• The Korean Journal of Nuclear Medicine
• /
• v.38 no.6
• /
• pp.498-505
• /
• 2004

Purpose: We compared captopril renal scintigraphic criteria for the diagnosis of renovascular hypertension by unilateral renal artery stenosis. Materials and Methods: The study group consisted of 24 patients (m/f : 16/8, age: $39{\pm}18$ years) with unilateral renal artery stenosis who underwent renal artery revascularization and captopril renal scintigraphy with $^{99m}Tc$-diethylenetriaminepentaacetic acid between May 1995 and April 2004. The blood pressure response was classified as cure/improvement or failure. We evaluated captopril-induced changes in relative function (BCfun) and renogram grade (0 to 5: 0=normal, and 5=renal failure pattern without measurable uptake) (CBren) and the difference of renograms between the normal and stenotic kidney on captopril scan (CNren). Results: light of 24 patients were cured and 11 improved and 5 patients were classified as failed revascularization. Significant predictors of a cure or improvement of blood pressure were younger age, stenosis by fibromuscular dysplasia or arteritis, BCfun, CBren and CNren. Areas under the receiver operating characteristic curve of age, BCfun, CBren and CNren were not significantly different. Positive and negative predictive values of predictors were 100% and 42% (age ${\leq}38$): 92% and 50% (BCfun ${\geq}1%$): 92% and 75% (CBren ${\geq}1$), and 90% and 60% (CNren ${\geq}1$), respectively. Conclusion: Captopril induced changes in renal function and renogram can reliably predict hypertension response to revascularization. Renogram pattern on captopril scan can diagnose renovascular hypertension without baseline data in patients with unilateral renal artery stenosis.

• Economic and Environmental Geology
• /
• v.43 no.6
• /
• pp.589-601
• /
• 2010

Recently it has been frequently reported arsenic contamination of geologic origin in groundwater. The iron-impregnated ranular activated carbon (Fe-GAC) was developed for effective removal of arsenic from groundwater n the study. Fe-GACs were prepared by impregnating iron compounds into a supporting medium (GAC) with 0.05 M iron nitrate solution. The materials were used in arsenic adsorption isotherm tests to know the effect of iron impregnation time, batch kinetic tests to understand the influence of pH, and column tests to evaluate for the preliminary operation of water treatment system. The results showed that the minimum twelve hours of impregnation time were required for making the Fe-GAC with sufficient iron content for arsenic removal, confirmed by a high arsenic adsorption capacity evaluated in the isotherm tests. Most of the impregnated iron compounds were iron hydroxynitrate $Fe_4(OH)_{11}NO_3{\cdot}2H_2O$ but a mall quantity of hematite was also identified in X-ray diffraction(XRD) analysis. The batch isotherms of Fe-GAC for arsenic adsorption were well explained by Langmuir than Freundlich model and the iron contents of Fe-GAC have positive linear correlations on logarithmic plots with Freundlich distribution coefficients ($K_F$ and Langmuir maximum adsorption capacities ($Q_m$. The results of kinetic experiments suggested hat Fe-GAC had he excellent arsenic adsorption capacities regardless of all pH conditions except for pH 11 and could be used a promising adsorbents for groundwater arsenic removal considering the general groundwater pH range of 6-8. The pseudo-second order model, based on the assumption that the ate-limiting step might be chemisorption, provided the best correlation of the kinetic experimental data and explained the arsenic adsorption system f Fe-GAC. The column test was conducted to valuate the feasibility of Fe-GAC use and the operation parameters in arsenic groundwater treatment system. The parameters obtained from the column test were the retardation actor of 482.4 and the distribution coefficient of 581.1 L/mg which were similar values of 511.5-592.5 L/mg acquired from Freundlich batch isotherm model. The results of this study suggested that Fe-GAC could be used as promising adsorbent of arsenic removal in a small groundwater supply system with water treatment facility.

• The Korean Journal of Pesticide Science
• /
• v.5 no.2
• /
• pp.45-50
• /
• 2001

