• Journal of the Korean Institute of Landscape Architecture
• /
• v.36 no.2
• /
• pp.60-68
• /
• 2008

Three land-use limitations including water hazard, soil erosion and fallow potential were evaluated to define an unfair area. Landscape indices in the unfair areas, defined by evaluations before and after landscape enhancement, were computed by Fragstats v3.3 and compared in order to propose a landscape enhancement plan. The results are as follows: First, as a result of the land evaluation, 388.56ha was analyzed for the 1st class(S1), 623.25ha for the 2nd class(S2), 138.08ha(S3s: 82.47ha, S3e: 51.88ha) for the 3rd class(S3), 230.44ha(N1w: 194.91ha, N1e: 23.09ha, N1es: 13.94ha) for the 4th class(N1), and 67.91ha(N2w: 60. 89ha, N2es: 7.02ha) for the 5th class(N2). The classes under the 3rd class(including the 3rd class) were determined as an unfair area, and proposed landscape enhancement for them. Second, it was proposed that unfair areas with potential water hazards(N1 w, N2w) be restored as a wetland and buffer zone. At this point, the farmers owning these fields could be compensated using the direct payment for landscape conservation(DPLC). Areas witha relatively lower slope(S3e) or a steep slope(N1e) containing soil erodibility potential were proposed to be restored as a sod-culture-applied field and substitute vegetation or potentially natural vegetation, respectively. The unfair areas having fallow potential(S3s, N1es, N2es) were proposed to apply special use crops for the S3s fields, native plants for the N1es fields, and intended fallow for the N2es fields. Third, after landscape enhancement, theforest had higher values in the indices of NP, PLAND, LSI, IJI, and TCA, while paddy and upland had lower values in most indices except NP and LSI. The forest patches increased and were more plentiful with their restoration and had much greater possibility to join with nearby patches. With continued restoration, forest patches will have a large core area and small number of patches due to the conglomeration of patches, which positively influences the species of diversity in the forest patches.

• The Korean Journal of Air & Space Law and Policy
• /
• v.35 no.3
• /
• pp.127-150
• /
• 2020

A Basic Plan for the Promotion of Space Development (hereinafter referred to as "basic plan"), which prescribes mid- and long-term policy objectives and basic direction-setting on space development every five years, is one of the matters to be deliberated by the National Space Committee. Confirmed February 2018 by the Committee, the 3rd Basic Plan has a unique matter, compared to the 2nd Basic Plan. It is to construct "Korean Positioning System(KPS)". Almost every country in the world including Korea has been relying on GPS. On the occasion of the shooting down of a Korean Air flight 007 by Soviet Russia, GPS Standard Positioning Service has been open to the world. Due to technical errors of GPS or conflict of interests between countries in international relations, however, the above Service can be interrupted at any time. Such cessation might bring extensive damage to the social, economic and security domains of every country. This is why some countries has been constructing an independent global or regional satellite navigation system: EU(Galileo), Russia(Glonass), India(NaVic), Japan(QZSS), and China(Beidou). So does South Korea. Once KPS is built, it is expected to make use of the system in various areas such as transportation, aviation, disaster, construction, defense, ocean, distribution, telecommunication, etc. For this, a pan-governmental governance is needed to be established. And this governance must be based on the law. Korea is richly experienced in developing and operating individually satellite itself, but it has little experience in the simultaneous development and operation of the satellites, ground, and users systems, such as KPS. Therefore we need to review overseas cases, in order to minimize trial and error. U.S. GPS is a classic example.

• Korean journal of applied entomology
• /
• v.47 no.1
• /
• pp.87-93
• /
• 2008

Bacillus thuringiensis with selected high toxicities against tobacco cutworm, Spodoptera litura were isolated from domestic soils. When being observed under a phase-contrast microscope, the insecticidal crystal proteins were showed a bipyramidal crystal types. New CAB 109 isolate was identified to B. thuringiensis subsp. aizawai in the H serotype. As a results of insecticidal activities between CAB 109 isolate and 3 existing ready-made products against 3rd larva of S. litura, CAB 109 isolate showed 100% mortality with spore concentration $(1.3{\times}10^7cfu/ml)$. It was a very high insecticidal activity compared with a existing ready-made B. t. products. $LD_{50}$ values of CAB 109 isolate was $9.78{\times}10^5,\;6.87{\times}10^6\;and\;1.83{\times}10^7cfu/ml$ spore concentration against 2nd, 3rd and 4th larva of S. litura, respectively. Unlike Plutella xylostella, S. litura was slowly died after application up to 7 days. The weight of S. litura larva applied with CAB 109 isolate were 6-7 times less than controlled group. Even though it didn't die, it did not grow into next larva. The result observed with scanning electron microscope was that CAB 109 isolate of B. t. aizawai formed a typical bipyramidal crystal protein type. Otherwise, when CAB 109 isolate was examined with SDS-PAGE and with trypsin, there was no difference between CAB 109 strain and ready-made products of B. thuringiensis.

