• Title/Summary/Keyword: NM64

Search Result 336, Processing Time 0.025 seconds

Generation of 10 GHz Short Pulses from Continuous Wave Laser Using Cascaded Intensity and Phase Modulators and a Single Mode Optical Fiber (광 강도/위상변조기 및 단일모드 광섬유를 이용한 CW 광원으로부터 10 GHz 초단 펄스발생)

  • Sung, Hyun-Ju;Seo, Dong-Sun
    • Journal of IKEEE
    • /
    • v.16 no.4
    • /
    • pp.364-368
    • /
    • 2012
  • We generate 10 GHz short pulses from a continuous wave laser at 1.5 um by cascaded intensity and phase modulation, followed by chirp compensation using a single mode fiber. The measured spectral and pulse widths are 0.64 nm and 5.7 ps respectively, resulting in the time-bandwidth product of 0.46.

Processing Suitability of Canned Ark Shell (새고막의 통조림 가공 적성)

  • 배태진
    • The Korean Journal of Food And Nutrition
    • /
    • v.11 no.2
    • /
    • pp.237-242
    • /
    • 1998
  • This study was carried out to process canned ark shell with highly quality by management of proper processing conditions for prevention of oxidation and discoloration by heating. Ark shell has hemoglobin as blood pigment in red blood shell which same as other cockles. Hemoglobin is easy to come oxidation and browning reaction, and it has large contents of carotenoid as meat pigment. Proximate compositions in ark shell were 76.9% of moisture, 18.1% of crude protein, 1.8% of crude lipid, 1.3% of carbohydrate and 1.6% of crude ash. And contents of carotenoid and hemoglobin were 0.67~1.02mg% and 0.98~1.64g/dl, respectively. When the living ark shell was soaked in 2% NaCl solutions, about 89% of mud was removed after 10 hours soaking, and over 91% was removed when the pH was adjusted to 7.5. Carotenoid pigment were prepared that extracted from ark shell by using acetone. And determined visible spectrum were two peak at 452nm and 687nm, and λmax were 452nm. During thermal treatment at 95$^{\circ}C$, 111$^{\circ}C$, 116$^{\circ}C$ and 121$^{\circ}C$ for 60 minutes, retention ratio of carotenoid were 71.8%, 66.8%, 64.4% and 36.5%, and after 120 minutes retention ratio were 56.6%, 30.6%, 30.3% and 17.2%, respectively. When heated at 95$^{\circ}C$, 111$^{\circ}C$, 116$^{\circ}C$ and 121$^{\circ}C$, formation of browning material were increased at high temperature and long time treatment.

  • PDF

O2 플라즈마 처리에 따른 ITZO 박막의 표면 및 광학적 특성 연구

  • Kim, Sang-Seop;Choe, Byeong-Deok
    • Proceedings of the Korean Vacuum Society Conference
    • /
    • 2015.08a
    • /
    • pp.217.2-217.2
    • /
    • 2015
  • 본 연구에서는 ITZO를 용액으로 제작하여, $O_2$ 플라즈마 처리를 통해 표면 및 광학적 특성을 분석하였다. 열처리 전 처리시간(0초~70초)을 가변하여 $O_2$ 플라즈마 처리하였다. 박막의 표면 상태를 RMS (Root Mean Square)로 비교하였다. 처리 전 표면의 거칠기는 1.38 nm이고, 50초에서 0.67nm로 표면의 상태가 좋아지며, 이후에는 RMS가 증가하여 표면 상태가 안 좋아짐을 확인하였다. 50초까지는 $O_2$ 플라즈마 처리를 통해 표면 상태의 개선된 효과를 얻을 수 있지만, 70초 이후에는 표면이 에칭되어 저하된 특성을 보이는 것을 확인하였다. 광학적 특성은 투과도와 밴드갭으로 차이를 확인하였다. 가시광선 영역 (380 nm~770 nm)에서의 투과도는 92%에서 90%로 감소하였고, 밴드갭은 3.64eV에서 3.57eV로 줄어들었다. $O_2$ 플라즈마 처리 시간에 따라 개선효과를 얻을 수 있지만, 70초 이후에는 표면에 결함을 야기하여 표면 및 광학적 특성의 저하를 보였다.

  • PDF

The wavelength locking system of the fabry-perot filter for WDM (WDM을 위한 Fabry-perot 필터의 로킹 시스템)

  • 송준용;이호준
    • Journal of the Korean Institute of Telematics and Electronics D
    • /
    • v.34D no.6
    • /
    • pp.58-64
    • /
    • 1997
  • The wavelengt lockin gsystem of the optical fabry-perot filter theoretially derived and experimentally realized by using the ithering method in order to compensate the laser wavelength drift increasing the BER of the WDM system. The deviation between the laser wavelength and the optical filter center wavelength is compensated by applying a suitable voltage to the PZT. Accordingly, the laser wavelength selected by the fabry-perot filter always maintains the condition of maximum transmission powr. A wavelength locking system has been demonstrated using a fiber fabry-perot filter with a free spectral range of 80nm and an FWH of 1nm. The voltages of the sine wave generated for dithering was 20mV and 10mV, the frequency was 2kHz and center wavelength of the tunable laser was 1550nm. In this paper, the locking system have 20ms of locking time and 2nm of locking range.

