• Applied Chemistry for Engineering
• /
• v.27 no.2
• /
• pp.165-170
• /
• 2016

In this study, we investigated the cause of the decrease in activities of $VO_x/TiO_2$ SCR catalyst used for the burner reactor at a scale of $150000Nm^3/hr$ using X-ray diffraction (XRD), brunauer-emmett-teller (BET), atomic emission spectroscopy inductively coupled plasma (AES ICP), $H_2$ temperature programmed reduction ($H_2$-TPR), and $NH_3$ temperature programmed desorption ($NH_3$-TPD) analysis. Since the crystallization of the $VO_x$ and phase transition of $TiO_2$ did not occur, it was concluded that the catalyst was not deactivated by the thermal effect. In addition, from the elemental analysis showing that a large quantity of calcium was detected but not sulfur, the deactivation process of the $VO_x/TiO_2$ SCR catalyst was mainly caused by Ca but not by $SO_2$. The calcium was also found to decrease the catalytic activity by means of reducing $NH_3$ adsorption.

• Journal of Environmental Science International
• /
• v.26 no.1
• /
• pp.109-118
• /
• 2017

This study was conducted to investigate the effects of intermittent plasma and electrolysis treatments on lettuce (Lactuca sativa var. oak-leaf.), nutrient solution components ($NO_3{^-}-N$, $NH_4{^+}-N$, $PO{_4}^{3-}-P$, $K^+$, $Ca^{2+}$ and $Mg^{2+}$) and environmental parameters (electrical conductivity, total dissolved solids and pH). The recirculating hydroponic cultivation system consisted of planting port, LED lamp, water reservoir and circulating pump. Nutrient solution was circulated in the following order: reservoir ${\rightarrow}$ filtration-plasma or filtration-electrolysis ${\rightarrow}$ planting port ${\rightarrow}$ reservoir. The results showed that nutrient solution components and environmental parameters were changed by plasma or electrolysis treatment. Lettuce growth was not affected by the intermittent plasma or electrolysis treatment with 30 minutes or 90 minutes, respectively. The roots of the lettuce was damaged by excessive plasma and electrolysis treatment. Electrolysis treatment had greater effect on than plasma treatment because of the accumulation of high levels of TRO (Total Residual Oxidants).

• Journal of the Microelectronics and Packaging Society
• /
• v.8 no.1
• /
• pp.13-18
• /
• 2001

Carbon nanotubes (CNTs) were grown on Ni-coated glass substrates by catalytic chemical vapor depositors (CVD) using RF plasma under $600^{\circ}C$. Various types of CNTs were obtained by different growth temperature, etching period and thickness of Ni catalyst. $NH_3$ or $H_2$ gas was used as a etching gas, then $C_2H_2$ gas was flowed as carbon source. Vertically aligned CNTs with diameter of 150 nm and length of 3 $\mu\textrm{m}$ were observed by SEM. CNTs synthesized by catalytic CVD using RF plasma should be expected to FED emitter.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.21 no.7
• /
• pp.708-718
• /
• 2020

Offensive odor is recognized as a social environmental problem due to its olfactory effects. Ammonia(NH₃), hydrogen sulfide(H₂S) and benzene(C₆H₆) are produced from various petrochemical plants, public sewage treatment plants, public livestock wastes, and food waste disposal facilities in large quantities. Therefore efficient decomposition of offensive odor is needed. In this study, the removal efficiency of atmospheric-pressure plasma operating at an ambient condition was investigated by evaluating the concentrations at upflow and downflow between the plasma reactor. The decomposition of offensive odor using plasma is based on the mechanism of photochemical oxidation of offensive odor using free radical and ozone(O₃) generated when discharging plasma, which enables the decomposition of offensive odor at ordinary temperature and has the advantage of no secondary pollutants. As a result, all three odor substances were completely decontaminated within 1 minute as soon as discharging the plasma up to 500 W. This result confirms that high concentration odors or mixed odor materials can be reduced using atmospheric-pressure plasma.

• Journal of Korean Vacuum Science & Technology
• /
• v.3 no.2
• /
• pp.121-125
• /
• 1999

Vertically well aligned multiwall carbon nanotubes were grown on nickel coated different substrates by plasma enhanced hot filament chemical vapor deposition at low temperatures below 650$^{\circ}C$. Acetylene and ammonia gas were used as the carbon source and a catalyst. The surface roughness of nickel layer increased as NH3 etching time increased. The diameters of the nanotubes decreased and the density of nanotubes increased as NH3 etching time increased. diameter of nanotube was 30 to 70 nm. Nickel cap was observed on the top of the grown nanotube and very thin carbon amorphous layer was fonde on the nickel cap.