• The Journal of Korean Academy of Prosthodontics
• /
• v.50 no.3
• /
• pp.149-155
• /
• 2012

Purpose: The purpose of this study was to investigate the influence of mobilization on bone-implant interface prior to osseointegration of fixtures. Materials and methods: The experimental implants (3.75 mm in diameter, 4.0 mm in length) were made of commercially pure (Grade IV) titanium, and were treated with RBM ($MegaGen^{(R)}$: Ca-P). The 80 implants (two in each tibia) were inserted into the monocortical tibias of 20 rabbits which each weighed more than 3.5 kg (Female, New Zealand White). According to the removal torque interval, the groups were divided into 10 groups, Group I (6 wks), Group II (4 days+6 wks), Group III (4 days+1 wk+6 wks), Group IV (1 wk+6 wks), Group V (1 wk+1 wk+6 wks), Group VI (2 wks+6 wks), Group VII (2 wks+ 1 wk+6 wk), Group VIII (3 wks+6 wks), Group IX (3 wks+1 wk+6 wks) and Group X (10 wks). The control groups were Group I and X, the removal torque was measured at 6 wks and 10 wks with a digital torque gauge (Mark-10, USA). In the experimental groups, the removal torque was given once or twice before the final removal torque and the value was measured each time. After which, the implants were put back where they had been except the control groups. All the experimental groups were given a final healing time (6 wks) before the final removal torque test, in which values were compared with the control groups and the 1st and/or 2nd removal torque values in each experimental group. Results: In the final removal torque tests, the removal torque value of Group X (10 wks) was higher than that of Group I (6 wks) in the control groups but not statistically different. There were no significant differences between the experimental groups and control groups (P>.05). In the first removal torque comparison, the experimental groups (4 days or 1 wk) values were significantly lower than the other experimental groups (2 wks or 3 wks). In the comparison of each experimental group according to healing time, the final removal torque value was significantly higher than the 1st torque test value. Conclusion: Once or twice mobilization of fixture prior to osseointegration did not deter the final bone to implant osseointegration, if sufficient healing time was given.

• The Journal of Korean Academy of Prosthodontics
• /
• v.52 no.2
• /
• pp.105-112
• /
• 2014

Purpose: The aim of present investigation was to find out the influence of several times iatrogenic mobilization in the initial stage of implant installation on bone-implant osteointegration. Materials and methods: The experimental implants (3.75 mm in diameter, 8.0 mm in length) were made of commercially pure (Grade IV) titanium, and were treated with RBM ($MegaGen^{(R)}$: Ca-P) on lower 4.0 mm part. Only lower part of implant was inserted to bone and the implants were nonsubmerged. The 130 implants (two in each tibia) were inserted into the monocortical tibias of 33 rabbits which each weighed more than 3.5 kg (Female, New Zealand White). According to the removal torque interval, the groups were divided into 13 groups, group I (1 day), group II (1 day + 2 days), group III (1 day + 2 days + 3 days), group IV (1 day + 2 days + 3 days + 4 days), group V (2 days), group VI (2 days + 4 days), group VII (2 days + 4 days + 6 days), group VIII (2 days + 4 days + 6 days + 8 days), group IX (4 days), group X (4 days + 7 days), group XI (4 days + 7 days + 10 days), group XII (4 days + 7 days + 10 days + 14 days) and control group. In the control group, the removal torque was measured at 8 weeks with a digital torque gauge (Mark-10, USA). In the experimental groups, the removal torque was given once, twice, three times or four times by experiment design before the final removal torque and the value was measured each time. The implants were then screwed back to their original positions. All the experimental groups were given a final healing time of 8 weeks after placement, in which values were compared with the control groups and the 1st, 2nd, 3rd or 4th removal torque values in each experimental group. Results: In comparison of the final removal torque tests among experimental groups, the removal torque value of experimental groups except group XII were not statistically different that of control group. And the values of group I and II were significantly higher than the values of group VI, VIII, X, XI, and XII. In addition, the values of group III, IV, and V were significantly higher than group XI and XII. In comparison of the removal torque in the each experimental group, the final removal torque were significantly higher in all groups except group VIII, X, XI, and XII. Conclusion: If sufficient healing time was allowed, a few mobilization of fixture at the very early stage after the implant placement in the rabbits didn't interrupt the final bone to implant osseointegration.

