• Journal of the Korean Ceramic Society
• /
• v.31 no.2
• /
• pp.177-184
• /
• 1994

AlN-BN ceramics with BN contents in the range of 10 to 40 wt% were prepared by hot pressing using no additive, or 3 wt%, Y2O3 or CaO, which are common densification aids for AlN. And their machinability, bend strength, and microstructures were investigated. Both the main and radial cutting forces decreased with increasing BN content in all three kinds of samples. For the BN contents of 30 wt% or above, the cutting forces were lower than that of a mild steel tested at a same condition. Especially in the case of main forces, the values were less than a quarter of that of a mild steel, indicating excellent machinability. Bend strength (when the tensile surfaces of specimens were perpendicular to the hot pressing direction) also decreased with BN content mainly due to the much lower Young's modulus of BN compared to AlN. With the composition of 30 wt% BN at which the AlN-BN ceramics started to show better machinability than a mild steel, the bend strength was 150 to 160 MPa, which is greater than that of machinable glass-ceramics of a mica system. With tensile surfaces parallel to the hot pressing direction, however, the bend strength obtained for the samples processed with the sintering acids showed low values (about 40 MPa), since most BN particles had such orientation that their cleavage planes (i.e., basal planes) were perpendicular to the pressing direction.

• Journal of Plant Biology
• /
• v.25 no.4
• /
• pp.153-160
• /
• 1982

The kinetics of $^{14}C$ fixation have been investigated in Anabaena flos-aquae growing on ${NH}_4+$,$NO_3-$ and $NO_2-N$ in batch cultures. Growth rate was highest with ${NH}_4+$, followed by $NO_2-$ and finally $NO_2$. The compensation intensity($I_0$) and the half-saturation irradiance($K_1$) with $K_1$ were higher than with other N sources, but the maximum C fixation rate($P_{max}$) was lower. The ($P_{max}$)/$K_1$ ratio, which is analogous to quantum efficiency at low irradiance ranges, was also lower with $N_2$. All these parameters except $K_1$ decrease with culture age, or decreasing growth rate. Since $^{14}C$ uptake measures net photosynthesis, the higher values of $I_0$ and $K_1$, and the low values of $P_{max}$/$K_1$ ratio with $N_2$ appear to be related to the high energy demand of $N_2$fixation. They may also be related to the lox maximum growth rate with $NO_2-N$.

• Journal of Smart Tourism
• /
• v.2 no.4
• /
• pp.25-34
• /
• 2022

Digital transformation plays a critical role in making hospitality and tourism organizations create new business processes and customer experiences. The hospitality and tourism industry thrives on creating unique experiences by offering exceptional and innovative customer services through innovative digital technologies. Thus, this study provides an overview of the current use of these technologies in the hospitality industry and their potential advantages and opportunities. In particular, the metaverse and immersive virtual reality (VR) technology are gaining popularity in the hospitality industry, offering new opportunities for innovation and driving core values. This study discusses the current use of VR and metaverse and potential advantages and opportunities for researchers and practitioners in the hospitality and tourism context. Thus, we provide suggestions and implications for hospitality and tourism industry stakeholders to increase core values and business performance and create sustainable competitive advantages over other market players through VR and metaverse.

• Advances in concrete construction
• /
• v.16 no.6
• /
• pp.317-325
• /
• 2023

Strength prediction and correlation of concrete is done using experimental and analytical methods. Main objective is to correlate the experimental and simulated values of compressive strength of concrete mix using Fly Ash (FA) and Silica Fume (SF) by partial replacement of cement in concrete. Mix proportion was determined using IS method for M40grade concrete. Hundred and forty-seven cubes were cast and tested using Universal Testing Machine (UTM). Genetic Algorithm (GA) model was developed using C++ program to simulate the compressive strength of concrete for various proportions of FA and SF replacements individually at 3% increments. Experiments reveal that 12 percent silica fume replacement produced maximum compressive strength of 35.5 N/mm², 44.5 N/mm² and 54.8 N/mm² moreover 9 percent fly ash replacement produced a maximum strength of 31.9 N/mm², 37.6 N/mm² and 51.8 N/mm² during individual material replacement of concrete mix. Correlation coefficient for each curing period of fly ash and silica fume replaced mix were acquired using trend lines. The correlation coefficient is found to be approximately 0.9 in FA and SF replaced mix irrespective of the mix proportion and age of concrete. A higher and positive correlation was found between the experimental and simulated values irrespective of the curing period in all the replacements.

