• Journal of the Korea Organic Resources Recycling Association
• /
• v.22 no.3
• /
• pp.60-67
• /
• 2014

Exhaust system used in toilet and cooking place of high riser public house is roof fan of two basic types : natural roof ventilator and natural/forced roof ventilator. Natural/forced roof ventilator has a motor in the rotary shaft. There are many high riser public house in Korea. These buildings were not viewed as being major contributors to exhaust pollutants producted in indoor. It was because many engineers thought that exhaust in high riser building depend on stack effect. This study investigates on stack pressure determined by exterior pressure and the difference pressure control in exhaust stack used in high riser public house. This paper focuses mainly on the effect of the time interval for power supply of motor installed in roof fan with function of natural wind velocity and of exhaust air volume of toilet. It is observed there are higher exhaust efficiency than the existing natural roof ventilator.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2008.11a
• /
• pp.7-8
• /
• 2008

The memory characteristics of charge trap flash (CTF) with $HfO_2$ charge trap layer were investigated. Especially, we focused on the effects of tunnel barrier engineering consisted of $SiO_2/Si_3N_4/SiO_2$ (ONO) stack or $Si_3N_4/SiO_2/Si_3N_4$ (NON) stack. The programming and erasing characteristics were significantly enhanced by using ONO or NON tunnel barrier. These improvement are due to the increase of tunneling current by using engineered tunnel barrier. As a result, the engineered tunnel barrier is a promising technique for non-volatile flash memory applications.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2008.06a
• /
• pp.168-168
• /
• 2008

Dimension of a transistor has rapidly shrunk to increase the speed of device and to reduce the power consumption. However, it is accompanied with several problems like direct tunneling through the gate dioxide layer and low conductivity characteristic of poly-Si gate in nano-region. To cover these faults, study of new materials is urgently needed. Recently, high dielectric materials like $Al_2O_3$, $ZrO_2$, and $HfO_2$ are being studied for equivalent oxide thickness (EOT). However, poly-Si gate is not compatible with high-k materials for gate-insulator. Poly Si gate with high-k material has some problems such as gate depletion and dopant penetration problems. Therefore, new gate structure or materials that are compatible with high-k materials are also needed. TiN for metal/high-k gate stack is conductive enough to allow a good electrical connection and compatible with high-k materials. According to this trend, the study on dry etching of TiN for metal/high-k gate stack is needed. In this study, the investigations of the TiN etching characteristics were carried out using the inductively coupled $BCl_3$-based plasma system and adding $Cl_2$ gas. Dry etching of the TiN was studied by varying the etching parameters including $BCl_3$/Ar gas mixing ratio, RF power, DC-bias voltage to substrate, and $Cl_2$ gas addition. The plasmas were characterized by optical emission spectroscopy analysis. Scanning electron microscopy was used to investigate the etching profile.

• Proceedings of the Korean Vacuum Society Conference
• /
• 2011.02a
• /
• pp.168-168
• /
• 2011

정보화 사회가 도래함으로 개인별 정보 이용량이 급격히 증가하였고 스마트폰과 같은 모바일 기기의 개발로 정보 이용량이 최고치를 갱신 중이다. 이러한 흐름 속에 사람들은 빠른 처리 속도와 고도의 저장 능력을 요구하게 되고 이에 따라 새로운 Random Access Memory에 대한 연구가 활발히 진행되고 있다. 현재 Dynamic Random Access Memory (DRAM)가 눈부신 발전과 성과를 이룩하고 있지만 전원 공급이 중단 될 경우 저장된 내용들이 지워진다는 단점을 가지고 있다. DRAM의 장점에 이러한 단점을 보완할 수 있는 차세대 반도체 소자로 주목 받고 있는 것이 Magnetic Random Access Memory (MRAM)이다. DRAM에서 Capacitor와 유사한 기능을 하는 MTJ stack은 tunneling magnetoresistance (TMR) 현상을 나타내는 자기저항 박막을 이용하여 MRAM 소자에 집적된다. 본 연구에서는 MRAM의 자성 재료로 구성된 MTJ stack을 효과적으로 식각하고 우수한 식각 profile을 얻는 동시에 재증착의 문제를 해결하는데 목적을 둔다. 본 IrMn 자성 박막의 식각 연구는 유도결합 플라즈마 반응성 이온 식각 (Inductively Coupled Plasma Reactive Ion Etching: ICPRIE)법을 이용하여 진행되었다. 특히 본 연구에서는 종래의 $Cl_2$, $BCl_3$ 그리고 HBr과 같은 부식성 가스가 아닌 부식성이 없는 $CH_4$가스를 선택하여 그 농도를 변화시키면서 식각하였고 더 나아가 $O_2$를 첨가하면서 그 효과를 극대화하려고 시도하였다. IrMn 자성 박막의 식각 속도, TiN 하드 마스크에 대한 식각 선택도 그리고 profile 등이 조사되었고 최종적으로 X-ray photoelectron spectroscopy (XPS)를 이용하여 식각 메카니즘을 이해하려고 하였다.