  • PDF

Selenide Glass Optical Fiber Doped with $Pr^{3+}$ for U-Band Optical Amplifier

  • Chung, Woon-Jin;Seo, Hong-Seok;Park, Bong-Je;Ahn, Joon-Tae;Choi, Yong-Gyu
    • ETRI Journal
    • /
    • v.27 no.4
    • /
    • pp.411-417
    • /
    • 2005
  • $Pr^{3+}-doped$ selenide glass optical fiber, which guarantees single-mode propagation of above at least 1310 nm, has been successfully fabricated using a Ge-Ga-Sb-Se glass system. Thermal properties such as glass transition temperature and viscosity of the glasses have been analyzed to find optimum conditions for fiber drawing. Attenuation loss incorporating the effects of an electronic band gap transition, Rayleigh scattering, and multiphonon absorption has also been theoretically estimated for the Ge-Ga-Sb-Se fiber. A conventional double crucible technique has been applied to fabricate the selenide fiber. The background loss of the fiber was estimated to be approximately 0.64 dB/m at 1650 nm, which can be considered fairly good. When excited at approximately 1470 nm, $Pr^{3+}-doped$ selenide fiber resulted in amplified spontaneous emission and saturation behavior with increasing pump power in a U-band wavelength range of 1625 to 1675 nm.

  • PDF

Extraction of Young Antler and Antler by Water, Proteases and HCl (녹용 및 녹각의 단백질 가수분해 효소 및 염산에 의한 가용화)

  • 안용근
    • The Korean Journal of Food And Nutrition
    • /
    • v.17 no.2
    • /
    • pp.147-155
    • /
    • 2004
  • Freeze dried antler, heat dried antler, antler were extracted through processing step by water, protease and hydrochloric acid(HCl). Extraction rate of freeze dried antler at 50$^{\circ}C$ by water was 9.01%(8.82, absorbance at 280 nm), that of heat dried antler was 9.01%(4.45, absorbance at 280 nm), and that of antler was 1.10%(0.31, absorbance at 280 nm), respectively. Extraction rate of freeze dried antler by bacterial protease was 16.89%(4.50, absorbance at 280 nm), and that of heat dried antler was 17.29%(5.62, absorbance at 280 nm), and that of antler was 18.22%(0.64, absorbance at 280 nm), respectively. Extraction rate of freeze dried antler by 0.8N HCl was 72.25%(4.60, absorbance at 280 nm), that of heat dried antler was 71.14%(4.70 absorbance at 280 nm), and that of antler was 79.82% (2.80, absorbance at 280 nm), respectively. Extraction rate of freeze dried antler through three processing steps was 98.15%, that of heat dried antler was 97.35%, that of antler was 99.14%, respectively. The result of analysis by HPLC shows that high molecular pe which appears in young antler and antler extraction was changed into a small molecular peak of about 1,000 by the reaction of protease, and protein of about MW 70,000 was extracted from their remaining residue by 0.8N HCl. The above result shows that water extraction and protease extraction in the freeze dried young antler, protease extraction and HCl extraction in dried young antler, and HCl extraction in antler are most effective.

Semiconductor laser-based absorption spectroscopy for monitoring physical vapor deposition process (증기증착 공정 감시를 위한 반도체 레이저 흡수 분광학)

  • 정의창;송규석;차형기
    • Journal of the Korean Vacuum Society
    • /
    • v.13 no.2
    • /
    • pp.59-64
    • /
    • 2004
  • A study on the semiconductor laser-based atomic absorption spectroscopy was performed for monitoring physical vapor deposition process. Gadolinium metal was vaporized with a high evaporation rate by electron beam heating. Real-time atomic absorption spectra were measured by using tunable semiconductor laser beam at 770-794 nm (center wavelength of 780 nm) and its second harmonic at 388-396 nm. Atomic densities of metal vapor can be calculated from the absorption spectra measured. We plot the atomic densities as a function of the electron beam power and compare with the evaporation rates measured by quartz crystal monitor. We demonstrate that the semiconductor laser-based spectroscopic system developed in this study can be applied to monitor the physical vapor deposition process for other metals such as titanium.