• Korean Journal of Ecology and Environment
• /
• v.50 no.4
• /
• pp.459-469
• /
• 2017

Nitrogen (N) loading from domestic, agricultural and industrial sources can lead to excessive growth of macrophytes or phytoplankton in aquatic environment. Many studies have used stable isotope ratios to identify anthropogenic nitrogen in aquatic systems as a useful method for studying nitrogen cycle. In this study to evaluate the precision and accuracy of denitrification bacteria method (Pseudomonas chlororaphis ssp. Aureofaciens ($ATCC^{(R)}$ 13985)), three reference (IAEA-NO-3 (Potassium nitrate $KNO_3$), USGS34 (Potassium nitrate $KNO_3$), USGS35 (Sodium nitrate $KNO_3$)) were analyzed 5 times repeatedly. Measured the ${\delta}^{15}N-NO_3$ and ${\delta}^{18}O-NO_3$ values of IAEA-NO-3, USGS 34 and USGS35 were ${\delta}^{15}N:4.7{\pm}0.1$‰ ${\delta}^{18}O:25.6{\pm}0.5$‰, ${\delta}^{15}N:-1.8{\pm}0.1$‰ ${\delta}^{18}O:-27.8{\pm}0.4$‰, and ${\delta}^{15}N:2.7{\pm}0.2$‰ ${\delta}^{18}O:57.5{\pm}0.7$‰, respectively, which are within recommended values of analytical uncertainties. Also, we investigated isotope values of potential nitrogen source (soil, synthetic fertilizer and organic-animal manures) and temporal patterns of ${\delta}^{15}N-NO_3$ and ${\delta}^{18}O-NO_3$ values in river samples during from May to December. ${\delta}^{15}N-NO_3$ and ${\delta}^{18}O-NO_3$ values are enriched in December suggesting that organic-animal manures should be one of the main N sources in those areas. The current study clarifies the reliability of denitrification bacteria method and the usefulness of stable isotopic techniques to trace the anthropogenic nitrogen source in freshwater ecosystem.

• Journal of Korean Society of Environmental Engineers
• /
• v.30 no.5
• /
• pp.544-551
• /
• 2008

QUAL2K enhanced QUAL2E and applied in real fields efficiently incorporates denitrification process, sediment-water interaction process, bottom algae and detritus. Also, the CBOD of QUAL2K is divided into two real parts, one is slow CBOD(sCBOD) and another is fast CBOD(fCBOD). The simulation results of QUAL2E and QUAL2K models in Anyang Stream were compared and analyzed in water quality constituents of DO, BOD, Org-N, NH$_3$-N, NO$_3$-N, Org-P, Dis-P and Chl-a respectively. The similar results were shown in Org-N, NH$_3$-N, Org-P and Chl-a both QUAL2K and QUAL2E models. But the different results were revealed in DO, BOD, Dis-P and NO$_3$-N by the influence of new incorporating processes. DO was shown relatively low values in the effect of bottom algae. BOD which is influenced by particulate organic matter was revealed high values. NO$_3$-N was closed to the real values by the two processes of denitrification and sediment-water interaction. To evaluate the running results of QUAL2K and QUAL2E models, a simple statistical analysis was conducted. According to the statistical analysis, QUAL2K represented less relative error and coefficient of variation than QUAL2E in almost all of constituents. It was found that QUAL2K, which simulates the water quality more realistically, can be applied to control and manage the water problems of river or river-run reservoir effectively.