• Journal of Drive and Control
• /
• v.9 no.4
• /
• pp.14-18
• /
• 2012

Two kinds of piezoelectric actuator are applied to the valve for controlling the direction, the flow and the pressure of the fluid. One is a stack type piezoelectric actuator which has very fast response characteristics but very tiny displacement. The other is a bender type piezoelectric actuator which has also fast response characteristics but lower than the stack type one, and has longer displacement than the stack type one. So, the bender type piezoelectric actuator has advantage to apply to the valve for controlling a large amount of flow and fast on-off operating. In this study, the bender type piezoelectric pneumatic valve for color sorter is designed and fabricated. The new type high speed piezo valve with the both side supporting mechanism for high operating frequency and high reliability is discussed for separating the foreign body from the grains. Finally, the performance characteristics of a fabricated valve are analyzed and the frequency characteristics are also discussed for substituting the conventional type solenoid actuator.

• Proceedings of the KIEE Conference
• /
• 1988.11a
• /
• pp.21-23
• /
• 1988

Microstepping drive of 3 phase VR step motor with 2 phase exciting scheme is proposed. Considering the presence of harmonic components of inductance, the current reference is calculated. The experimental results show high accuracy of divided step position and resonance or instability in operating range.

• Current Photovoltaic Research
• /
• v.5 no.2
• /
• pp.63-67
• /
• 2017

Aluminum oxide ($Al_2O_3$) film deposited by atomic layer deposition (ALD) is known to supply excellent surface passivation properties on crystalline Si surface. The quality of passivation layer is important for high-efficiency silicon solar cell. double-layer structures have many advantages over single-layer materials. $Al_2O_3/SiN_X$ passivation stacks have been widely adopted for high- efficiency silicon solar cells. The first layer, $Al_2O_3$, passivates the surface, while $SiN_X$ acts as a hydrogen source that saturates silicon dangling bonds during annealing treatment. We explored the properties on passivation film of $Al_2O_3/SiN_X$ stack layer with changing the conditions. For the post annealing temperature, it was found that $500^{\circ}C$ is the most suitable temperature to improvement surface passivation.

• Transactions of the Korean hydrogen and new energy society
• /
• v.35 no.2
• /
• pp.162-167
• /
• 2024

Fossil fuels have been main energy source to people. However, enormous amount of CO₂ was emitted over the world , resulting in global climate crisis today. Recently, solid oxide electrolyzer cell (SOEC) is getting attention as an effective way for producing H₂, a clean energy resource for the future. Also, SOEC could be applicable to reverse water-gas shift reaction process due to its high-temperature operating condition. Here, SOEC system was utilized for both H₂ production and CO₂ reduction process, allowing product gas composition change by controlling operating conditions.

• Proceedings of the Korean Information Science Society Conference
• /
• 2012.06a
• /
• pp.382-384
• /
• 2012

클라우드 컴퓨팅 기술의 발전과 함께 많은 기업들이 관련 기술 연구를 통해 여러 플랫폼들을 제안하고 있다. 이러한 상황은 클라우드 컴퓨팅 플랫폼 발전에 도움이 되지만, 통합되지 않은 다수의 플랫폼으로 인한 문제점도 존재한다. 왜냐하면 클라우드 컴퓨팅 환경에 대해 처음 접하는 사용자의 경우, 플랫폼 선택시 합리적인 선택을 하기 어렵기 때문이다. 따라서 본 논문에서는 가장 많은 업체들이 제공하고 있는 오픈소스 기반의 플랫폼인 OpenStack, Eucalyptus, CloudStack, OpenNebula를 비교 및 분석한다. 분석 결과에서 알 수 있듯이, 각 플랫폼은 지원 가상화 기술, 스케줄링 기법, 배치 기법, 호환성 등 여러 가지 특성들 차이로 인한 장단점이 존재한다. 분석 결과를 바탕으로, 사용자들은 플랫폼들의 특성을 파악해 상황에 맞는 플랫폼을 합리적으로 선택할 수 있다.

• Bulletin of the Korean Chemical Society
• /
• v.24 no.9
• /
• pp.1281-1283
• /
• 2003

Proteins in highly oriented lipid bilayer samples are useful to study membrane protein structure determination. Planar lipid bilayers aligned and supported on glass slide were prepared. These stack of glass slide with planar lipid bilayers are not well fit for commercial solid-state NMR probe with round coil. Therefore, homebuilt solid-state NMR probe was built and used for a stack of thin glass plates and RF coil is wrapping directly around the flat square sample. The overall filling factor of the coil is much better and the large surface area enhances the extent to orientation by providing uniform environments for the phospholipids and the high ratio of circumference to area reduces edge effects. $^1H\;and\;^{15}N$ double resonance probe for 400 MHz NMR (9.4T) with a flat coil (coil size: 11 mm ${\times}$ 20 mm ${\times}$ 4 mm) is constructed and tested.