• Macromolecular Research
• /
• v.9 no.6
• /
• pp.327-331
• /
• 2001

A new soluble photosensitive poly(amide-co-imide) containing p-phenylenediacryloyl moiety was synthesized and its photoreactivity was characterized. The copolymer was synthesized fromp-phenylenediacryloyl chloride, 4,4-(hexafluoroisopropylidene)diphthalic anhydride and two equivalents of bis(4-aminophenyl) ether in NMP with a subsequent chemical imidization of the resulting poly[amide$\xi$ο-(amic acid)] by acetic anhydride and pyridine. The structure and thermal properties of the polymer were characterized by spectroscopic methods and thermal analyses. The polymer was stable up to 350$\^{C}$, showed good solubility in polar aprotic solvents, and became insoluble after UV irradiation due to the[2+2] cycloaddition of phenylenediacryloyl moiety. Photoreactivity of the polymer was investigated in solution or as a film with respect to the various exposure conditions by UV/Vis spectroscopy. The photosensitivity was noticeably increased with the irradiation temperature, especially in the presense of photosensitizer. The reason for the increased sensitivity was speculated based on the flexibilization of main chain at elevated temperature. Exposure characteristic curves were obtained from the gel fraction experiments after UV irradiation. The sensitivity and contrast at 160$\^{C}$ were measured to be 293 mJ/㎠ and 1.64, respectively.

• Bulletin of the Korean Chemical Society
• /
• v.21 no.9
• /
• pp.896-900
• /
• 2000

A study was done on the synthesis of new poly(arylene ether)s and poly(arylenesulfide) with rigid benzoxazole pendants using nucleophilic aromatic substitution reaction. As a new aromatic monomer, 1,4-bis(2-benzox-azolyl)-2,5-difluorobenzene [I] w as synthesized in three steps starting from 1,4-dibromo-2,5-difluorobenzene. A model reaction of difluoro monomer [I] with two equivalents of m-cresol or thiophenol in a typical ether con-densation reaction conditions gave very high yields ( > 93%) of the desired disubstituted product, suggesting the feasibility of polymer formation in these reaction system. Monomer[I] was polymerized with bisphenols and bisbenzenethiol in NMP using K2CO3 as base. The molecular weight of the resulting polymers, however,seemed relatively low according to their solution viscosity values ( ηinh = 0.15-0.29 dL/g). The poly(arylene ether)s were soluble in several common organic solvents including chloroform, pyridine and N,N'-dimethylfor-mamide. The poly(arylene sulfide) was, however, ony soluble in strong acids like sulfuric acid and trifluoro-acetic acid. The glass transition temperatures were found to be 175-215 $^{\circ}C.$ These polymers were stable up to 380-420 $^{\circ}C$ in both nitrogen and air, as determined by the temperature that a significant weight loss began to appear on TGA.

• Macromolecular Research
• /
• v.17 no.11
• /
• pp.912-918
• /
• 2009

An optically active diacid containing the L-histidine moiety was prepared by reacting pyromellitic dianhydride (1,2,4,5-benzenetetracarboxylic acid 1,2,4,5-dianhydride) 1 with L-histidine 2 in acetic acid, and was polymerized with several aromatic diamines 5a-g to obtain a new series of optically active poly(amide-imide)s (PAIs) using two different methods, such as direct polycondensation in a medium consisting of N-methyl-2-pyrrolidone (NMP)/triphenyl phosphite (TPP)/calcium chloride ($CaCl_2$)/pyridine (Py) and direct polycondensation in a tosyl chloride (TsCl)/pyridine (Py)/N,N-dimethylformamide (DMF) system as a condensation agent. The resulting new polymers 6a-g with inherent viscosity was obtained in good yield. The polymers were readily soluble in polar organic solvents, such as N,N-dimethyacetamide (DMAc), N,N-dimethyformamide (DMF), and dimethyl sulfoxide (DMSO). The obtained polymers were characterized by FTIR, specific rotation, elemental analysis as well as $^1$H-NMR spectroscopy and gel permeation chromatography (GPC). The thermal stability of the resulting PAIs was evaluated with thermogravimetric analysis techniques under a nitrogen atmosphere.

