• Asian-Australasian Journal of Animal Sciences
• /
• v.24 no.10
• /
• pp.1393-1398
• /
• 2011

Four 4-month old Charolais${\times}$Dorset male sheep (initial liveweight $25.0{\pm}1.1\;kg$), fitted with rumen and abomasal fistulas and nourished by total intragastric infusions, were used to study the relationships between methionine (Met) supply, nitrogen (N) retention and plasma insulin-like growth factor-I (IGF-I). Four graded levels of Met, i.e. 0 g/16 g N, 1.76 g/16 g N, 3.52 g/16 g N and 7.04 g/16 g N, were infused into abomasums as experimental treatments. The sheep and treatments were allocated in a $4{\times}3$ incomplete Latin square design (Yudon square design). The experiment lasted 3 periods and each period was 10 days. Quadratic correlations were found between Met level (x, g/16 g N) and N retention (y, g/d): y = $-0.03x^2$+0.41x+2.62, $r^2$ = 0.66, n = 12, p = 0.008, and between methionine level (x, g/16 g N) and plasma IGF-I concentration (y, ng/ml): y = $0.80x^2$-4.53x+190.24, $r^2$ = 0.51, n = 12, p = 0.009. No significant correlation was found between plasma IGF-I (x, ng/ml) and N retention (y, g/d) (p>0.05). It was concluded that Met level had a significant influence on N retention and plasma IGF-I concentration whereas IGF-I might not be an important mediator in the regulation of N metabolism by Met in growing sheep nourished by total intragastric infusions.

• The Journal of Advanced Prosthodontics
• /
• v.9 no.4
• /
• pp.308-314
• /
• 2017

PURPOSE. The purpose of this study was to analyze the retention force changes and wear behaviours of double-crown systems over long-term use. MATERIALS AND METHODS. Ten groups, each consisting of six samples, were evaluated. Specifically, casting gold alloy primary crown - casting gold alloy secondary crown (AA), laser sintering primary crown - laser sintering secondary crown (LL), casting Cr alloy primary crown - casting Cr alloy secondary crown, (CC) zirconia primary crown - electroformed secondary crown (ZA), and CAD/CAM titanium alloy primary crown - CAD/CAM titanium alloy secondary crown (TT) groups were evaluated at cone angles of $4^{\circ}$ and $6^{\circ}$. The samples were subjected to 5,000 insertion-separation cycles in artificial saliva, and the retention forces were measured every 500 cycles. The wear levels were analyzed via SEM at the beginning and end of the 5,000 cycles. RESULTS. In all samples, the retention forces increased when the conus angle decreased. The highest initial and final retention force values were found in the $LL-4^{\circ}$ group (32.89 N-32.65 N), and the lowest retention force values were found in the $ZA6^{\circ}$ group (5.41 N-6.27 N). The ZA groups' samples showed the least change in the retention force, and no wear was observed. In the other groups, wear was observed mostly in the primary crowns. CONCLUSION. More predictable, clinically relevant, and less excursive retention forces can be observed in the ZA groups. The retention force values of the LL groups were statically similar to those of the other groups, except the ZA groups.

• Journal of Korean Society of Environmental Engineers
• /
• v.29 no.2
• /
• pp.229-234
• /
• 2007

In the present work, the sequencing batch reactor process of two-sludge type was optimized. The effects of solid retention time, hydraulic retention time, length of biosorption phase and temperature variation were investigated, respectively. In the T-N removal, the long solid retention time was favored. It was speculated that SCOD biosorption efficiency was higher in long solid retention time than in short solid retention time. In the comparison of hydraulic retention time, the removal efficiency of $NH_4^+-N$ and T-N were almost same in all applied hydraulic retention times which were 8 hr, 10 hr and 15 hr. It was observed that there was no need to have the hydraulic retention time more than 20 min in biosorption phase for enhancement of T-N removal efficiency. An experimental comparison of removal efficiencies with different temperature conditions was carried out. Decrease of temperature didn't affect the performance of the process, however, phosphorus removal efficiency was a little higher at low temperature than high temperature. Consequently, the process developed in this study was much amenable to wastewater treatment which was conducted in the low temperature and high loading rate.

