• The Korean Journal of Ceramics
• /
• 제1권2호
• /
• pp.101-105
• /
• 1995

Electrical discharge machinable $Si_3N_4$ was fabricated with the addtion of 20-60 vol% TiN by gas pressure sintering. Their sinterability, microstructure, mechanical and electrical properties were characterized as a function of the TiN content. The addition of TiN up to 20 vol% increased the flexural strength and fracture toughness as compared with those of the monolithic Si3N4. For the TiN content higher than 40 vol%, the electrical resistivity was lower than $1062\Omega$.cm. The $Si_3N_4$ with the addition of 40 vol% of TiN appears to have the optimum considerable sinterability, mechanical and electrical properties, and machinability. A microstructural analysis showed that the enhanced toughening was due to the crack deflection.

• 한국농공학회논문집
• /
• 제53권1호
• /
• pp.63-69
• /
• 2011

The green algae Scenedesmus acuminatus was cultured in different media: animal wastewater and an artificial culture medium in order to evaluate potential use for tertiary treatment. The experiments were conducted with air flowrate 1~2 L/min at $28{\sim}30^{\circ}C$. The nitrogen and phosphorus showed very similar removal efficiencies (68~77 % and 69~80 % for nitrogen and phosphorus respectively). The optimal fed period was estimated as three days in the semi-continuous experiment. The effects of $CO_2$ (4.5 %) injection on nutrient uptake from animal wastewater (biological treatment effluent) were compared to an air injection under the same conditions of light and photoperiod. The uptake rates of nutrient with air injection were observed 0.009 gN/gChl-a/day, 0.028 gN/gChl-a/day and T-P 0.003 gP/gChl-a/day for nitrate, total nitrogen and phosphorus respectively. The rates were enhanced by addition of $CO_2$ to 0.026 gN/gChl-a/day, 0.076 gN/gChl-a/day and T-P 0.018 gP/gChl-a/day. This study establishes that $CO_2$ addition during nutrient deprivation of microalgal cells may accelerate tertiary wastewater treatment.

• 한국세라믹학회지
• /
• 제27권8호
• /
• pp.956-956
• /
• 1990

석탄회의 탄소가 첨가된 질화반응시에 생성된 AIN, SiC 그리고 Si3N4 등의 생성물 분포를 반응온도, 시간 그리고 탄소의 첨가량에 따라 검토하였다. AIN의 조성은 시료입자가 작을수록 증가하였으며 반응온도 14500~1500℃와 약 2시간의 반응시간 그리고 약 30%의 탄소 첨가량 (시료무게 기준) 에서 최대값을 나타내었다. SiC와 Si3N4 조성변화는 서로 상반된 경향을 보였으며 반응온도가 낮고 반응시간이 작으며 그리고 탄소첨가량이 증가할 수록 SiC의 조성은 Si3N4 에 비하여 크게 나타났다.

• ETRI Journal
• /
• 제35권6호
• /
• pp.1156-1159
• /
• 2013

We investigate the characteristics of $Cu_2O$ thin films deposited through the addition of $N_2$ gas. The addition of $N_2$ gas has remarkable effects on the phase changes, resulting in improved electrical and optical properties. An intermediate phase ($6CuO{\cdot}Cu_2O$) appears at a $N_2$ flow rate of 1 sccm, and a $Cu_2O$ (200) phase is then preferentially grown at a higher feeding amount of $N_2$. The optical and electrical properties of $Cu_2O$ thin films are improved with a sufficient $N_2$ flow rate of more than 15 sccm, as confirmed through various analyses. Under this condition, a high bandgap energy of 2.58 eV and a conductivity of $1.5{\times}10^{-2}$ S/cm are obtained. These high-quality $Cu_2O$ thin films are expected to be applied to $Cu_2O$-based heterojunction solar cells and optical functional films.

• 한국수정란이식학회지
• /
• 제13권2호
• /
• pp.139-145
• /
• 1998

In the present study, effects of interleukin-2 (IL-2), a differentiator and proliferator of T-cells, on nuclear maturation and sperm penetration of bovine oocytes was examined in a serum-free or serum-containing medium. Basic medium was used TCM-199 supplemented with 2.2g / ι sodium bicarbonate, 100 i.u. /rnl penicillin. 100$\mu$g /ml streptomycin, 0.25$\mu$g/ml Fungizone, this medium treated with FCS and IL-2. In experiment 1, we examined the effect of the addition of 0, 1, 5, 10 or 15nM /ml IL-2 to tissue culture medium (TCM-199) on nuclear maturation of oocytes Development of oocytes to the Metaphase II (M II) stage (%) was significantly (P<0.05) higher at 1, 5,10 and 15 nM /ml IL-2(54.2, 73.5, 80.0 and 69.6%, respectively) than at 0 nM /ml IL-2(35.7%). In experiment 2, we examined the effect of the addition of l0nM /ml IL-2 or 5% FCS in oocyte maturation. Nuclear maturation rates were significantly(P<0.05) higher l0nM /ml IL-2(80%) than non-treatment(35.7%) and 5% FCS(63.6%) treatment. On the other hand, there were no significant difference in the proportion of oocytes developed to the 2-cell stage after addition of IL-2 and/or FCS. These results suggest that IL-2 supports nuclear maturation of bovine immature oocytes in vitro. Serum-free maturation system using IL-2 might be useful for evaluation of various factors on oocyte maturation.