Effect of Light Wavelengths on the Mycelial Browning of Lentinula edodes Strain Sanjo 701ho (광 파장이 표고 품종 산조 701호 균사의 갈변에 미치는 영향)

  • Seo, Dong-Seok;Koo, Chang-Duck
    • The Korean Journal of Mycology
    • /
    • v.47 no.1
    • /
    • pp.63-73
    • /
    • 2019
  • Mycelial browning, which protects the organism from contamination and moisture loss, is essential for sawdust cultivation of Lentinula edodes. The effects of light and light wavelengths on the mycelial browning of the L. edodes Sanjo 701ho strain, and the characteristics of its brown hyphae, were investigated. After the mycelia were cultured on potato dextrose agar medium under fluorescent lamps covered with colored cellophane filters (red, green, and blue) or under light emitted diodes (LED), with wavelengths ranging from 400 to 700 nm (far-red, red, green, and blue), for 14 h per day for 40 days, the mycelial browning rate was measured. The wavelength of fluorescent lamps, which range from 300 to 1,100 nm, was reduced to 360 to 1,022 nm with the use of three colored cellophane filters and the photosynthetic photon flux density was reduced by 42 to 71 % depending on the light wavelength. The browning rate by colony area of mycelia exposed to light was at an average of 64 %, whereas, that of unexposed mycelia was only 5 %. The browning rate was 0.02 % in far-red, 1.5 % in red, 53.8 % in green, 57.3 % in blue, and 64.0 % in fluorescent light. The white mycelia were resilient with actively growing hyphae, filled with cytoplasm, and thin cell walls less than $1{\mu}m$ thick. Conversely, the brown mycelia possessed dead, hard hyphal structures without cytoplasm, but with approximately $2-4{\mu}m-thick$-thick cell walls. In conclusion, lights of varying wavelengths, especially short-wavelength LEDs, are effective for forming dead, brown mycelia of L. edodes, thus, forming a protective functional layer for its living white mycelia.

Isolation, Structure Determination and Biological Activity of 25-Epi, $3{\alpha}-Carboxyacetylquercinic$ Acid in Daedalea dickinsii (띠미로버섯 중 25-Epi, $3{\alpha}-Carboxyacetylquercinic$ Acid의 분리정제, 구조결정 및 생리활성)

  • Bae, Kang-Gyu;Min, Tae-Jin
    • Journal of the Korean Chemical Society
    • /
    • v.44 no.1
    • /
    • pp.37-44
    • /
    • 2000
  • In order to develope bioactive substances, dried fmit body of Daedalea dickinsii collected from Taeback mountain was extracted with ethanol, The compounds 1 and 2 were purified by solvent extraction, silica gel column chromatography and recrystallization from the ethanol extracts. Melting point, molecular weight and molar extinction coefficient of the compound 1 were estimated to be $167{\sim}168^{\circ}C$, 572 and 5,040 at 208 nm. The structure of this compound 1 has been elucidated to be 24S, 25S, $3{\alpha}-carboxyacetylquercinic$ acid using spectroscopic properties. This compound showed antibiotic activities against fungi, yeasts and bacteria and it also showed anticancer activity $IC_{50}=64.5\;{\mu}M$) against Korean stomach cancer cell. Melting point, molecular weight and molar extinction coefficient of the compound 2 were estimated to be $233{\sim}235^<\circ}$, 572 and 5,080 at 208 nm. The structure of this compound was elucidated to be 24S, 25R, $3{\alpha}-carboxyacetylquercinic$ acid. The compound 2 showed different antibiotic activities with the compound 1.

  • PDF

Basic characteristics of metal-ferroelectric-insulator-semiconductor structure using a high-k PrOx insulator layer

  • Noda, Minoru;Kodama, Kazushi;Kitai, Satoshi;Takahashi, Mitsue;Kanashima, Takeshi;Okuyama, Masanori
    • Electrical & Electronic Materials
    • /
    • v.16 no.9
    • /
    • pp.64.1-64
    • /
    • 2003
  • A metal-ferroelectric [SrBi$_2$Ta$_2$O$\_$9/ (SBT)-high-k-insulator(PrOx)-semiconductor(Si) structure has been fabricated and evaluated as a key part of metal-ferroelectric-insulator-semiconductor-field-effect-transistor MFIS-FET memory, aiming to improve the memory retention characteristics by increasing the dielectric constant in the insulator layer and suppressing the depolarization field in the SBT layer. A 20-nm PrOx film grown on Si(100) showed both a high of about 12 and a low leakage current density of less than 1${\times}$ 10e-8 A/$\textrm{cm}^2$ at 105 MV/cm. A 400-nm SBT film prepared on PrOx/Si shows a preferentially oriented (105) crystalline structure, grain size of about 130 nm and subface roughness of 3.2 nm. A capacitance-voltage hysteresis is confirmed on the Pt/SBT/PrOx/Si diode with a memory window of 0.3V at a sweep voltage width of 12 V. The memory retention time was about 1 104s, comparable to the conventional Pt/SBT/SiO$\_$x/N$\_$y/(SiO$\_$N/)/Si. The gradual change of the capacitance indicates that some memory degradation mechanism is different from that in the Pt/SBT/SiON/Si structure.

  • PDF