• Bulletin of the Korean Chemical Society
• /
• v.29 no.5
• /
• pp.979-984
• /
• 2008

In this study, 8 solutes (aniline, caffeine, p-cresol, ethyl benzene, methylparaben, phenol, pyridine, and toluene) have been tested in terms of linear solvation energy relationships (LSER). Several micellar liquid chromatography (MLC) systems using cationic surfactant cetyltrimethylammonium bromide (CTAB) and a mixture of water with (methanol, n-propanol, and n-butanol) modifiers were characterized using the LSER solvation parameter model. The effects of the surfactant and modifier concentration on the retention in MLC were discussed. LSER model had demonstrated high potential to predict retention factors with high squared correlation coefficients ($r^2$ > 0.99). A comparison of predicted and experimental retention factors suggests that LSER formalism is able to reproduce adequately the experimental retention factors of the solutes studied in the different experimental conditions investigated. This model is a helpful tool to understand the solute-surfactant interactions and evaluate the retention characteristic of micellar liquid chromatography.

• Journal of environmental and Sanitary engineering
• /
• v.11 no.3
• /
• pp.63-68
• /
• 1996

This study was to discuss limiting factors influenced on the removal efficiencies of nitrogenous compounds investigated using the polypropyrene media which was to attach microorganism in order to apply the fixed-biofilm process. The main limiting factors are the hydraulic retention time (HRT), C/N ratio, $COD/NO_{3}-N$ ratio and temperature. The hydraulic retention time HRT were 6, 8, 10, 12 hrs and the C/N ratio range was 2.5-9.5. The $COD/NO_{3}-N$ ratio range was 3.2-21.9 and the temperature were 15, 20, 25, 30, $35^{\circ}C$, respectively. The results of this study are summerized as follows. 1. Hydraulic retention time (HRT) to obtain removal efficiencies of T-N higher than 85% had to be 10 hrs above. 2. The removal efficiencies of T-N decreased at C/N ratio from 6.2 to 4.8 in this anoxic-contact aeration system. 3. Denitrification rate decreased at $COD/NO$_{3}$-N$ ratio from 8.0 to 5.0 4. As temperature increased, removal efficiencies of T-N increased.

• Asian-Australasian Journal of Animal Sciences
• /
• v.22 no.6
• /
• pp.803-811
• /
• 2009

The chemical composition and water extractable dry matter (DM) of foliages from Erythrina (Erythrina variegata), Fig (Ficus racemosa), Jackfruit (Artocarpus heterophyllus), Jujube (Ziziphus jujuba Mill), Kapok (Ceiba pentandra) and Mango (Mangifera indica) and the feed intake, digestibility and N retention when feeding these foliages were studied in two experiments. In Experiment 1, 12 male goats, 3.5 months old and weighing 14.6 kg, were randomly allocated to a diet consisting of one of the foliages in a change-over design with three periods. The foliages were offered ad libitum at the level of 130% of the average daily feed intake. The Erythrina foliage had a low content of DM and condensed tannins (CT) and a high concentration of crude protein (CP) in leaves plus petioles (193 g/kg DM) and stem, while the Mango foliage had a low CP (69 g/kg DM) and high DM content. The other foliages were intermediate. High content of CT was found in the leaves plus petioles of Jackfruit foliage and in the stem of Fig and Mango foliage. There was a difference in feed intake, nutrient intake, apparent digestibility and N retention between the foliages, with Erythrina, Jackfruit and Kapok foliage being significantly higher in these parameters than Fig, Jujube and Mango foliage. The water extractable DM could be used to estimate N retention, but not DM digestibility in this study. In Experiment 2, 4 male goats weighing 13.4 kg and 6 months old were allocated to a 4${\times}$4 Latin square design. The treatments were: water spinach ad libitum and Fig, Jujube or Mango foliage ad libitum +0.5% of BW as water spinach DM. Feed intake, apparent digestibility and N retention were not significantly different among the foliage diets, but higher than for water spinach alone (p<0.05). Supplementation with water spinach to a diet consisting of low quality foliages such as Fig, Jujube and Mango, increased DM and CP intake, apparent digestibility and N retention, compared to feeding these foliages as sole feeds.

