• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2005.07a
• /
• pp.176-177
• /
• 2005

PDMS는 생명공학 분야에서 중요한 기술적 폴리머이다. Nd:YAG레이저의 4고조파 ($\lambda$=266nm, pulse) 레이저를 사용하여 표면 처리를 하여 PDMS 표면의 습윤성과 접착성의 향상됨을 확인하였다. 식각한 PDMS는 샘물체의 미세회로에 사용될 수 있다. 본 논문은 레이저 빔의 주사속도를 변화시키며 PDMS를 레이저로 식각하며 PDMS의 식각 특성을 연구한다 식각 특성을 의존성이 가장 효과적인 주사 속도에 대한 의존성을 규명하고자 스테이지 컨트롤러의 속도를 변화시키며 실험하였다. 그리고 최적의 레이저 출력값을 알아내려고 레이저 출력값을 조절하며 실험 하였다. 단차측정기(알파스템)을 이용하여 식각형상과 식각 효율 등을 분석하였다.

• Journal of the Korean Society of Mechanical Technology
• /
• v.13 no.1
• /
• pp.95-103
• /
• 2011

Robots in various types carry and assemble parts through repeatedly and accurately moving to stored locations by combining linear motions. And, linear systems are used in orthogonal axes of robots and driven via ball screws, such as 2-axis cartesian coordinate robot in this paper. This paper presents the effect of the linear motion guide that is used in $2^{nd}$ axis in 2-axis cartesian coordinate robot. Some simulation results show that the linear motion guide influence greatly in robot performance such as the nominal life of linear guide. When use LM guide that have capacity near in $2^{nd}$ axis, this paper show that the nominal life on LM block of $1^{st}$ axis increases 37.4% and that the specification of $2^{nd}$ axis LM guide influences greatly the nominal life of $1^{st}$ axis LM block.

• Proceedings of the Korean Society Of Semiconductor Equipment Technology
• /
• 2005.09a
• /
• pp.68-72
• /
• 2005

본 논문에서는 $Bi_{3}Ti_{4}O_{12}$에 Nd를 치환했을 때 향상되는 강유전체 특성을 sol-gel 방법을 이용하여 분석하였다. 이를 위해 $10\;wt\%$의 $12\%$과량의 Bi가 첨가된 $Bi_{3.15}Nd_{0.85}Ti_{13}O_{12}$ sol-gel 용액을 제작하였다. BNT 박막은 $Pt/TiO_2/SiO_2/Si$ 기판 위에 스핀 코팅 방법을 이용하여 증착하였으며, 최종 증착된 박막의 조성은 Rutherford backscattering spectroscopy 분석을 이용하여 $Bi_{3.15}Nd_{0.85}Ti_{13}O_{12}$임을 확인하였다. 200 nm 두께의 BNT 박막은 XRD 분석을 통해 (117)방향에서 강한 피크가 나오며, (001) 방향에서 Nd 치환에 따른 효과로 억제된 피크가 나오는 것을 확인하였다. Pt/BNT/Pt 구조를 이용하여 잔류분극을 측정한 결과 7 V에서 $48\;{\mu}\;C/cm^2$ 이 나왔다. 이것은 다른 강유전체 물질인 PZT, SBT, BLT보다 월등히 큰 값이다.

• Journal of Magnetics
• /
• v.5 no.4
• /
• pp.130-134
• /
• 2000

Using the current-applied pressure-assisted (CAPk) process, we could obtain fully dense isotropic and anisotropic NdFeB magnets from rapidly quenched MQP-A powder. The Nd content is found to play an important role during the current applied (CA)-pressing and CA-deformation processes. The $(BH)_max$ of CA-pressed and CA-deformed magnets are 131 kJ/$m^3$ (16.5 MGOe) and 352 kJ/$m^3$(44.2 MGOe), respectively. The change in texture of CA-deformed anisotropic NdFeB magnets with thickness reduction was investigated by pole figures and the (006) texture was found to increase with greater thickness reductions. As the thickness reduction increases from 50% to 60% to 80%, $W_50$ (the average angle of the contour with 50% intensity) decreases from $76^\circ$to $62.5^\circ$to $17^\circ$.

