• Journal of the Korea Society of Computer and Information
• /
• v.18 no.2
• /
• pp.19-30
• /
• 2013

We study sub-Peres functions that are defined recursively as Peres function for random number generation. Instead of using two parameter functions as in Peres function, the sub-Peres functions uses only one parameter function. Naturally, these functions produce less random bits, hence are not asymptotically optimal. However, the sub-Peres functions runs in linear time, i.e., in O(n) time rather than O(n logn) as in Peres's case. Moreover, the implementation is even simpler than Peres function not only because they use only one parameter function but because they are tail recursive, hence run in a simple iterative manner rather than by a recursion, eliminating the usage of stack and thus further reducing the memory requirement of Peres's method. And yet, the output rate of the sub-Peres function is more than twice as much as that of von Neumann's method which is widely known linear-time method. So, these methods can be used, instead of von Neumann's method, in an environment with limited computational resources like mobile devices. We report the analyses of the sub-Peres functions regarding their running time and the exact output rates in comparison with Peres function and other known methods for random number generation. Also, we discuss how these sub-Peres function can be implemented.

• Korean Journal of Environmental Agriculture
• /
• v.16 no.4
• /
• pp.382-389
• /
• 1997

To study the optimum conditions of composing with sewage sludge, the variations of temperature and $CO_2$ generation amount during composting periods were investigated. The conditions were that sewage sludge added to bulking agents such as sawdust and rice hull were used and differently treated with microorganism seeding or not, initial C/N ratio, air flow rate and initial moisture contents. The results were summarized as follows : Seeding of 5% microorganism was higher temperature than not seeding. And using rice hull as bulking agents, and adjusting 21${\sim}$22 of initial C/N ratio, $200ml/l\;{\cdot}\;min$. of air flow rate and 64${\sim}$65% of initial moisture contents were higher temperature than any other conditions. Seeding of 5% microorganism was more $CO_2$ generation amount than not seeding. And using saw dust was more $CO_2$ generation amount than using rice hull as bulking agents. In the case of initial C/N ratio, adjusting 21${\sim}$42 was also more $CO_2$ generation amount than adjusting 12${\sim}$14. Judging from the result, it should be considered that the optimum conditions of composting with sewage sludges were seeding of 5% microorganism and adjusting 21${\sim}$22 of initial C/N ratio, $200ml/l\;{\cdot}\;min$. of air flow rate and 64${\sim}$65% of initial moisture contents.

• Journal of the Korean Institute of Gas
• /
• v.26 no.6
• /
• pp.37-44
• /
• 2022

In this study, two low-swirl nozzles with the same SN (Swirl Number) but different mass ratio (m) of the core part and the swirler part were designed to perform an atmospheric pressure combustion test. For each nozzle, a combustion test was conducted according to the adiabatic flame temperature, and the flame structure, emissions, and combustion instability mode were identified. Although the flame structure was significantly different, the CO emission was similar, and the NOx emission was also more related to combustion dynamics than the flame structure. Combustion dynamics and NOx emission were identified while adjusting the convection delay time by changing the position of the fuel injection nozzle. It was confirmed that when the convection delay time is in the region of (3+4n)/4T±1/4T (n=0,1,2,...), the combustion instability is strong, and in the opposite case, the combustion instability is very weak.

• Journal of Family Resource Management and Policy Review
• /
• v.28 no.2
• /
• pp.39-50
• /
• 2024

This study analyzed the composition of the time use and childcare time use of working mothers and fathers of Generations X and Y, differences between generations, differences between mothers and fathers, and factors affecting childcare time. We analyzed the lifetimes of working parents of preschool children(n=2,287) using Statistics Korea's Time Use Survey for 2014 and 2019. The main results are as follows: First, when comparing the lifetimes of Generations X and Y, in 2014, Generation Y mothers had longer commuted times, whereas for fathers, there was no difference between generations. Second, comparing the time use of Generations X and Y, regardless of the survey period, Generation Y mothers had longer sleep times than their counterparts, while Generation Y fathers had longer time in sleep, home management, and childcare than their counterparts. Third, in analyzing the factors affecting parents' childcare time for mothers of both generations, the less sleep times, mealtimes, working times, commuted times, home management times, and leisure times, the longer the childcare times. In the case of fathers, for Generations X and Y, the less sleep times, mealtimes, market work times, commuted times, and leisure times, the more childcare times. However, in Generation X fathers, home management time and the gender role attitude affect childcare time. While the generation gap was not clear for mothers, it was confirmed for fathers. Therefore, it was proposed not only gender differences but also generational characteristics should be taken into account to provide implications for child care policies, especially for fathers, in community care support systems incluing education and counseling programs.

