• Korean Journal of Materials Research
• /
• v.11 no.7
• /
• pp.545-549
• /
• 2001

Glass-ceramics were prepared and evaluated for the properties to expand the scope of application of the rare earth aluminosilicate glasses, A glass-ceramic added with $TiO_2$as a nucleating agent, which was crystallized internally and it was characterized for physical, thermal and mechanical properties of crystal and residual glass in the glass-ceramic, X-ray diffractometer reveals an unknown crystal as $Nd_{4.6}Si_{7.6}Al_{4.0}Ti_{2.4}O_{32}$ which was found in surface and internal crystals dependent on composition and heat treatments. The thermal expansion coefficients of glass-ceramics were $5.4~6.2{\times}10^{-6}/^{\circ}C$, which increased with increasing crystal growth. Considering that the hardness and the elastic constant of crystal in glass-ceramics are 12GPa and 220GPa, respectively, the application of the glass-ceramics would be applicable for structural materials at elevated temperature.

• Proceedings of the Korean Magnestics Society Conference
• /
• 1998.10a
• /
• pp.68-69
• /
• 1998

• Proceedings of the Korean Ceranic Society Conference
• /
• 2002.10a
• /
• pp.30.2-30
• /
• 2002

• Journal of the Korean Ceramic Society
• /
• v.38 no.7
• /
• pp.672-677
• /
• 2001

Ca$_{1-x}$Nd$_{2+x}$3/TiO$_3$계에 대하여 소결 온도 변화(120$0^{\circ}C$-140$0^{\circ}C$) 및 Nd$^{3+}$ 의 치환량 (0.15$\leq$x$\leq$0.51)에 따른 마이크로파 유전특성을 조사하였다. 동일 조성의 경우 소결 온도 변화에 따라 Qf(Q=1/tan$\delta$, f=frequency)는 밀도 증가에 의해 다소 증가되었으나, 유전상수(K)는 커다란 변화가 없었다. 소결 온도가 동일한 경우 Qf는 x=0.42 조성까지는 증가하였으나, x=0.51 조성에서는 상대 밀도와 결정립 크기의 감소로 인해 감소하였다. Nd$^{3+}$ 의 치환량이 증가함에 따라 A-자리의 평균 이온 반경의 세제곱에 비례하여 유전상수(K)는 감소하였고, 공진주파수의 온도계수(TCF)는 tolerance factor(t)와 A-자리 결합원자가의 감소로 급격히 감소하였으나, 이차상 TiO$_2$의 영향으로 x=0.3 이상에서는 증가하였다.

• Korean Journal of Poultry Science
• /
• v.11 no.1
• /
• pp.49-64
• /
• 1984

During the 1978-79 Newcastle disease (ND) epizootic period, a detailed survey was conducted on the five representative farms which had been following one of the recommended vaccination programs. When the disease broke out during laying period, clinical symptoms were mild to moderate respiratory distress and greenish diarrhea. Affected flocks experienced weekly mortality from less than 1% to 17%. Egg production returned to normal 18 to 36 days after the initial signs appeared although some flocks never returned to normal. On postmortem examination,, most affected chickens showed severe hemorrhagic lesions in the duodenum, hematoma on ova, and heavy fat accmulation on various visceral organs. Most of the NO affected flocks had geometric mean hemagglutination inhibition antibody(HIA) titers of 7 log$_2$ or higher two to three weeks after the appearance of clinical signs. These HIA titers were at least 16-fold higher than those before infection. Flock mean HIA titers before infection were usually lower than 3 log$_2$. Severity of clinical signs and anamnestic antibody response were maximum in the flocks whose vaccination immunity was insufficient or waned considerably. Observations showed that even young birds, if properly vaccinated, could get effective protection from field ND exposure.

• The Journal of the Society of Korean Medicine Diagnostics
• /
• v.13 no.1
• /
• pp.19-35
• /
• 2009

Objectives : In the study on the waveform analysis of radial artery pulse diagnosis, we need to establish fundamentals of contemporary pulse diagnosis research. To achieve certain experimental basis on traditional pulse diagnosis, we have to research the differences of pulse waveform according to pressure (in 5 level) and position (Chon, Gwan, Cheok in radial artery). As a first step, in present thesis, we tried to find the differences of pulse waveform according to pressure. Methods and Results : In this research, we analyzed seven parameters of the waveform at five levels of pressure. The parameters are E(so called 'energy', a representative of pulse strength), h1(height of percussion wave) and h2(height of subincisura). The results were as follows. 1. When we analyzed the change of the waveform according to pressure in the left Gwan, E, hl, h2 and A differed between 1st and 2nd grade, between 1st and 3rd grade, between 1st and 4th grade, between 1st and 5th grade, between 2nd and 3rd grade, between 2nd and 5th grade, between 3rd and 5th grade and between 4th and 5th grade in 95% confidence interval. 2. And t2, t4 differed between 1st and 2nd grade, between 1st and 5th grade, between 2nd and 4th grade, between 2nd and 4th grade, between 2nd and 5th grade, between 3rd and 4th grade, between 3rd and 5th grade and between 4th and 5th grade in 95% confidence interval. 3. W differed between 1st and 3rd grade, between 1st and 4th grade, between 2nd and 3rd grade, between 2nd and 4th grade, between 2nd and 5th grade, between 3rd and 4th grade, between 3rd and 5th grade, and between 4th and 5th grade in 95% confidence interval. 4. And h2/h1 differed between 1st and 4th grade, between 1st and 5th grade, between 2nd and 4th grade, between 2nd and 5th grade, between 3rd and 4th grade & between 3rd and 5th grade in 95% confidence interval. 5. There were differences between 1st and 2nd grade & between 2nd and 5th grade in the case of t4/t2 in 95% confidence interval. And there were differences between 1st and 5th grade, between 3rd and 4th grade, between 3rd and 5th grade & between 4th and 5th grade in the case of W/A in 95% confidence interval. And were differences between 1st and 2nd grade, between 2nd and 3rd grade, between 2nd and 4th grade, between 3rd and 4th grade, between 3rd and 5th grade & between 4th and 5th grade in the case of A/E in 95% confidence interval. Conclusions : As mentioned above, we conclude that the waveform analysis according to five grade pressure in the left Gwan shows the difference of waveform in each grade pressure.

