• 융합신호처리학회논문지
• /
• 제7권2호
• /
• pp.65-72
• /
• 2006

디지털신호처리에 있어서 신호의 다상분해(polyphase decomposition)는 멀티레이트(multirate) 시스템 구현에 있어서 다양한 용도로 사용된다. 특히 디지털 필터설계 등에 있어서 다채널 신호를 제공함으로써 병열연산을 가능하게 하여 알고리즘의 성능을 개선하는데 특히 유용하다. 일반적으로 다상분해신호는 원신호를 다운샘플링을 위해 데시메이션(decimation)하기 때문에 원신호에 비해 많은 고주파 성분을 포함하여 주파수 대역이 확장되는 경향이 있다. 이러한 성질은 다상분해신호의 활용, 즉 디지털 신호처리 시스템의 구조나 성능에 상당한 제약을 초래한다. 따라서 본 연구에서는 다상분해신호에 대한 완전 대역압축 및 복원 방법을 이론적으로 제시하고 Matlab 시뮬레이션을 통하여 그 유효성을 확인한다.

• 전자공학회논문지S
• /
• 제34S권12호
• /
• pp.60-69
• /
• 1997

We present an average method based on the multirate signal processing and dynamic allocation average for the purpose of monitoring event-related potentials(ERP) and continuously and dynamically. In the proposed method, first, latency shifts are detected through the cross correlation between a current response and the reference response. Then, the multirate signal processing which is composed of up-sampler, lowpass filter, and down sampler is performed to compensate the latency shifts of the reference response, therefore we obtain the reference response with a peak latencies compenated by those of a current response. Finally, the single response is obtained by averaging the compensated reference response and a current response. In the simulation, the results of quantitative evaluation by simulation and the results using linical data are presented. From the result, the proposed method reflects dynamic time-varying ERP more exactly than previous methods and is also effective in consecutive monitoring of ERP.

• 대한의용생체공학회:의공학회지
• /
• 제17권2호
• /
• pp.209-214
• /
• 1996

The display of biological signals in raster scan monitors often involves a multirate sampling operation which consists of decimation .and interpolation. All electroencephalouaphic (EEG) samples of 10 to 30 seconds (2, 500 to 7, 500 samples at 250[Hz] sampling frequency) must be displayed in the computer screen to keep the aspect ratio of the paper polygraph output. Since the current afrorclable display technology Plots at most 2, 000 Pixels Per row, sDme signal samples need to be discarde4 This Paper studies methods to perform this operation characterizing them from the signal processing viewpoint and compares the display quality among several decimation techniques. Experimental results show that a nonlinear operation such as the peak detection method could be preferable to the canonical linear filtering to reduce aliasing.

• 융합신호처리학회 학술대회논문집
• /
• 한국신호처리시스템학회 2003년도 하계학술대회 논문집
• /
• pp.141-144
• /
• 2003

This paper proposes a design method of a CDBC(Continuous-time Deadbeat Controller)system that takes into account the response between the sampling instant and using second-order smoothing elements. The continuous deadbeat controller is composed of a serial integral compensator and a local feedback compensator introduced into the state feedback loop. A DC servo motor is chosen for implementing CDBC algorithm. Especially according to the variable input and disturbance, corresponding CDBC design method is suggested. A Matlab Simulink is used for simulation with the Motor parameter. By computer simulations, control inputs and system outputs are shown to have desirable property such as smoothness.

• 전기학회논문지
• /
• 제59권11호
• /
• pp.2108-2113
• /
• 2010

The Long Term Evolution (LTE) system is based on the Orthogonal Frequency Division Multiplexing (OFDM) and relies its channel estimation on the lattice-type pilot samples in the multipath fading channel environment. The estimation of the channel frequency response (CFR) makes use of the least squares estimate (LSE) for each pilot samples, followed by an interpolation both in time- and in frequency-domain to fill up the channel estimates for subcarriers corresponding to data samples. Any interpolation scheme could be adopted for this purpose. Depending on the requirements of the target system, we may choose a simple linear interpolation or a sophisticated one. For any choice of an interpolation scheme, these is a trade-off between estimation accuracy and numerical cost. For those wireless communication systems based on the OFDM and the preamble-type pilot structure, the DFT-based channel estimation and its variants have been successfully. Yet, it may not be suitable for the lattice-type pilot structure, since the pilot samples are not sufficient to provide an accurate estimate and it is known to be sensitive to the location as well as the length of the time-domain window. In this paper, we propose a simple interpolated based on the upsampling mechanism in the multirate signal processing. The proposed method provides an excellent alternative to the DFT-based methods in terms of numerical cost and accuracy. The performance of the proposed technique is verified on a multipath environment suggested on a 3GPP LTE specification.