• Journal of Bio-Environment Control
• /
• v.23 no.1
• /
• pp.56-59
• /
• 2014

Apex removal is a common practice in artichoke cultivation to harvest heads of lateral shoots. This experiment was carried out to investigate the effect of apex removal by different planting times on the growth and yield of Artichoke (Cynara scolymus L.) in open field. Two treatments (apex removal and no apex removal) at three different planting times ($1^{st}$: Sep. 27, 2011, $2^{nd}$: March 29, 2012, and $3^{rd}$: Sep. 21, 2012) were tested using 'Green Globe' variety. There was no difference in the head characteristics and the number of harvested head between the treatments. The head weight was heavier in no apex removal of 242.7 g than the apex removal of 170.8 g. The yield also increased in no apex removal by 25% (1,249 kg/10a) compared to the apex removal of 997 kg/10a at the first planting time. At the second planting time, there was no difference in the head weights between the treatments. But the number of the harvested head was higher in no apex removal with 10.8 than 8.2 of the apex removal. The yield of no apex removal was 2,660 kg/10a, which was higher than 1,848 kg/10a of apex removal. At the third planting time, the head weight increased in no apex removal with 253.5 g compared to the apex removal with 218.7 g. The yield of no apex removal was 1,405 kg/10a, which was higher than 1,148 kg/10a of the apex removal. All the tests at 3 different planting times showed that the artichoke yields were higher in no apex removal than in apex removal. Therefore, it is desirable to cultivate artichoke without removing the apex for the higher yield and labor saving in open-field cultivation in Jeju island.

• Journal of the Korean Society of Radiology
• /
• v.6 no.5
• /
• pp.365-371
• /
• 2012

The radiation therapy treatment technique is developed from 3D-CRT, IMRT to Tomotherapy. and these three technique was most widely using methods. We find out a comparison normal tissue doses and tumor dose of 3D-CRT, IMRT(Linac Based), and Tomotherapy on Head and Neck Cancer. We achieved radiological image used the Human model phantom (Anthropomorphic Phantom) and it was taken CT simulation (Slice Thickness : 3mm) and GTV was nasopharngeal region and PTV(including set-up margin) was GTV plus 2mm area. and transfer those images to the radiation planning system (3D-CRT - ADAC-Pinnacle3, Tomotherapy - Tomotherapy Hi-Art System). The prescription dose was 7020 cGy and measuring PTV's dose and nomal tissue (parotid gland, oral cavity, spinal cord). The PTV's doses was Tomotherapy, Linac Based - IMRT, 3D-CRT was 6923 cGy, 6901 cGy and 6718 cGy its dose value was meet TCP because its value was up to the 95% based on 7020 cGy, Nomal tissue (parotid gland, oral cavity, spinal cord) was 1966 cGy(Tomotherapy), 2405 cGy(IMRT), 2468 cGy(3D-CRT)[parotid gland], 2991 cGy(Tomotherapy), 3062 cGy(IMRT), 3684 cGy (3D-CRT)[oral cavity], 1768 cGy(Tomotherapy), 2151 cGy(IMRT), 4031 cGy(3D-CRT)[spinal cord] its value did not exceeded NTCP. All the treatment techniques are equated with tumor and nomal tissue doses. The 3D-CRT was worse than other techniques on dose distribution, but it is reasonable in terms of TCP and NTCP baseline Tomotherapy, IMRT -dose distribution was relatively superior- was hard to therapy to claustrophobic patients and patients with respiratory failure. Particularly, in case on Tomotherapy, it take MVCT before treatment so dose measurement will be unnecessary radiation exposure to patients. Conclusion, Tomotherapy was the best treatment technique and 2nd was IMRT, and 3rd 3D-CRT. But applicable differently depending on the the patient's condition even though dose not matter.