• Journal of Magnetics
• /
• v.20 no.1
• /
• pp.21-25
• /
• 2015

Fine Nd-Fe-B-type particles were prepared by ball milling of different types of Nd-Fe-B precursor materials, such as die-upset magnet, HDDR-treated material, and sintered magnets. Coercivity dependence on the grain and particle size of the powder was investigated. Coercivity of the milled particles was reduced as the particle size decreased, and the extent of coercivity loss was dependent upon the precursor material. Coercivity loss in the finely milled particles was attributed to the surface oxidation. The extent of coercivity loss in the fine particles was closely linked to grain size of the precursor materials. Coercivity loss was more profound for the fine particles with larger grain size. Contrary to the fine particles from the sintered magnets with larger grain size the fine particles (~10 um) from the die-upset magnet and HDDR-treated material with much finer grain size still retained high coercivity (> 10 kOe for die-upset magnet, > 4 kOe for HDDR-treated material).

• Nuclear Engineering and Technology
• /
• v.34 no.4
• /
• pp.370-381
• /
• 2002

The neutron induced nuclear data for Pr-141, Nd-143, Nd-145, Sm-147 and Sm-149 were calculated and evaluated from 10 keV to 20 MeV. The energy dependent optical model potential parameters were extracted based on the recent experimental data and applied up to 20 MeV. The s-wave strength function was calculated. Spherical optical model , statistical model in equilibrium energy, multistep direct and multistep compound model in pre-equilibrium energy and direct capture model were introduced in Empire calculation. The theoretically calculated cross sections were compared with the experimental data and the evaluated files. The model calculated total and capture cross sections were in good agreement with the reference experimental data. The capture cross sections in pre-equilibrium were enhanced in recent released Empire version. The evaluated cross section results were compiled to ENDF-6 format and will improve the ENDF/B-Vl.

• Journal of Food Hygiene and Safety
• /
• v.25 no.4
• /
• pp.402-409
• /
• 2010

The study was conducted to estimate the contents of heavy metal in commercial herbal medicines (1047 samples of 132 species) which were collected from markets in Seoul and to analyze the contents of heavy metals of herbal medicines by classifying them by parts. The samples were digested using microwave method. The contents of heavy metal (Pb, Cd, and As) and Hg were determined using Inductively coupled plasma-Mass spectrometer (ICP/MS). And the contents of Hg were obtained by Mercury analyzer. The average values of heavy metal in herbal medicines were as follows [mean (minimum-maximum), mg/kg]; Pb 0.870 (ND-69.200), As 0.148 (ND-2.965), Cd 0.092 (ND-2.010), and Hg 0.007 (ND-0.B7). And the average values of heavy metal by parts in herbal medicines were as follows [mean (minimum-maximum), mg/kg]; Ramulus 2.046 (0.065-4.474), Herba 1.886 (0.048-10.404), Flos 1.874 (0.052-5.393), Cortex 1.377 (0.011-4.837), Radix 1.165 (0.012-70.111), Rhizoma 1.116 (0.016-5.490, Fructus 0.838 (0.017-4.527), Perithecium 0.729 (0.013-4.953), Semen 0.646 (0.006-4.416). The average values of heavy metal of imported herbal medicines except Radix were higher than domestic ones. By decoction of herbal medicines exceeding the tolerances, average intake rates of Pb, As, Cd and Hg were obtained as 6.1%, 40.3%, 4.7%, and 2.2%, respectively.

• Journal of the Korean Society of Food Science and Nutrition
• /
• v.35 no.10
• /
• pp.1336-1342
• /
• 2006