• 한국군사과학기술학회지
• /
• 제3권1호
• /
• pp.58-65
• /
• 2000

A target signal simulation method for passive sonar systems is introduced. The method uses multirate signal processing techniques to simulate moving target signals in the multi-path sound propagation environment by introducing Lloyd's mirror and Doppler effect. Time and frequency variation of target signal due to the target maneuvering is also considered to provide realistic ship signatures in the LOFAR gram so that the simulated target is used for sonar operator training. Synthesized target characteristics is analyzed and compared with real target signal in terms of interference pattern and frequency variation in the LOFAR gram.

• 융합신호처리학회논문지
• /
• 제4권4호
• /
• pp.47-51
• /
• 2003

디지털제어에 잘 사용되어 온 유한정정제어를 연속계에 적용하기는 연속계의 점근성 때문에 어려운 것으로 알려져 있다. 그러나 유한 Laplace변환을 전달함수에 적용하고 여기에 정정조건을 적용하여 제어기를 설계한 연속계 유한정정제어기(CDBC, Continuous-time Deadbeat Controller)에 대해서 연구가 되고 있다. 이에 따라 지연요소가 전달함수에 사용되어 정정을 위한 차수 및 보간조건이 유도되어 제어기가 설계되거나, 디지털 유한정정제어기를 설계하고 이를 연속계 제어기로 변환하기 위해 평활요소로 사용하여 CDBC를 구성하기도 한다. 본 논문에서는 다중 샘플링을 적용하여 제어기와 출력귀환루프의 샘플링 속도를 달리하였으며, 2차 평활요소를 디지털 유한정정제어기에 사용한 CDBC를 연구한다. 이러한 다중 샘플링은 샘플링 주기 동안에 제어루프를 또 샘플링하여 전체적인 출력응답을 개선할 수 있다. 제어기는 직렬 적분 보상기를 전향경로에 배치하고 지역 귀환보상기를 귀환 루프에 도입한다. Matlab Simulink을 사용하여 시뮬레이션을 한다.

• 전기학회논문지
• /
• 제62권7호
• /
• pp.1020-1026
• /
• 2013

Multirate filtering process on the biological signals like Electrocardiogram (ECG) and Photoplethysmogram (PPG) can be defined as the digital signal processing algorithm in which the sampling rate varies to omit or interpolate the intermediate values between the sampled data. With this aim, we suggest a new multirate filtering algorithm by deleting the extraneous data to eliminate the unwanted degradations such as granular noise due to the usage of high sampling frequency and simultaneously to detect the fiducial features of ECG and PPG with reducing the complexity of resolving fiducial points such as R-peak, Pulse peak and Pulse Transit Time (PTT). After the experimental simulations performed, we can conclude the fact that we can detect the fiducial features of ECG and PPG signal in terms of R-peak, Pulse peak and PTT without the loss of accuracy even if we do not maintain the original sampling frequency.

• 대한의용생체공학회:학술대회논문집
• /
• 대한의용생체공학회 1996년도 춘계학술대회
• /
• pp.311-314
• /
• 1996

The display of biological signals in monitors often involves a multirate sampling operation which consists of decimation and intenolation. All electroencephalographic (EEG) samples of 10 to 30 seconds must be displayed in the computer screen to keep the aspect ratio of the paper polygraph output. Since the current affordable display technology plots at most 2,000 pixels per row, some samples need to be discarded. This paper studies methods to perform this operation characterizing them from the signal processing viewpoint and compares the display quality among several decimations. Experimental results show that a nonlinear operation such as the peak detection could be preferable than the canonical linear filtering to reduce aliasing.

• 전기의세계
• /
• 제45권6호
• /
• pp.9-14
• /
• 1996

웨이브렛 변환은 1910년의 Haar웨이브렛[2]으로 거슬러 올라가는 수학적 배경을 가짐과 동시에, multirate-filter bank라는 신호처리(signal processing)를 이용한다. 웨이브렛 변환은 많은 신호처리에 사용될 수 있는 매우 일반적인 방법을 제공한다. 1절의 나머지 부분에서는 웨이브렛 변환이 나타나게 된 배경, 2절은 웨이브렛 변환은 수식적 정의, 3절은 웨이브렛의 응용분야, 4절은 발전된 웨이브렛의 모습에 대해서 기술한다.