• Asia-Pacific Journal of Business
• /
• v.12 no.1
• /
• pp.121-134
• /
• 2021

Purpose - This study examines whether flight-to-liquidity (FTL) explains the dynamic liquidity risk on stock returns, and whether it has a significant influence on determinants the cross-section of stock returns. Design/methodology/approach - This study suggests a new risk factor, dynamic liquidity hedge portfolio (DLP), to reflect the dynamic impact of liquidity risk on stock returns and the Fama-MacBeth 2 stage regression analysis is employed in order to analyze the data. Findings - First, the DLP factor shows more positive and significant beta for the small or illiquidity stocks. Second, the DLP shows a different influence than SMB (size risk factor), HML (value risk factor), NMP (liquidity risk factor), FTVOL (total volatility factor) in determining the cross-section of stock returns. In addition, the DLP has a statistically significant risk premium of around 5%, which is relatively larger than other risk factors. Research implications or Originality - This study has academic value in terms of newly confirming that the DLP factor has a more significant impact on cross-sectional determination of stock returns than other risk factors by proposing a conditional liquidity factor that can explain the FTL phenomenon.

• Analytical Science and Technology
• /
• v.36 no.2
• /
• pp.99-104
• /
• 2023

Trace elements (TEs) have significant effects on both dental health and human health. Toxic effects are caused by deficiency or excess of TEs. This study was performed to determine levels of toxic and trace elements in incisor and molar teeth sampled from male and female participants residing in the north and south regions of Sudan. The tooth enamel of 18 extracted human teeth was analyzed using particle-induced x-ray emission (µ-PIXE) to determine its elemental profile and distribution. GeoPIXEII software package was used for the analysis of µ-PIXE data. The main elements determined were Na, Mg, P, S, Cl, K, Ca, Mn, Fe, Zn, Co, and Sr which were homogeneously distributed in the areas of the tooth enamel mapped with micro-PIXE.

• Advances in nano research
• /
• v.14 no.4
• /
• pp.355-362
• /
• 2023

Physical exercise, especially intense exercise and high intensity interval training (HIIT) by trampoline, can lead to muscle injuries. These effects can be reduced with intelligent products made of nanocomposite materials. Most of these nanocomposites are polymers reinforced with silicon dioxide, alumina, and titanium dioxide nanoparticles. This study presents a polymer nanocomposite reinforced with silica. As a result of the rapid reaction between tetraethyl orthosilicate and ammonia in the presence of citric acid and other agents, silica nanostructures were synthesized. By substituting bis (4-amino phenoxy) phenyl-triptycene in N, N-dimethylformamide with potassium carbonate, followed by catalytic reduction with hydrazine and Pd/C, the diamine monomer bis (4-amino phenoxy) phenyl-triptycene is prepared. We synthesized a new polyaromatic (imide) with triptycene unit by sol-gel method from aromatic diamines and dianhydride using pyridine as a condensation reagent in NMP. PI readily dissolves in solvents and forms robust and tough polymer films in situ. The FTIR and NMR techniques were used to determine the effects of SiO₂ on the sol-gel process and the structure of the synthesized nanocomposites. By using a simultaneous thermal analysis (DTA-TG) method, the appropriate thermal operation temperature was also determined. Through SEM analysis, the structure, shape, size, and specific surface area of pores were determined. Analysis of XRD results is used to determine how SiO₂ affects the crystallization of phases and the activation energy of crystallization.

• Advances in nano research
• /
• v.16 no.1
• /
• pp.81-90
• /
• 2024

In the oil and gas industry, composite materials should exhibit high flexibility and strength for offshore structures. Therefore, weak points in the composites should be improved, such as brittleness, moisture penetration, and diffusion of detrimental ions into nanometric pores. This study aimed to increase the strength, flexibility, and plugging of nanopores using single-layer graphene oxide (SGO) nanosheets. Therefore, SGO is added to unsaturated polyester resin at concentrations of 0.015 and 0.15 % with Normal Methyl Pyrrolidone (NMP) as a solvent for the formation of Nanographene Oxide Reinforced Polymer (NGORP). The mechanical properties of the prepared samples were tested using tensile testing (ASTM-D 638). It has been shown that incorporating SGO, approximately 0.015%, into the base resin resulted in enhanced properties such as rupture resistance forces increased by 745.61 N, applied stress tolerances increased by 4.1 MPa, longitude increased to 1.58 mm, elongation increased by about 2.38%, and rupture energy increased by about 204.51 J. Despite the decrease in tensile force strength properties in the manufactured nanocomposite with 0.15% SGO, it has exclusive flexibility properties such as a high required energy level for rupture of 5,576 times and a formability of 40% more than the base sample. It would be best to use NGORP manufactured from 0.015% nanosheets with exclusive properties rather than base samples for constructing parts and equipment, such as rebars, composite sheets, and transmission pipes, on offshore platforms.