This study was performed to investigate the effect of ethanol extract of Chaenomeles sinensis Koehne (CS) on alcohol-induced liver damage in rats. Male Sprague-Dawley rats weighing $135{\pm}10g$ were divided into 6 groups for 4 weeks; normal group (ND), alcohol (35%, 10 mL/kg/day) treated group (ET), CS ethanol extract 200 mg/kg/day treated group (ND-CSL), CS ethanol extract 400 mg/kg/day treated group (ND-CSH), CS ethanol extract 200 mg/kg/day and alcohol treated group (ET-CSL), and CS ethanol extract 400 mg/kg/day and alcohol treated group (ET-CSH). The body weight gain and food efficiency ratio were no differences between ND and ET. There were increases in the activities of serum alanine aminotransferase (ALT), asparate aminotransferase (AST), and alkaline phosphatase (ALP) in ET. On the other hand, the administration of CS decreased ALT, AST and ALP activities in serum. It was also observed that the hepatic activities of superoxide dismutase (SOD), catalase, glutathione peroxidase (GSH-Px) and xanthine oxidase (XO) increased by alcohol treatment were also markedly decreased in the CS administered groups as compared with ET. The activities of hepatic SOD, catalase, GSH-Px and XO were riot significantly different among the normal diet groups. Contents of thiobarbituric acid reactive substances (TBARS) were increased by the administration of alcohol, on the other hand, the administration of CS reduced TBARS value in the liver. In addition, the content of glutathione (GSH) in the liver was decreased by alcohol administration, however, GSH increased after administering CS. In conclusion, the administration of alcohol develops the hyperoxidation of liver lipids through tile increase in enzymes activity related to the lipid peroxiation, however, it was decreased after administring CS. Thus, CS may have a possible protective effect on ethanol-induced hepatotoxicity in rat liver.

• Journal of the Korean Society of Food Science and Nutrition
• /
• v.38 no.3
• /
• pp.309-318
• /
• 2009

This study was conducted to investigate the cholesterol lowering and anti-obesity effects of an ethanol extract of broccoli sprouts (BS) in rats fed high fat diet. Male Sprague-Dawley rats weighing $150{\sim}155g$, were divided into 6 groups; a normal diet group (ND), a high fat diet group (HFD), a normal diet and BS with 200 mg/kg treated group (ND-BSL), a normal diet and BS with 400 mg/kg treated group (ND-BSH), a high fat diet and BS with 200 mg/kg treated group (HFD-BSL), and a high fat diet and BS with 400 mg/kg treated group (HFD-BSH). The body weight gain and mesenteric adipose tissue weight were increased by high fat diet, but gradually decreased to the corresponding level of ND group after administration of BS extract. The liver and epididymal adipose tissue weights of HFD group were the highest among the six groups, although the difference was not significant. Food intake was lower in high fat diet groups compared with normal diet groups. The serum ALT and AST activities that were elevated by the high fat diet were significantly decreased after BS administration. Levels of serum total cholesterol, LDL-cholesterol, triglyceride and the atherogenic index tended to be decrease in the BS administered groups compared with HFD group. However, HDL-cholesterol level in serum decreased in HFD group and markedly increased in BS administered groups. There were no differences in the contents of serum triglyceride, LDL-cholesterol and HDL-cholesterol between normal diet groups. Levels of total cholesterol and triglyceride in liver and adipose tissues were also lower in BS administrated groups than in HFD group. The activities of heparin-releasable lipoprotein lipase (HR-LPL) and total-extractable LPL (TE-LPL) in adipose tissue were increased in HFD group compared with the BS administered groups, but those of the ND-BSL group and ND-BSH group were similar to ND group. These results suggest that BS ethanol extract may exert cholesterol-lowering effect and potentially reduce lipid storage.

• Journal of the Korean Ceramic Society
• /
• v.22 no.6
• /
• pp.71-79
• /
• 1985

In order to fabricate the translucent electrooptic ceramics which are comparable to PLZT, $PNZT^*$ has been prepared from aqueous solutions of their itrate and chlorides. In the quarternary $Pb^{1-x} Nd_x(Zr_{0.63} Ti_{0.37})^{1-\frac{x}{4}O_3$, (PNZT) $(0.02\le x\ge 0.12)$ system cold-pressed PNZT slugs were sintered in $O_2$ in pt-crucible for 45 min. at 118$0^{\circ}C$ and were then heat-treated in air for 60 hrs. at 120$0^{\circ}C$ in Al2O3 crucibles containing $PbZrO_3$ powder to control the atmosphere. Mean particle size of calcined PNZT powders was 0.1~0.15${\mu}{\textrm}{m}$. It was found that the maximum value of optical transmission has been revealed at 6~8 at. % $Nd_2O_3$ added body and that their dielectric constant has been decreased as the frequency increased. Curic temperature has been varied inversely with $Nd^{3+}$ ion content up to 8 at. % and become constant above this value. $^*Pb_{1-x}Nd_x(Zr_{0.63} Ti_{0.37})_{1-2/4}O_3$