• Journal of the Korean Institute of Electrical and Electronic Material Engineers
• /
• v.11 no.5
• /
• pp.365-370
• /
• 1998

We studied a electrical properties in GaAs/AlGaAs/InGaAs pseudomorphic high electron mobility transistors(PHEMT s) recessed by electron cyclotron resonance(ECR) plasma and wet etching. Using the $NH_4OH$ solution, a nonvolatile AlF$_3$layer formed on AlGaAs surface after selective gate recess is effectively eliminated. Also, we controlled threshold voltage($V_th$) using $H_3PO_4$ etchant. We have fabricated a device with 540 mS/mm maximum transconductance and -0.2 V threshold voltage by using $NH_4OH$ and $H_3PO_4$dip after ECR gate recessing. In a 2-finger GaAs PHEMT with a gate length of 0.2$\mu m$ and width of 100 $\mu m$, a current gain of 15 dB at 10 GHz and a maximum cutoff frequency of 58.9 GHz have been obtained from the measurement of current gain as a function of frequency at 12mA $I_{dss}$ and 2 V souce-drain voltage.

• Journal of the Korea Organic Resources Recycling Association
• /
• v.31 no.3
• /
• pp.43-53
• /
• 2023

This batch experiment evaluated the impacts of major plant nutrient releases by applying the modified Hyperbola model on the leachates and N₂O emissions from incorporated rice hull biochar with organic fertilizer materials. The treatments consisted of the control as incorporated with organic fertilizer materials, the incorporated rice hull biochar with organic fertilizer materials, and the incorporated plasma-activated rice hull biochar with organic fertilizer materials under redox conditions. The results indicated that the maximum release amount of NH₄-N was 3486.3 mg L^-1 in the control, and their reduction rates of NH₄-N, NO₃-N, PO₄-P, and K were 8.0%, 17.5% 44.3.0% and 8.7%, respectively, relative to the control. In the control, the highest soluble amount of PO₄-P was 681.0 mg L^-1. The estimations for accumulated NH₄-N, NO₃-N, PO₄-P, and K-releases in all the treatments were significantly (p<0.01) fitted with a modified Hyperbola model. For greenhouse gas emissions, the lowest cumulative N₂O was 340.4 mg kg^-1 in the soil incorporated with plasma-activated rice hull biochar, and the reduction rates were 27.8% and 86.4% in the rice hull biochar and plasma-activated rice hull biochar treatments, respectively, compared to the control. Therefore, it concluded that the incorporated rice hull biochar can be especially useful for controlling PO₄-P release and N₂O emissions for bio-fertilizer applications.

• Applied Chemistry for Engineering
• /
• v.16 no.3
• /
• pp.413-421
• /
• 2005

This study focused on the decomposition of toluene in a plasma-photocatalytic hybrid system. Hexagonally packed meso-structured Mn-titanosilicates (Mn-Ti-MCM-41), as the photocatalysts, have been prepared by the hydrothermal method. The physical properties of the photocatalysts were characterized using XRD, XPS, TEM, BET/ICP, and $NH_3$/Toluene-TPD. Experiments were carried out at the applied voltage of 9.0 kV and at room temperature of $20^{\circ}C$. In the plasma only system, the activity of the toluene decomposition was higher than that in the photocatalytic system. However, the amount of by-products, such as phenol, $C_2{\sim}C_4$ alkene, was also increased in the plasma only system. However, the by-products decreased remarkably in a plasma-photocatalytic hybrid system. When Mn5mol%-Ti-MCM-41 was used as a photocatalyst in a plasma-photocatalytic hybrid system, the $CO_2$ selectivity in products was increased dramatically compared to other catalysts. It was confirmed that a plasma-photocatalytic hybrid system was better for toluene decomposition compared to photocatalytic and plasma only systems.

• Membrane Journal
• /
• v.11 no.1
• /
• pp.38-49
• /
• 2001

The surface of polyimide membrane was modified by plasma treatment using Ar and NH~. and the permeability and selectivity for the mixture gas $(CO_2/N_2=20/80 vol%)$ were measured. The per¬meation experiments were performed by a variable volume method at $30^{\circ}$C and total pressure of 5 atm, The effect of the plasma conditions such as treatment time, power input, gas flow rate and pressure in the reactor on the transport Dwperties of modified membranes was investigated. The surface of the plasma treated membrane was analyzed by means of FTlR - ATH, ESCA and AFM. The dependences of the wettability and the etching on plasma treatment time were investigated by use of the contact angle and the weight loss measurement. Measurements of gas pcnneability characteristic were performed using both dry and wet membranes. The effects of experimental conditions such as temperature on the membrane performance were studied.

• Journal of the Korean Crystal Growth and Crystal Technology
• /
• v.4 no.4
• /
• pp.370-377
• /
• 1994

DC plasma torch which is a non-transferred type was constructed and silicon nitride powders were produced. Ar gas is used as a plasma gas and gas reactants with the carrier gas are introduced beneath the plasma ignition part. Two slits are attached and a reactive quenching gas is introduced through them. Using $SiCl_4 and NH_3$ as starting materials, silicon nitride powders were produced. As-produced powders were amorphous and crystalline silicon nitrides were obtained by heating at $1420^{\circ}C$ for two hours under nitrogen atmosphere. Silicon nitride phase was identified in the XRD patterns and IR spectrum, and the image of the powders before and after heating was observed from the TEM analysis.