• Journal of Ecology and Environment
• /
• v.31 no.3
• /
• pp.167-176
• /
• 2008

Atmospheric N deposition has far-reaching impacts on forest ecosystems, including on-site impacts such as soil acidification, fertilization, and nutrient imbalances, and off-site environmental impacts such as nitrate leaching and nitrous oxide emission. Although chronic N deposition has been believed to lead to forest N saturation, recent evidence suggests that N retention capacity, particularly in the forest floor, can be surprisingly high even under high N deposition. This review aims to provide an overview of N retention processes in the forest floor and the implications of changing C-N interactions for C sequestration. The fate of available N in forest soils has been explained by the competitive balance between tree roots, soil heterotrophs, and nitrifiers. However, high rates of N retention have been observed in numerous N addition experiments without noticeable increases in tree growth and soil respiration. Alternative hypotheses have been proposed to explain the gap between the input and loss of N in N-enriched, C-limited systems, including abiotic immobilization and mycorrhizal assimilation, both of which do not require additional C sources to incorporate N in soil N pools. Different fates of N in the forest floor have different implications for C sequestration. N-induced tree growth can enhance C accumulation in tree biomass as observed across temperate regions. C loss from forests can amount to or outweigh C gain in N-saturated, declining forests, while another type of 'C-N decoupling' can have positive or neutral effects on soil C sequestration through hampered organic matter decomposition or abiotic N immobilization, respectively.

• Journal of Animal Environmental Science
• /
• v.3 no.2
• /
• pp.97-104
• /
• 1997

This research was carried out to determine the effect of dietary calcium(Ca) levels(low : 0.29, medium : 0.65 and high : 1.07%) on the digestibility, excretion and retention of nitrogen(N) phosphorus (P) in pigs fed diets supplemented with phytase(750U/kg). Twelve growing-finishing pigs(average body weight: 35kg) were divided into 3 groups and these pigs were reared in metabolism cage. After 10 days adaptation period, N and P balance experiments were carried out for 4 days. The results were summarized as follows ; 1. The High-Ca group was lower than the others in digestibility of P(Low-Ca and Medium-Ca group). 2. The amount of daily excretion of urinary N were 19.6g in Low-Ca group and 16.7g in high-Ca group. The High-Ca group was the lowest(22.71%/d) in the total N excretion. 3. The High-Ca group was the highest and the Low-Ca group the lowest in fecal P excretion. The urinary P excretions per day were 1.90g in Low-Ca group and 0.04g in High-Ca group. The medium-Ca group showed the lowest total P excretion(4.57g/d). 4. The N retention of the High-Ca group(20.50g) was greater than that of the Low-Ca group and Medium-Ca(5.02)g was the highest and the Low-Ca groups(3.92g) was the lowest in the P retention. These results indicate that dietary Ca level was an important factor influencing N and P utilization in pigs.

• Journal of Technologic Dentistry
• /
• v.45 no.3
• /
• pp.61-66
• /
• 2023

Purpose: The current study examined the retention and wear resistance of stud-type attachments made of high-performance polyetheretherketone (PEEK) or polyetherketoneketone (PEKK) from the polyaryletherketones (PAEKs) family. Methods: The study sample included 10 PEEK or PEKK attachments that were mounted onto their male parts, designed on the upper aspect of the attachment, with a load of 30 N. Tensile stress was applied using an Instron machine to separate the male and female parts, and the maximum tensile stress to be applied was determined based on the retention force observed. The wear resistances of PEEK and PEKK were evaluated by measuring the inner diameter of the inserted female part 10 times. Results: The maximum tensile stresses of PEEK and PEKK were 56.26±0.58 and 69.12±0.92 N, respectively, with the maximum stress required to remove the PEKK specimens from the abutment being 12.86 N higher than that required to remove the PEEK specimens. Furthermore, PEKK exhibited higher wear resistance than PEEK. Conclusion: This study evaluated custom-made removable implant-retained attachment components for overdentures, wherein the female parts were made of PEEK or PEKK. The retention stress and wear resistance were evaluated based on the type of attachment material, and the results showed that both types of attachment inserts demonstrated clinically acceptable results in terms of retention.

• KSBB Journal
• /
• v.20 no.4
• /
• pp.260-265
• /
• 2005

In this work, molecular imprinted polymers (MIPs) using the template of the N-CBZ (carbobenzyloxy)-L-phenylalanine, MAA and 4-VPY as a monomer, EGDMA as a crosslinker and AIBN as an initiator were considered. The prepared polymer particles $(Ca.\;25-35\;{\mu}m)$ were packed into a chromatographic column $(3.9\;\times\;150\;mm)$. The chromatographic characteristics of the retention on the MIP were experimented with acetonitrile as a mobile phase at the flow rate of mobile phase, 0.5 ml/min. The retention factors and resolutions of chiral racemate of the N-CBZ-D, L-phenylalanine were measured. The results showed that the retention factor and resolution by the two co-monomer imprinting polymer were higher than the single monomer imprinting polymers, which indicated an increase in the affinity of the MIP with the sample as a result of the cooperation effect of the binding sites.