• Macromolecular Research
• /
• v.17 no.10
• /
• pp.739-745
• /
• 2009

N,N'-(bicyclo[2,2,2]oct-7-ene-tetracarboxylic)-bis-L-amino acids 3a-g were synthesized by the condensation reaction of bicyclo[2,2,2]oct-7-ene-2,3,5,6-tetracarboxylic dianhydride 1 with two equimolars of Lalanine 2a, L-valine 2b, L-leucine 2c, L-isoleucine 2d, L-phenyl alanine 2e, L-2-aminobutyric acid 2f and L-histidine 2g in an acetic acid solution. Seven new poly(amide-imide)s PAIs 5a-g were synthesized through the direct polycondensation reaction of seven chiral N,N'-(bicyclo[2,2,2]oct-7-ene-tetracarboxylic)-bis-L-amino acids 3a-g with bis(3-amino phenyl) phenyl phosphine oxide 4 by two different methods: direct polycondensation in a medium consisting of N-methyl-2-pyrrolidone (NMP)/triphenyl phosphite (TPP)/calcium chloride ($CaCl_2$/pyridine (py), and direct polycondensation in a tosyl chloride (TsCl)/pyridine (py)/N,N-dimethylformamide (DMF) system. The polymerization reaction produced a series of flame-retardant and thermally stable poly(amide-imide)s 5a-g with high yield. The resulted polymers were fully characterized by FTIR, $^1H$ NMR spectroscopy, elemental analyses, inherent viscosity, specific rotation and solubility tests. Data obtained by thermal analysis (TGA and DTG) revealed that the good thermal stability of these polymers. These polymers can be potentially utilized in flame retardant thermoplastic materials.

• Korean Chemical Engineering Research
• /
• v.49 no.3
• /
• pp.352-356
• /
• 2011

In this paper, we prepared new type of hydrophilic block copolymers that exhibit the long-ranged lateral ordering in thin film. It was previously demonstrated that poly(ethyleneoxide-b-styrene) and poly(ethyleneoxide-b-metharylate-b-styrene) block copolymer thin films have a high degree of lateral ordering after solvent annealing process. In these cases, the relative humidity plays an important role in long-ranged lateral ordering. However, the origin of the humidity effect on the orders of these hydrophilic block copolymers is not fully understood. To investigate the effect of the humidity further, we prepared other hydrophilic poly(N,N-dimethylacrylamide-b-styrene)(PDMA-b-PS) block copolymers via RAFT polymerization. As with PEO-containing block copolymers, PDMA-b-PS block copolymers exhibit the long-ranged lateral ordering after solvent annealing process.

• The Journal of Pediatrics of Korean Medicine
• /
• v.32 no.3
• /
• pp.16-25
• /
• 2018

Objectives The purpose of this study is to investigate the anti-inflammatory effect of Lonicera Japonica-Glycyrrhiza Uralensis decoction extracts (LGE) on ulcerative colitis in children and adolescents. Methods Colitis was induced by DSS (Dextran Sulfate Sodium) in C57BL/6 mice. The sample mice were divided into group of four. The mice in the control group were not inflammation-induced. The control group was composed of untreated ulcerative colitis elicited mice. The mice in the experimental group were administered with Pentasa and another experimental group mice were treated with LGE after colitis elicitation. The effects on ulcerative colitis were evaluated by the morphological changes of colonic mucosa, decrease in the effect of pro-inflammatory cytokines ($TNF-{\alpha}$ and $NF-{\kappa}B$) and inflammatory cytokines (iNOS and COX-2) in the mucosa. Results LGE showed protective effects in DSS induced ulcerative colitis. LGE inhibited shortening of colon length and relieved the hemorrhagic erosion in colonic mucosa. LGE decreased pro-inflammatory cytokines ($TNF-{\alpha}$ and $NF-{\kappa}B$) and inflammatory cytokines (iNOS and COX-2). According to the GC/MS analysis, N-methyl pyrrolidone (NMP) was identified. Conclusions The result shows the clinical efficacy of LGE and demonstrates possible treatment options for ulcerative colitis. Further investigations for biological activity and chemical analysis of LGE will be needed.