• 한국재료학회지
• /
• 제9권5호
• /
• pp.503-508
• /
• 1999

We have investigated the physical and diffusion barrier property of Ti-Si-N film for Cu metallization. The ternary compound was deposited by using reactive rf magnetron sputtering of a TiSi$_2$target in an Ar/$N_2$gas mixture. Resistivities of the films were in range of 358$\mu$$\Omega$-cm, to 307941$\mu$$\Omega$-cm, and tended to increase with increasing the $N_2$/Ar flow rate ratio. The crystallization of the Ti-Si-N compound started to occur at 100$0^{\circ}C$ with the phases of TiN and Si$_3$N$_4$identified by using XRD(X-ray Diffractometer). The degree of the crystallization was influenced by the $N_2$/Ar flow ratio. The diffusion barrier property of Ti-Si-N film for Cu metallization was determined by AES, XRD and etch pit by secco etching, revealing the failure temperature of 90$0^{\circ}C$ in 43~45at% of nitrogen content. In addition, the very thin compound (10nm) with 43~45at% nitrogen content remained stable up to $700^{\circ}C$. Furthermore, thermal treatment in vacuum at $600^{\circ}C$ improved the barrier property of the Ti-Si-N film deposited at the $N_2$(Ar+$N_2$) ratio of 0.05. The addition of Ti interlayer between Ti-Si-N films caused the drastic decrease of the resistivity with slight degradation of diffusion barrier properties of the compound.

• 대한화학회지
• /
• 제38권12호
• /
• pp.908-914
• /
• 1994

5원자 고리형 ${\beta}$-keto ester와 phenylalkylamine의 탈수축합으로 얻은 enamine A의 oxalyl화 및 물이나 메탄올 부가에 의하여 octahydro-2,3-dioxo-cyclopenta[b]-pyrrole-3a-carboxylate의 6a-hydroxy- 및 6a-methoxy-유도체(1~6)를 합성하였다. 헤테로 고리의 형성은 불안정한 N-acyliminium(B)체를 경유하여 일어나며, 안정한 부가체 C (1∼6)는 endo-ene형 pyrrolinium B에 친핵체를 부가하여 얻을 수 있었다.

• Corrosion Science and Technology
• /
• 제13권2호
• /
• pp.70-80
• /
• 2014

Duplex stainless steels with nearly equal fraction of the ferrite(${\alpha}$) phase and austenite(${\gamma}$) phase have been increasingly used for various applications such as power plants, desalination facilities due to their high resistance to corrosion, good weldability, and excellent mechanical properties. Hyper duplex stainless steel (HDSS) is defined as the future duplex stainless steel with a pitting resistance equivalent (PRE=wt.%Cr+3.3(wt.%Mo+0.5wt.%W)+30wt.%N) of above 50. However, when HDSS is welded with gas tungsten arc (GTA), incorporation of nitrogen in the Ar shielding gas are very important because the volume fraction of ${\alpha}$-phase and ${\gamma}$-phase is changed and harmful secondary phases can be formed in the welded zone. In other words, the balance of corrosion resistance between two phases and reduction of $Cr_2N$ are the key points of this study. The primary results of this study are as follows. The addition of $N_2$ to the Ar shielding gas provides phase balance under weld-cooling conditions and increases the transformation temperature of the ${\alpha}$-phase to ${\gamma}$-phase, increasing the fraction of ${\gamma}$-phase as well as decreasing the precipitation of $Cr_2N$. In the anodic polarization test, the addition of nitrogen gas in the Ar shielding gas improved values of the electrochemical parameters, compared to the Pure Ar. Also, in the erosion-corrosion test, the HDSS welded with shielding gas containing $N_2$ decreased the weight loss, compared to HDSS welded with the Ar pure gas. This result showed the resistance of erosion-corrosion was increased due to increasing the fraction of ${\gamma}$-phase and the stability of passive film according to the addition $N_2$ gas to the Ar shielding gas. As a result, the addition of nitrogen gas to the shielding gas improved the resistance of erosion-corrosion.

• 한국세라믹학회지
• /
• 제27권8호
• /
• pp.965-970
• /
• 1990

A nitrogenation of coal ash in the presence of carbon was carried out to examine the effects of reaction temperature, reaction time and carbon composition on the formation of AlN, SiC and Si3N4. Decreasing the particle size increased the formation of AlN and its maximum composition in the product was obtaiend under 1450~150$0^{\circ}C$, 2 hours of reaction time and about 30% of carbon addition(on the basis of sample weight). Compositions of SiC and Si3N4 were distributed to the opposite so that SiC showed a higher composition compared with Si3N4 at a lower temperature, a shorter reaction time and a greater carbon addition.

• 대한수학회지
• /
• 제48권2호
• /
• pp.431-447
• /
• 2011

We investigate the asymptotic behavior of positive solutions to the elliptic equation (0.1) ${\Delta}u+|x|^{l_1}u^p+|x|^{l_2}u^q=0$ in $\mathbb{R}^n$. We obtain a conclusion that, for n $\geq$ 3, -2 < $l_2$ < $l_1$ $\leq$ 0 and q > p > 1, any positive radial solution to (0.1) has the following properties: $lim_{r{\rightarrow}{\infty}}r^{\frac{2+l_1}{p-1}}\;u$ and $lim_{r{\rightarrow}0}r^{\frac{2+l_2}{q-1}}\;u$ always exist if $\frac{n+1_1}{n-2}$ < p < q, $p\;{\neq}\;\frac{n+2+2l_1}{n-2}$, $q\;{\neq}\;\frac{n+2+2l_2}{n-2}$. In addition, we prove that the singular positive solution of (0.1) is unique under some conditions.