• Korean Journal of Soil Science and Fertilizer
• /
• v.33 no.4
• /
• pp.292-301
• /
• 2000

To make a better use of the beneficial bacterial inoculants in the agricultural practice, dry forms of bacterial fertilizer or pesticides are prepared with carrier materials. During the drying process of bacterial inoculant, most of the cells face a severe osmotic pressure and dehydration, and die off. Our study describes the effect of osmoprotectants such as trigonelline and trehalose on the survival of bacterial cells in high salt concentration and drying conditions. A fluorescent Pseudomonas, strain SSL3, used in this study, could grow in high salt concentration of upto 5% but the cells could not overcome the growth retardation at over 7% of salt concentration. The addition of trigonelline, even on small amount, in liquid medium containing 4% NaCl was detrimental to the cell. However, the addition of trehalose of upto 10 mM to the liquid medium containing 4% NaCl, enhanced cell growth. The cell growth was retarded when 150mM trehalose was added to the medium. Upon dry formulation of cells, trehalose was added. And the dry cells were inoculated into the soil to determine the effect of osmoprotectants on the survival of the cells. The survival of the cells, both in wet or dry soil, was improved by the addition of trehalose during the dry cell formulation. The positive effect of trehalose on the cell survival at $-20^{\circ}C$ and $-70^{\circ}C$ was oven more pronounced. The FTIR (Fourier transformation infra-red) spectroscopic analysis showed that the change of the 2nd amide group was reduced by adding trehalose to the medium containing 4% NaCl. These results suggest that trehalose can protect the cell membrane from dryness or high concentration of salt, thereby diminishing the sudden change of the protein structure of the cell membrane and, as a consequence, improving the cell survival.

• Tuberculosis and Respiratory Diseases
• /
• v.66 no.2
• /
• pp.93-97
• /
• 2009

Background: Belotecan (Camtobell, CKD-602, Chongkundang Pharm., Korea), a camptothecin derivative, has anticancer effects by inhibiting topoisomerase I such as topotecan. This study observed the response, survival and toxicity of belotecan monotherapy after the failure of etoposide and platinum (EP). Methods: Forty nine small cell lung cancer (SCLC) patients (M/F=41/8; age, 64.5${\pm}$7.6 (mean${\pm}$SD) years), who failed in their first line chemotherapy were enrolled in this study. Twenty one SCLC patients showed relapsed lung cancer more than 90 days after their priorEP chemotherapy (sensitive relapse group, SR) and 28 patients relapsed within 90 days (refractory relapse group, RR). Results: The response rate was 25%. Eleven patients showed partial responses and 5 patients could not be checked. The response rate of the SR and RR patients was similar. The relative dose intensity was lower in the responders (78${\pm}$15%) than non-responders (83${\pm}$13%, p=0.03). The median survival time (MST) was 10.3 months (290 days). The MST of the non-responders and responders was 186 days (95% CI; 67-305) and 401 days (95% CI; 234-568, p=0.07), respectively. The median progression free survival (MPFS) was similar in the SR (79 days) and RR (67 days) patients. Grade 3-4 neutropenia, anemia, and thrombocytopenia were observed in 59.6%, 12.8% and 23.4% of patients, respectively. Conclusion: The efficacy and survival were demonstrated in the second-line setting. However, a randomized comparative trial with topotecan will be needed.

• Journal of the korean academy of Pediatric Dentistry
• /
• v.28 no.3
• /
• pp.488-495
• /
• 2001

Treatment of class II malocclusions require distalization of maxillary molars into class I relationship. Intraarch distal molar movement techniques have recently assumed an important role in young patients. In this study, the dental and skeletal effects of the pendulum appliance were evaluated by means of cephalometric radiographs. The samples were consisted of 19 patients: 11 females and 8 males, mean age $11.68{\pm}1.52$ years. Measurements were obtained from cephalometric prior to and the day of removal of the pendulum appliance. Treatment changes were analyzed. The following results were obtain. 1. The pendulum appliance produced $2.94{\pm}1.54mm$ distal molar movement with a mean intrusion of $1.17{\pm}0.97mm$, mean period $18.13{\pm}7.95$ weeks. 2. The anchor tooth was $1.34{\pm}1.40mm$ forward movement and $0.48{\pm}0.99mm$ extrusion, and labial tilting of incisors. 3. The angle between palatal plane and mandibular plane increased significantly. 4. There was no significant difference in according to 2nd molar position. 5. Total movement was consisted of 74% distal movement of 1st molar and 26% forward movement of the anchor tooth.