In recent, non virus-induced mosaic symptoms(NVMS) on potato leaves were observed in the seed potato fields, and its incidence rate was $5{\sim}20%$ nationwide. It made difficult to rogue out virus-infected plants, and caused much arguments between seed potato production farmers and seed potato inspectors. The objectives of these experiments were to find out the causes of NVMS, and also to induce mosaic symptom(phytotoxicity) on potato plants by treatment of several herbicides. No significant correlations were found between incidence rates of NVMS and values from soil analyses; soil pH, soil EC, organic matter content, and contents of inorganic constituents($P_2O_5,\;NO_3$, Ca, Mg, K) in the soil around the potato planted. The examinations by ELISA, virus indicator plants, and TEM showed that NVMS on potato leaves was not caused by the viruses infection. But, the use of herbicides could induced the NVMS on potato leaves. The incidence rates of potato treated with pendimethalin linuron of 400 mL/10 a, pendimethalin of 200 mL/10 a, pendimethalin.oxadiazon of 300 mL/10 a, and control were 61.1%, 47.2%, 19.4%, and 1.4%, respectively. Based on these results, we confirmed that the treatment of pendimethalin alone and in mixture with other herbicides were the reason of NVMS on potato leaves. The yields among test plots were similar except dicamba treated plot, which decreased by about 23% compared to control plot. When their progenies harvested in 1999 were planted in the following season, no symptoms of mosaic were observed.

• Journal of Intelligence and Information Systems
• /
• v.18 no.2
• /
• pp.177-192
• /
• 2012

This is a study of match-making systems that considers the mutual satisfaction of matching partners. Recently, recommendation systems have been applied to people recommendation, such as recommending new friends, employees, or dating partners. One of the prominent domain areas is match-making systems that recommend suitable dating partners to customers. A match-making system, however, is different from a product recommender system. First, a match-making system needs to satisfy the recommended partners as well as the customer, whereas a product recommender system only needs to satisfy the customer. Second, match-making systems need to include as many participants in a matching pool as possible for their recommendation results, even with unpopular customers. In other words, recommendations should not be focused only on a limited number of popular people; unpopular people should also be listed on someone else's matching results. In product recommender systems, it is acceptable to recommend the same popular items to many customers, since these items can easily be additionally supplied. However, in match-making systems, there are only a few popular people, and they may become overburdened with too many recommendations. Also, a successful match could cause a customer to drop out of the matching pool. Thus, match-making systems should provide recommendation services equally to all customers without favoring popular customers. The suggested match-making system, called Mutually Beneficial Matching (MBM), considers the reciprocal satisfaction of both the customer and the matched partner and also considers the number of customers who are excluded in the matching. A brief outline of the MBM method is as follows: First, it collects a customer's profile information, his/her preferable dating partner's profile information and the weights that he/she considers important when selecting dating partners. Then, it calculates the preference score of a customer to certain potential dating partners on the basis of the difference between them. The preference score of a certain partner to a customer is also calculated in this way. After that, the mutual preference score is produced by the two preference values calculated in the previous step using the proposed formula in this study. The proposed formula reflects the symmetry of preferences as well as their quantities. Finally, the MBM method recommends the top N partners having high mutual preference scores to a customer. The prototype of the suggested MBM system is implemented by JAVA and applied to an artificial dataset that is based on real survey results from major match-making companies in Korea. The results of the MBM method are compared with those of the other two conventional methods: Preference-Based Matching (PBM), which only considers a customer's preferences, and Arithmetic Mean-Based Matching (AMM), which considers the preferences of both the customer and the partner (although it does not reflect their symmetry in the matching results). We perform the comparisons in terms of criteria such as average preference of the matching partners, average symmetry, and the number of people who are excluded from the matching results by changing the number of recommendations to 5, 10, 15, 20, and 25. The results show that in many cases, the suggested MBM method produces average preferences and symmetries that are significantly higher than those of the PBM and AMM methods. Moreover, in every case, MBM produces a smaller pool of excluded people than those of the PBM method.

• Korean Journal of Ecology and Environment
• /
• v.48 no.3
• /
• pp.176-187
• /
• 2015

In this study, we hypothesized that the size of wintering crane population would change due to the climate factors. We assumed that wintering population size would differ by climate values in January, which is the coldest period in year. Especially, White-naped cranes were able to choose wintering site between Cheorwon and other alternative place where snow coverage had low influence, differing from Red crowned cranes. For this reason, we predicted the population size of White-naped cranes would fluctuate according to the extent of snow coverage in Cheorwon. Therefore we used snow coverage data based on MODIS and climate data from KMA (Korea Meteorological Administration) that are generally used. We analyzed the crane's population size in Cheorwon in January from 2002 to 2014. The temperature in the Cheorwon increased from 2002 to wintering period in 2007~ 2008 and went down, showing the lowest temperature in 2011~ 2012. With this phenomenon, warmth index showed the similar pattern with temperature. Amount of newly accumulated snow (the amount of snow that fallen from 0:01 am to 11:29 pm in a day) was low after 2002, but rapidly increased in 2010~ 2011 and 2011~ 2012. The area of snow coverage rapidly declined from 2002 to 2005~ 2006 but suddenly expanded in wintering period in 2009~ 2010 and 2010~ 2011. Wintering population size of the White-naped cranes decreased as snow coverage area increased in January and the highest correlation was found between them, compared to the other climatic factors. However, the number of individuals of Red crowned cranes had little relationship with general climate factors including snow cover range. Therefore it seems that population size of the Red crowned crane varied by factors related with habitat selection such as secure roosting site and area of foraging place, not by climatic factors. In multiple regression analysis, wintering population of White-naped cranes showed significant relationship with logarithmic value of snow cover range and its period. Therefore, it suggests that the population size of the White-naped crane was affected by snow cover range n wintering period and this was because it was hard for them to find out rice grains which are their main food items, buried in snow cover. The population size variation in White-naped cranes was caused by some individuals which left Cheorwon for Izumi where snow cover had little influence on them. The wintering population in Izumi and Cheorwon had negative correlation, implying they were mutually related.