• Fashion & Textile Research Journal
• /
• v.5 no.3
• /
• pp.267-272
• /
• 2003

Tactel(Nylon66) union fabrics were woven with the specification of 70d/34f nylon as warp for sport wear jacket. Weft yarn has three types; 100% cotton yarn, nylon core-spun yarn and nylon-polyurethane covering yarn as weft. Fabric structers were plain, twill and satin weave structure with the air jet loom. The mechanical properties of 8 fabrics were measured with KES-F and primary Hand Values and Total Hand Values were calculated. The results of the study were as follows: 1) There was little difference among LTs of N/CM fabric groups. RT of the fabrics with CM100's was bigger than that of fabrics with CM80's, resulting that the fabrics with CM100's have better formability. In terms of weaving structure, twill fabrics have shape deformation. 2) In comparison of RTs with weft yarn type, RT of N-PU covering yarn was the highest, followed by Nylon core-spun yarn and cotton yarn. Thus, the fabric with N-PU covering yarn has better stability of shape deformation. 3) Stretch yarn could express an excellent silhouette formation and twill and satin structures were better structure to make curvature on human form. 4) 2HG/G value of nylon core-spun fabrics was larger than that of N/C fabrics, but the silhouette formation of N/C fabrics was excellent. 5) The RC of N/PU was the highest, followed by N/P, and N/CM. 6) Koski of N/PU fabrics was the highest, Numeri of N/PU and N/Co-I were relatively higher than the others. THVs of N/CM-IV and N/CO-II were lower than the others, resulting that, twill structure was better than plain structure for a sport wear uses.

• Archives of Plastic Surgery
• /
• v.47 no.1
• /
• pp.9-14
• /
• 2020

Background Eyelids vary in morphology and structure depending on age, sex, and race. Usually, one-dimensional measurements are used to evaluate blepharoplasty outcomes. However, in recent years, three- or four- directional enlargements of the eyelid have been used for blepharoplasty in Asian patients, and the outcomes of techniques such as lateral canthoplasty or canthotomy and medial epicanthoplasty with increased scleral area cannot be analyzed using marginal reflex distance 1 or the area of corneal exposure. Therefore, we describe the use of a measurement method based on the eyeball exposure area (EEA). Methods To obtain normal EEA values by age and sex, 320 individuals were recruited. The participants were divided into eight age groups (n=40 in each group: female subjects, n=20; male subjects, n=20): 10-19, 20-29, 30-39, 40-49, 50-59, 60-69, 70-79, and 80-89 years. The EEA value was obtained by dividing the exposed area by the total eyeball area. The normal EEA values and differences in EEA according to age and sex were calculated. Results The mean EEA values for male and female subjects were 66.86% ±9.20% and 71.48%±10.48%, respectively. In each age group, the EEA values of females were higher than those of males. EEA decreased significantly with age in both male and female subjects (P<0.05). Conclusions We determined normal EEA values according to age and sex. EEA can be used as an indicator of the outcome of blepharoplasty.

• Journal of applied mathematics & informatics
• /
• v.38 no.1_2
• /
• pp.1-12
• /
• 2020

In this paper, we solve the difference equation $x_{n+1}={\frac{x_nx_{n-2}}{ax_n-bx_{n-2}}}$, n = 0, 1, …, where a and b are positive real numbers and the initial values x_-2, x_-1 and x₀ are real numbers. We also find invariant sets and discuss the global behavior of the solutions of aforementioned equation.

• YAKHAK HOEJI
• /
• v.23 no.3_4
• /
• pp.129-132
• /
• 1979

The ORD and CD for hyoscine-N-butylbromide present curves of negative Cotton effect in 190-250nm region. The values of .alpha./sub 232/ .alpha./sub 208/, vertical bar .alpha./sub 232/ vertical bar + vertical bar .alpha./sub 208/ and .theta./sub 221.5/ have linearities in the range of lower concentration (hyoscine-N-butylbromide 0.01-0.1w/v%). It is possible to determine the optical purity of hyoseine-N-butylbromide by using these linearities. This experiment is extremely simple and less time-consuming than other methods for estimating optical purity.