• Journal of Korean Society of Coastal and Ocean Engineers
• /
• v.27 no.1
• /
• pp.38-49
• /
• 2015

Past study of tsunami heavily relied on the numerical modelling using 2D Boussinesq Eq. and Solitary wave. Lately, based on the fact that numerically simulated run up heights based on solitary wave are somewhat smaller than the measured one, Leading Depression N (LDN) Wave has been elaborated, which can account the advancement of a shore line before tsunami strikes a shore. Thereafter it is reported that more accurate simulation can be possible once LDN is deployed. On the other hand, there were numerous reports indicating that stable LDN wave can't be sustained in the hydraulic model test. These conflicts between the hydraulic model tests and numerical results have their roots on the assumption made in the derivation of Boussinesq type wave model such as that wave nonlinearity is equally balanced with wave dispersiveness. Hence, in the numerical simulation based on the Boussinesq type wave model, wave dispersiveness is inevitably underestimated, especially in deep water. Based on this rationale, we developed the modified methodology for the generation of stable LDN wave in the 3D numerical wave flume, and proceeded to numerically analyze the depression effect of Hybrid Breaker on the run up height due to tsunami using the Navier Stoke Equation. The verification of newly proposed wave model in this study was carried out using the run up height from the hydraulic model test. It was shown that Hybrid Breaker consisting of three water chamber and slope at its front can reduce 13% of run up height for H = 5m, and 10% of run up height for H = 6m.

• Proceedings of the KIEE Conference
• /
• 2002.07b
• /
• pp.1335-1337
• /
• 2002

This paper presents experimental operation with utility interactive 50kw photovoltaic generation system. And that describe configuration of utility interactive photovoltaic system which power supply for dormitory. The status of photovoltaic generation system components and interconnection and safety equipment will be summarized. This paper discusses property operation state which system endure division of power for dormitory.

• Proceedings of the KWS Conference
• /
• v.43
• /
• pp.171-173
• /
• 2004

Electromagnetic force is one of the most important factor that effect on metal transfer mode, short-circuit rate, spatter generation rate and mechanical properties of weld metal etc. Also, shielding gas and welding current have influence on metal transfer mode in GMAW. In this paper, different ways for external electromagnetic forces are applied by attaching cylindrically rounded conducting wire solenoid on touch tip holding. With the applied electromagnetic field, the arc transfer mode changes from normal mode to rotating mode and spatter generation decreased in electromagnetic fields(N-pole). In MIG welding, the influences of electromagnetic force on the spatter generation showed different tendency as in the $CO_2$ welding. It is possible reasons were discussed.

• Korean Journal of Cognitive Science
• /
• v.3 no.1
• /
• pp.79-111
• /
• 1991

This paper suggests a system which analyzes facial images through hypotheses generation and verification.A model knowledge on faical structures is to be represented in a hieratchical frame system and the process of hypothesis generation and verification is to be embodied through linking upper lower-level frames.This paper especially addresses the problem of how to selec an approproate knowledge at each stage of hypotheses generation and verification.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.16 no.6
• /
• pp.1209-1216
• /
• 2012

Smart TV is approaching as a new media service to integrate the broadcasting and the internet according to the technology evaluation of convergence to broadcasting, telecommunication, and computing. Therefore, This paper proposes the next generation smart TV(Smart TV 2.0) technology based on CPNT which supports those services such as the broadcasting, telecommunication, a convergence of broadcasting & communication, and computer service through multi-screen. Also, this paper describes the concept and details of the related technologies.

• Journal of applied mathematics & informatics
• /
• v.6 no.2
• /
• pp.553-568
• /
• 1999

This paper is of concern to queueing analysis of the dynamic rate leaky bucket(LB) scheme in which the token generation interval changes according to the buffer state at a token generation epoch. Cell arrivals are assumed to follow a Markovian arrival process (MAP) which is weakly dense in the class of the stationary point processes. By using the embedded Markov chain method we obtain the probability distribution of the system state at a token generation epoch and an arbitrary time. Some simple numerical examples also are provided to show the effects of the proposed LB scheme.