• Journal of The Korean Society of Grassland and Forage Science
• /
• v.36 no.2
• /
• pp.150-158
• /
• 2016

This study was conducted to evaluate growth characteristics, yield and feed value of newly developed domestic teosinte (Geukdong 6) compared to widely cultivated silage corn hybrid (31N27) and sorghum ${\times}$ sudangrass hybrid (P877F). Geukdong 6, a new single cross (Teosinte ${\times}$ Suwon 19) variety, is a teosinte (Zea may L. ssp. maxicana) developed by the Geukdong 6 of agricultural company corporation (GACC) in An-dong province. This field experiment was designed in a randomized block design with three replications and consisted of silage corn (T1), sorghum x sudangrass hybrid (T2) and Geukdong 6 (T3). Leaf length, number of leaves, number of tillers and fresh yield of T3 were higher than that of T1 and T2 (p<0.05). Dry matter yield of T3 was lower than that of T1 (p<0.05). In particular, T3 ($0.1kg/cm^2$) showed to be very tender compared to other T1 ($0.5kg/cm^2$) and T2 ($0.5kg/cm^2$), (p<0.05). The crude protein content of T3 as 8.25% was higher than that of T2 (5.90%), (p<0.05). However, there was no significant differences between T1 (8.14%). The brix degree of T2 was higher than that of T1 and T3 (p<0.05). T3 showed higher content of total minerals compared to T1 and T2 (p<0.05). The relative palatability of T3 was higher than T1 and T2 (p<0.05), when fed to deer as soiling crop. However, it showed a lower than T1 in Korean native cattle and korean native goats. The relative palatability of the silage shown in order of T1> T3> T2 in korean native cattle, spotted deer, and korean native goats. As mentioned above the results, Geukdong 6 (T3) could be recommended as using of soiling and lab silage, when high fresh yield, tender stem, number of many leaf, content of high crude protein, and palatability higher than sorghum ${\times}$ sudangrass hybrid were considered.

• Journal of Food Hygiene and Safety
• /
• v.30 no.3
• /
• pp.272-280
• /
• 2015

A simultaneous official method was developed for the determination of phorate and its metabolites (phorate sulfoxide, phorate sulfone, phorate oxon, phorate oxon sulfoxide, phorate oxon sulfone) in livestock samples. The analytes were quantified and confirmed via liquid chromatograph-tandem mass spectrometer (LC-MS/MS) in positive ion mode using multiple reaction monitoring (MRM). Phorate and its metabolites were extracted from beef and milk samples with acidified acetonitrile (containing 1% acetic acid) and partitioned with anhydrous magnesium sulfate. Then, the extract was purified through primary secondary amine (PSA) and C18 dispersive sorbent. Matrix matched calibration curves were linear over the calibration ranges (0.005-0.5 mg/L) for all the analytes into blank extract with $r^2$ > 0.996. For validation purposes, recovery studies were carried out at three different concentration levels (beef 0.004, 0.04 and 0.2 mg/kg; milk 0.008, 0.04 and 0.2 mg/kg, n = 5). The recoveries were within 79.2-113.9% with relative standard deviations (RSDs) less than 19.2% for all analytes. All values were consistent with the criteria ranges requested in the Codex guidelines. The limit of quantification was quite lower than the maximum residue limit (MRL) set by the Ministry of Food and Drug Safety (0.05 mg/kg). The proposed analytical method was accurate, effective and sensitive for phorate and its metabolites determination and it will be used to as an official analytical method in Korea.