• Journal of the Korean Ceramic Society
• /
• v.34 no.5
• /
• pp.461-466
• /
• 1997

Dielectric and piezoelectric properties of (Pb1-1.5xLnx)(Ti0.98Mn0.02)O3 ceramics with x=0~0.2 have been investigated. Pb(Ti0.98Mn0.02)O3 showed poor sinterability and cracking on cooling, but the substitution of Nd3+ ions into Pb2+ sites resulted in dense microstructures without cracking through reducing crystallographic anisotropy. The Nd3+ substitution, however, deteriorated the temperature stability of the piezoelectric properties because of lowering the Curie point. Electromechanical anisotropy(Kt/Kp) indicated a maximum value of 10 when x=0.1. This result might be attributed to the counteracting effects that with increasing x, the lattice anisotropy decreases while the poling becomes easier due to the increase in O2- vacancy concentration. Thickness-shear mode resonators with (Pb0.85Nd0.1)(Ti0.98Mn0.02)O3 composition showed good resonant characteristics around 4.5 MHz.

• Proceedings of the Korean Geotechical Society Conference
• /
• 2010.03a
• /
• pp.801-810
• /
• 2010

Until now, design of Earth Retaining is practiced by 2nd dimensional analysis for convenience of analysis and time saving. However, the construction field is 3rd dimension, in this study, practised the 3rd dimensional analysis which can reflect the field condition more exactly the scope of earth retaining wall, and researched about the effective and economical way of design, compared and reviewed with the results, by practising both the 2nd and 3rd dimensional analysis. existing 2nd dimension. the depth of excavation, depth of embedded and soil condition. As result, under the whole conditions, more displacement came to appear to the value as result of 3rd dimensional analysis more than the result of 2nd dimensional analysis. Accordingly, the displacement by the 2nd dimension analysis is underestimated. Moreover, results of 2nd and 3rd dimensional analysis, there is no difference at displacement, when the depth of embedded is 0.5H, 1.0H and 1.5H, but Displacement of 1.5H is smaller than 0.5H, 1.0H. That is, the bigger the depth of embedded becomes, the displacement of Earth Retaining Wall appeared smaller. The displacement of earth retaining wall according to depth of excavation appeared bigger, when the depth of excavation is increased. In the meantime, when the soil condition is different, in the 2nd dimensional analysis, the displacement appeared biggest, in case of the clay layer, but in the 3rd dimensional analysis, in the beginning of excavating, the displacement of earth retaining wall appeared bigger in case of clay layer, but as excavating is in progress, the displacement of both compound soil layer and sand layer appeared big.

• Transactions on Electrical and Electronic Materials
• /
• v.3 no.3
• /
• pp.21-24
• /
• 2002

Two kinds of $Nd_{1+X}Ba_{2-X}Cu_3O_{7-{\delta}}$, the sintering samples and zone melting samples, were heat-treated under pure Ar at 950$^{circ}C$. The substitution of Nd ion for Ba ion in the $Nd_{1+X}Ba_{2-X}Cu_3O_{7-{\delta}}$ before and after the heat treatment was investigated by XRD. In order to confirm the effects of the heat treatment, the Tc and Jc of samples with/without the heat treatment under Ar were comparatively studied. $Nd_{1+X}Ba_{2-X}Cu_3O_{7-{\delta}}$ samples were oxygenated under pure oxygen at $300^{circ}C$. From the XRD pattern it was found that the sample with x<0.4 was transferred from tetragonal phase to orthorhombic phase after the oxygenation, while the sample with x>0.4 did not show the phase transition even after a long time oxygenation. Therefore, the low oxygen partial pressure (Ar+1 % O$_2$) was used for the ambient atmosphere of the zone-melting samples, which could reduce the melting temperature and depress the substitution of Nd for Ba. After the improvement in the zone-melting process, the Jc value was increased to 2 x $10^4$A/$cm^2$ (0 T, 78 K). The particle orientation and the structure of zone-melted NdBaCuO were studied by the XRD and SEM analysis.

• The korean journal of orthodontics
• /
• v.17 no.2
• /
• pp.321-333
• /
• 1987

The purpose of this study was to observe the changes of the lower 3rd molars following the extraction of the lower 2nd molars by Lateral Cephalograms and Orthopantomograms. The subjects consisted of twenty malocclusion, 7 males 13 females, were 19 year 5 month old at the removal of the lower 2nd molars, 19 year 1 month old at the end of the orthodontic supervision after the removal of the lower 2nd molars (mean age) The obtained results were as follows, 1 It is recommended to extract the lower 2nd molars when the lower 3rd molars are Nolla's Stage 4 or 5 2 With the pre-extraction variables obtained by factor analysis, it was possible to predict the long axis of the lower 3rd molars after 2nd molar extraction. 3 There were no impacted 3rd molars.