities depend on the volume ratio of NMP-DMAc mixed solvents, and the proton conductivity determined at the condition of $25^{\circ}C$ and 100% relative humidity was $1.38{\times}10^{-1}\;S/cm$ for the membrane prepared in the 50:50 v/v-% of NMP : DMAc mixed solvent.

• Asian Pacific Journal of Cancer Prevention
• /
• v.15 no.15
• /
• pp.6283-6286
• /
• 2014

In patients with microscopic hematuria there is a need for better identification of those who are at greater risk of harbouring bladder tumors. The RisikoCheck(C) questionnaire has a strong correlation with the presence of urothelial carcinoma (UC) of the bladder and in combination with other available tests may help identify patients who require detailed clinical investigations due to increased risk of presence of bladder tumors. This study aimed to evaluate the efficacy of RisikoCheck(C) questionnaire together with NMP-22(R) (BladderChek(R)) as a point-of-care urine test in predicting the presence of bladder tumors in patients presenting with microscopic hematuria as the sole finding. In this multi-institutional prospective evaluation of 303 consecutive patients without a history of urothelial carcinoma (UC), RisikoCheck(C) risk group assessment, urinary tract imaging and cystourethroscopy as well as urine cytology and Nuclear Matrix Protein-22 (NMP-22 BladderChek) testing were performed where available. The sensitivity, specificity, negative predictive value (NPV), and positive predictive values (PPV) for the risk adapted approach were calculated. All patients underwent cystoscopy, and tumors were detected in 18 (5.9%). Urine cytology and NMP-22 was positive for malignancy in 9 (3.2%) and 12 (7.5%) of patients, respectively. A total of 43 (14%) patients were in the high risk group according to the RisikoCheck(C) questionnaire. The sensitivity and specificity of the questionnaire in detecting a bladder tumor was 61.5 % and 84.0 % in the high risk group. In patients with either a positive NMP-22 test or high risk category RisikoCheck(C), 23.6% had bladder tumors with a corresponding sensitivity of 54.2% and specificity of 88.6%. If both tests were negative only 3.3% of the patients had bladder tumors. The results of our study suggest that the efficacy of diagnostic evaluation of patients with microscopic hematuria may be further enhanced by combining RisikoCheck(C) questionnaire with NMP-22.

• 제어로봇시스템학회:학술대회논문집
• /
• 1997.10a
• /
• pp.418-421
• /
• 1997

A design method of robust controller for the longitudinal autopilot of BTT missile is considered. The difficulties are a set of linearized dynamic models which corresponds to different operating points has a wide range of parameters and it has even Non-Minimum Phase(NMP) zeros. In this paper, such a family of models is expressed by an interval plant. Then a robust control design method using QFT is represented. A simulation result shows that the proposed controller satisfies the given specification well.