• Journal of Korean Society of Forest Science
• /
• v.78 no.4
• /
• pp.360-371
• /
• 1989

This study was performed to investigate effects of air pollution on the Pinus thunbergii forests in Onsan industrial districts, and environmental factors, contents of soluble sulfur in needles, and composition of sorest vegetation were examined. The results obtained in this study were summarized as follows ; 1. The pH of soils, organic matter and total N were low near the source of air pollutants, and sulfur contents in the soils was high in general. Especially there was significant correlation between the sulfur contents in the soil and pH at 1% level. 2. The contents of soluble sulfur in needles ranged from 0.13% to 0.25% and were generally high, and plot 2 and 3 were the highest of all. 3. In the number of species, 7 species appeared in plot 3 and 20 species in plot 7, and they were low near the source of air pollutants. Total number of individuls, species diversity and evenness increased with in creasing distance from the source of air pollutants. 4. There were significant correlations between the contents of soluble sulfur in needles and the number of species and species diversity at 5%, 1% level, respectively. 5. Importance value of each species was low near the source of air pollutants but Quercus species showed high values in all plots. 6. On these studied plots, Pinus thunbergii, Quercus serrata and smilax china were tolerant, and Rhododendron mucronulatum, Rhododendron yedoense var. poukhanense, Platycarya strobilacea and Lespedeza maritima were sensitive to air pollution.

• Korean Journal of Dental Materials
• /
• v.45 no.4
• /
• pp.257-274
• /
• 2018

The purpose of this study was to evaluate the effect of acid-treatment conditions on the surface properties of the RBM (Resorbable Blast Media) treated titanium. Disk typed cp-titanium specimens were prepared and RBM treatments was performed with calcium phosphate ceramic powder. Acid solution was mixed using HCl, $H_2SO_4$ and deionized water with 4 different volume fraction. The RBM treated titanium was acid treated with different acid solutions at 3 different temperatures and for 3 different periods. After acid-treatments, samples were cleaned with 1 % Solujet solution for 30 min and deionized water for 30 min using ultrasonic cleanser, then dried in the electrical oven ($37^{\circ}C$). Weight of samples before and after acid-treatment were measured using electric balance. Surface roughness was estimated using a confocal laser scanning microscopy, crystal phase in the surface of sample was analyzed using X-ray diffractometer. Surface morphology and components were evaluated using Scanning Electron Microscope (SEM) with Energy Dispersive X-ray spectroscopy (EDX) and X-ray Photoemission Spectroscopy (XPS). Values of the weight changes and surface roughness were statistically analyzed using Tukey-multiple comparison test (p=0.05). Weight change after acid treatments were significantly increased with increasing the concentration of $H_2SO_4$ and temperature of acid-solution. Acid-treatment conditions (concentration of $H_2SO_4$, temperature and time) did not produce consistent effects on the surface roughness, it showed the scattered results. From XRD analysis, formation of titanium hydrides in the titanium surface were observed in all specimens treated with acid-solutions. From XPS analysis, thin titanium oxide layer in the acid-treated specimens could be evaluated. Acid solution with $90^{\circ}C$ showed the strong effect on the titanium surface, it should be treated with caution to avoid the over-etching process.

• Korean Journal of Dental Materials
• /
• v.44 no.2
• /
• pp.151-161
• /
• 2017

The purpose of this study was to examine the effect of shade and thickness of resin-nanoceramic CAD-CAM block (RNB) on the microhardness of dual-cured resin cement, as well as to measure the number of photons transmitted through RNBs of different thicknesses and colors. One dual-cured resin cement was used to prepare resin cement specimens. Resin cement specimens were light-cured for 40 seconds through 3 shades (A1, A2, A3 in HT (high translucency) and LT (low translucency) respectively) and four thicknesses (1, 2, 3, 4 mm) of RNB specimens. Vickers microhardness measurements of resin cement specimens were performed using a Vickers hardness tester. The light transmission of RNB specimens was measured using a spectrometer (SpectroPro-500, Acton Research, Acton, MA, U.S.A.), and the translucency parameter was calculated using the CIEL*a*b* system. Data were statistically analyzed by ANOVA and Tukey's test. There was a significant decrease of microhardness of resin cement specimen with an overlay of 4 mm of RNB thickness and A3 shade in comparison to A1 and 1 mm, respectively (p<0.05). The translucency parameter values and light transmission of RNBs tested differed significantly, according to the thicknesses of the specimen (p<0.05). Light transmission is decreased with increase in the thicknesses of RNBs. Shade A1 transmitted more light than darker blocks. A decrease in microhardness of resin cement specimens was observed with increasing thickness and shade (A1 to A3) of RNBs.